WBHD/AE/ESD-I/eNIT-82/2024-25

Amount

Disconnection and dismentling the existing damaged E.I. and mending good the damages to original finish.

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make - Legrand/Schneider/Crabtree). 2+16 way Enclosure (607713)

Supplying and fixing 240 V, 40 Amp DP MCB Isolator on din rail of existing DBs and necessary connection (Make - Legrand/Schneider/Crabtree).

Supplying and fixing 240/415 V, 6-32 Amp, SP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Make - Legrand/Schneider/Crabtree).

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) for ECC in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall for horizontal & vertical runs and in suitable size PVC casing-capping (Precision make) for ceiling portion only, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment flushed in wall incl. mending good damages to original finish [only PVC casing-capping on ceiling and remaining portion concealed] (a) Average run 6 mtr

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish. 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC (a) On Board

S & F 250 Volt. 2 x 6 amp 5 Pin Modular type plug socket (Brand approve by EIC) with 2 x 6 amp Modular type switch, without plug top onGI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. (Separete plug) including 6 Module Switchboard

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supplying and fixing PVC casing-capping [Precision Make] on wall or ceiling, incl. necy. PVC fittings etc. and mending good damages to building works. (b)25x10mm Size

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works . (a) 19 mm dia 3 mm thick polythene pipe without earth continuity wire.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required (a) 3 x 22/0.3 (1.5 sqmm) (for separate plug avg. run 8 mtr)

(b) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC (for power plug, geyser, computer board for avg. run 15 mtr)

(C) 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC (for AC machine for avg. run 15 mtr) (3 nos)

S/F of LED tube light fittings Starlinepro 22W, 2200lm (Make-Philips/Crompton/Wipro) on the existing position.

Supply & Fixing 1200 mm ceiling fan (Make -Orient- energysaver49/Crompton/Havells - Metallic Ivory–Br) complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

S/F LED jojoba Mirror light fittings Complete with all acessorioes (Make - Philips, ( Toilet - 1, Dining - 1) (Make- Philips/CG/Wipro/ Havells)

Supply of Heavy duty exhaust fan 30 cm(12'')sweep 1420 RPM (Make EPC/Orient/CG) (for Toilet - 2, Kitchen - 1) full metal body

Fixing only exhaust fan after making hole in wall and making good amages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:(b) 30 cm (12")

Supply & Fixing AL louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) 30 cm Exhaust fan (12")) (for Toilet - 2, Kitchen - 1)

Supply & Fixing of Single Fancy Wall Bracket LED light fitting (Make - Philips, Model No-34304 or equivalent model of CG/WIPRO/Havells as approved by EIC/Authority/Havells FLORETINE WW E27SS) incl. 1 Nos 12 W LED Lamp (Make:-Philips or equivalent make) of warm white colour lamp complete with all acessorioes .

Supply and fixing of 240Volt 14 Watt LED Bulb (Philips/Magik/CG)

Add. G.S.T.@ 18% (on Total from item no 1 to 26) to be calculated by bidder

Add. LWC.@ 1% to be calculated (on total from item no 1 to 26 + GST@18%) by bidder

EFFORTECH (BID ID -6069269)

SIGMA ENTERPRISE (BID ID -6080984)