Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.9 LAccepted-AOC 164 SEC 21 A CHANDIGARH 160022 | CHANDIGARH | CHANDIGARH | 160022 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹39.4 L+₹65,745 (1.70%)Rejected-Finance 2076 2077 CHIRIMAR MOHALLA AMBALA CANTT 133001 HR | AMBALA | HARYANA | 133001 | L2 | Rejected-Finance Other Than Lowest Bidder | |
| 3 | L3₹40.5 L+₹1.8 L (4.56%)Rejected-Finance 17 KARAMCHARY COLONY UIT ROAD SRI GANGANAGAR RAJASTHAN 335001 | GANGANAGAR | RAJASTHAN | 335001 | L3 | Rejected-Finance Other Than Lowest Bidder | |
| 4 | L4₹48.9 L+₹10.1 L (26.2%)Rejected-Finance H NO 1566 2 SECTOR 30 B CHANDIGARH | NA | NA | 160001 | L4 | Rejected-Finance Other Than Lowest Bidder | |
| 5 | L5₹49.1 L+₹10.3 L (26.7%)Rejected-Finance H NO 312 B D C OPP PLOT NO 23 TRANSPORT AREA SECTOR 26 CHANDIGARH | CHANDIGARH | CHANDIGARH | CHANDIGARH | L5 | Rejected-Finance Other Than Lowest Bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
3 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandigarh
GE Chandigarh N Area Pin-160003
REPAIR/REPLACEMENT OF JOINERY IN JCOs/ORs MD AND OTM ACCN AND WELCOME MAINT TO OFFICER/JCO/OR MD ACCN AT N AREA AND HALLOMAJRA UNDER GE CHANDIGARH
2024_MES_662828_1
GE/CHD-26/2024-25
Open Tender
Civil Works
Item Rate
270 days
Chandigarh
Class D category a(i) for contractor enlisted in MES
7 documents required · 7 mandatory
₹500
GE Chandigarh
₹90,000
Yes
30 Oct 2024
29 Jun 2024
5 Sept 2024
29 Jun 2024
3 Sept 2024
13 Jul 2024
29 Jun 2024 - 5 Jul 2024
Amount
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and removal complete all as specified and as directed.
Taking down shutters of any description n exc 1 sqm each and removal complete all as specified and as directed.
Taking down chowkhats with shutters (without taking off shutter from frame) not exc 1.50 sqm each with mongry and making good the distrubed surfaces in CM 1:3 complete all as specified and as directed.
Taking down chowkhats with shutters (without taking off shutter from frame)exc 1.5 Sqm but exc 4 sqm each with mongry nd making good the distrubed surfaces in CM 1:3 complete all as specified and as directed.
Taking down shutters of any description exc 1 sqmm n exc 2 sqmm each but refixing after minor adjustments/ repair & easing complete all as specified and as directed.
M&L for Pressed steel frames of profile size 105mm x 60mm fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including cement concrete PCC 1:2:4( Type B-0) using 12.5 mm graded aggregate as in fillets including one shop coat of red oxide primer complete all as specified and as directed.
M&L for Pressed steel frames of profile size 125mm x 60mm fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including cement concrete PCC 1:2:4( Type B-0) using 12.5 mm graded aggregate as in fillets including one shop coat of red oxide primer complete all as specified and as directed.
S&F as in repair Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.
S&F 150 mm long aluminium anodised extruded section tower bolts staple & bolt and fixed to shutter complete all as specified and as directed.
S& F 150mm long extruded aluminium alloy handle in repair as fabricated type anodized complete all as specified and as directed.
S&F 125mm long extruded aluminium alloy handle fabricated type anodized complete all as specified and as directed.
S&F in repair 125 mm long aluminium anodised extruded section as in repair tower bolts fixed to shutter complete all as specified and as directed.
S &F 200 mm long aluminium anodised extruded section tower bolts, staple & bolt and fixed to shutter complete all as specified and as directed.
S &F in repair 200 mm long aluminium anodised extruded sectionhandle bolts and fixed to shutter complete all as specified and as directed.
S&F 300mm aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs complete all as specified and as directed.
S & F MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F in Hasp and staple 125 mm fancy type alluminum anodised complete all as specified and direccted.
M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete complete all as specified.
S&F PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube supplying and fixing in opening as per specification and drawing complete all as specified and as directed.
S&F for factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.
Supply and fix 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 35mm thick glazed and Skelton shutter of 2nd class hard wood ( except mango ) open rebated and prepared to receive glass, gauge etc (with out shash bars) divided into square plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR Part-I (2009) section 8-24(a) and fitted to chowkhat complete all as specified.
S&F factory made 25mm thick Flush shutters, solid core construction core and plywood face panels, commercial type with one faces are covered with decorative face veneer with lipping/frame to match, including two coat of synthetic enmel paint over a shop coat of pink primer complete all as specified & directed by Engr-in-Charge.
M&L for preparation of new wooden surface, of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint ( Ist quality) over a coat of pink primer complete all as specified and as directed.
M&L for Preparation of new steel surface, of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint ( Ist quality) over a coat of shop coat primer complete all as specified and as directed.
S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete with glazing bars , dovetailed or welded including cutting holes in brick wall in mud mortar for inserting hold fasts and making good dismantled portion in CM 1:3 and hold fast fixed with cement concrete 1:2:4 type B1 as required making good of finishings where required as per Drg No TD-277R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh complete all as specified and directed.
S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete without glazing bars , dovetailed or welded including cutting holes in brick wall in mud mortar for inserting hold fasts and making good dismantled portion in CM 1:3 and hold fast fixed with cement concrete 1:2:4 type B1 as required making good of finishings where required as per drawing No TD-276R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh complete all as specified and directed.
