Repairing of Permanent Quarters (10 Nos.) at Ithai.

Amount

Demolition above G.L up to floor two level including disposal of unserviceable materials with 50m lead.13.6.1 unreinforced cement concrete up to 15 cm thickness.

Dismantling sheet roofing including ridges, hips, valleys, gutters etc. stacking the serviceable material and disposal of unserviceable material within 50m lead. 13.27.1 G.I sheet roofing.

Dismantling old plaster or skirting raking out & cleaning the surface for re-plaster i/c disposal of rubbish within 50metres.

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift up to 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. b) Hard/Dense Soil.

Steel Reinforcement for R.C.C work including straightening, cutting, bending and placing in position and binding all complete. b) Thermo-Mechanically treated bar.

Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4m and removal of the same for in-situ reinforced concrete and plain concrete work in. 4.1.1) Foundation, footing, base of columns etc. and mass concrete.

Providing and laying position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level 1:1.5:3(1 cement :1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4mt and removal of the same for in-situ reinforced concrete and plain concrete work in. 4.1.7.1) column, pillar, posts, and struts (square, rectangular or polygon in plan).

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttress, plinth and string courses, fillets, columns, pillars, piers, abutments, post and struts etc. upto floor Five level i/c plastering the exposed surface with cement 1:3 (1cement: 3 fine sand) of thickness not exceeding 6mm thickness to give a smooth and even surface but excluding the cost of centering - shuttering & reinforcement. 3.2.2) 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4mt and removal of the same for in-situ reinforced concrete and plain concrete work in. (4.1.8.2) Sides or soffits of beams, beam hunching, cantilevers, girders, bressumers and lintels not exceeding 1m in depth.

Reinforcement cement concrete work in beams, suspended floors, roofs having slope up to 15°landing, balconies, shelves & chajjas, lintels, bands, plain window sills, staircases and spiral stair case up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement :1.5 coarse sand:3 graded stone aggregate 20mm nominal size).

12mm cement plaster 1:4 (1cement: 4 coarse sand).

6mm cement plaster to ceiling 1:4 (1 cement: 4 fine sand)

Applying one coat of cement primer of approved quality on wall surface.

Distemper with dry distemper of approved quality (one or more coats) to give an even shade on old work.

Finishing walls weather shield paint of approved quality on new work (three or more coats) to give even shade.

Providing wood works in frames of doors windows clerestory windows & other frames wrought framed & fixed in position 7.1.3 Local best quality Leihao

P/F 35mm thick panelled, glazed or panelled & glazed shutter for door, windows and clerestory windows i/c bright finished or black enamelled MS Iron hinge butt hinges with necessary screws. Uningthou wood

Painting two coats (excluding priming coat) with chocolate, red grey of buff paint of approved quality on old steel or wood work.

Providing & fixing aluminium handles with necessary screws etc. complete. 7.93.1) 125mm.

Providing & fixing aluminium. Tower bolts (barrel type) with screws etc. complete. 7.90.1) 250x10mm

Providing & fixing Aluminium sliding bolts bright finished or black enamelled with nuts & screws etc. complete. 7.87.1) 300x16 mm

Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S 15622, of approved make, in all colours and shade, in skirting, riser of steps over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc complete. size of tile 300x300 mm (Single charged) Non branded

Providing & laying six course water proofing treatment with bitumen felt over roofs consisting of first, third & fifth course of blown or/and residual bitumen applied hot at 13.61 kg & 15.88 kg per 9.29 Sqm of area respectively, second & fourth courses of roofing felt type 3 grade 1 hessian base self finished bitumen felt & sixth & final course of stone grit 6 mm & down size or pea size gravel spread at 0.06 cum per 9.29 Sqm i/c preparation of the surface etc. complete.

25mm cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 stone aggt. 20 mm & down gauge) finished with a floating coat of neat cement.

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering. (2.1.3) 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm normal size)

Providing & fixing panelled glazed or panelled & glazed shutter for door, windows, clerestory window, cupboard shutters with ply wood/ particle board/ hard board/ Asbestos sheet i/c providing anodised aluminium but hinges/ bright finished brass hinges with screws etc. complete for all sizes (particle board/ply wood/hard board/Asbestos sheet/ glass/ hinges & screws to be measured & paid for separately 7.22.2 35mm thick.

Polygonal rubble masonry/R.R masonry (uncoursed /brought to courses)/ squared rubble masonry (uncoursed/ brought to courses) with hard stone of approved quality in foundation & plinth in cement mortar 1:6 (1 cement: 6 fine sand) i/c levelling up with cement concrete 1:6:12 (1 cement: 6 course sand: 12 stone aggregate 20mm nominal size) at plinth level.

Providing and fixing water storage tanks with 400 mm diameter nominal base G.I. overflow tube 25mm nominal G.I inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10m above ground level. 2000 litres net capacity storage tanks.

Providing and fixing water storage tanks with 400 mm diameter nominal base G.I. overflow tube 25mm nominal G.I inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10m above ground level. 500 litres net capacity storage tanks

Providing & fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plan & plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work- Exposed on wall. 15 mm nominal outer dia Pipes

Providing & Fixing GI Pipes complete with GI fittings i/c trenching & refilling etc. (External work). (25.6.3) 25mm diameter.

Providing & Fixing GI Pipes complete with GI fittings i/c trenching & refilling etc. (External work). (25.6.4) 32mm diameter.

Providing and fixing CP brass bib cock of approved quality conforming to IS: 8931 25.19.1 15mm nominal bore

Providing and fixing 600x20mm C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws (Hook type).fixed to wooden cleats with C.P. brass screws.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: Rectangular shape 453x357mm.

Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets, 15 mm CP brass pillar taps and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 24.12.1 kitchen sink with drain . 510x1040 mm bowel depth 250 mm

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete 24.32.1.1 32mm dia.

Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all 24.20.1 10 Litre capacity -White

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering. (2.1.8) 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm normal size)

Providing & fixing ball valve (brass) complete of approved quality. 25.13.1 - 15 mm dia.

Providing & fixing ball valve (brass) complete of approved quality. 25.13.3 - 25 mm dia.

Add EPF 3.25%

Add CESS 1%

Add GST @ 18% GST

M/S. R. K. ROMEO SINGH

M/S L JAYANTAKUMAR SINGH