S&F steel ventilator fixed type including Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or hole fast fixed cement concrete 1:2:4 Type B-1 as required making good to facings where required complete all as specified and directed.complete all as specifed and directed.
S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.
S&F in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30mm fixed to door complete all as specified and as directed.
S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished all as directed.
M&L for Aluminum body peg set of 06 pegs as in repair complete all as specified and as directed
S&F 75 mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.
S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples fixe as in repair complete all as specified and as directed.
S&F for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire fixed complete all as specified and directed.
Demolition of brickwork or stone/boulders masonary, built in Cement mortar or cement lime mortar including all quoins,arches,pillers etc but excluding ashlar facing etc complete all as specified.
M&L for Brickwork with subclass ‘B’ burnt clay bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
M&L Brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:6) complete all as specified.
Taking down cement plaster on brick or concrete or stone wall surfaces including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.
M&L for 10mm thick cement plaster with cement sand mortar (1:6) on fair faces of brick or concrete surfaces finished even & smooth without using extra cement and including taking down cement plaster complete all as specified and as directed.
M&L rendering 5mm thick cement plaster on brick work or concrete surfaces including roof projections and chajjas as in ceiling surface in cement mortar (1:3) on ceiling finished even and smooth without using extra cement all as specified and directed.
Rendering 15mm thick cement plaster on brick work or concrete on wall surfaces including roof projections and chajjas of buliding at upto 10 mtr height in cement mortar (1:4) on wall/ceiling finished even and smooth without using extra cement all as specified and directed.
M&L for preparation of new plaster surface on wall and applying two coat of cement base paint complete all as specified and as directed.
M&L Preparation of new plaster surface of ceiling and applying three coat of white wash complete all as specified and as directed.
M&L for preparation of new plaster surface on wall and applying two coat of oil bound distemper over a coat of chalk whiting on newly plastered surfaces complete all as specified and as directed.
M&L for applying one coat acrylic emulsion on old wall/ceiling surfaces prepared by wall care putty of walls including preparation of surface complete all as specified and as directed.
M&L for applying one coat of oil bound distemper (Ist quality) including preparation of old walls surfaces by rubbing down,washing,& stopping of distempered surfaces complete all as specified and as directed.
M&L for complete removal of existing surface and applying two coat of oil bound distemper over a coat of primer on wall surfaces including and over 1mm thick wall care putty on wall/ceiling preparation of surfaces complete all as specified and as directed.
M&L for providing and applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified.
M&L for applying one coat of white wash old wall surface including preparation of old wall surface complete all as specified & as directed.
M&L for applying one coat of white wash on ceiling surface including preparation of surface complete all as specified & as directed.
M&L for applying one coat of cement base paint on old wall surface including preparation wall surfaces complete all as specified & as directed.
M&L for preparation of old treated wooden surfaces,inluding complete removal of existing treatment of any description with scrubber machine and applying two coat of french polishing inluding filling cracks/holes with filler material complete all as specified and as directed.
M&L for preparation of old wooden surface, of any description over 10cm width or girth and applying one coat of synthetic enamel paint (Ist quality) complete all as specified and directed.
M&L for Preparation of old steel surface, of any description over 10cm width or girth and applying one coat of synthetic enamel paint (Ist quality) complete all as specified and directed .
M&L for Raking out joints/ pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc. complete all as specified and directed .
Demolition of (reinforced) cement concrete in any description and in any position etc complete all as specified and as directed.
M&L for RCC (1:2:4) (using 20mm graded stone aggregate) as in slab, shelves etc with & including use and waste of form work complete all as specified and as directed. Note: Reinforced will be measured and paid seprately.
M& L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hopping for columns, hooking ends, and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to IS 1786-1985,( Fe- 500) complete all as specified and as directed
S&F in repairs drapery rods (fancy type) 25mm in dia with end MS brackets & funnels fixed with rawl plug and screws, complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed by Engr-In-Charge.
S&F 4 mm thick , sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 sqm in each pane complete all as speciifed and directed.
S&F 4mm thick Figured glass pin head type, glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm fixed to wdn frame in each pane complete all as specified and as directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for non skid Ceramic tiles 7 to 8 mm thick coloured area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with surfaces of tiles over 15mm thick bedding of layer of cement sand mortar (1:4) complete all as specified and as directed.
M&L for non skid Ceramic tiles 7 to 8 mm thick coloured area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with surfaces of tiles over 15mm thick bedding of layer of cement sand mortar (1:4) complete all as specified and as directed.
M&L for coloured vitrified tiles 8 mm to 9 mm thick (square rectangular) area of each tile exceeding 0.18 sqm but not exc 0.36 Sqm laid as in floors, set and jointed with cement slurry over & including 15mm thick bedding of layer of cement sand mortar (1:4) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed.
M&L for Glazed ceramic coloured /printed tiles of size 300mmx 450mmx7mm thick as in skirting/dado setting & jointed with neat cement slurry over & including 10mm thick rendering of cement sand mortar (1:4) and pointed with coloured cement to match with surface of tiles complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floors , aprons etc. laid, bedded and pointed in any mortar.
M&L for 18-20 mm thick granite machine cut stone slab (table rubbed polished) as in cooking platform , jamb, cill, step & riser setted and jointed with cement slurry and bedded over & including 15mm thick bedding layer of cement sand mortar (1:4), & pointed with white/ coloured cement including grinding, rounded and chamfered edges and granite polishing etc complete all as specified and as directed.
Taking down to 15mm bore steel tubing and connections removal from site complete all as specfied and as directed.
S&F 15mm bore steel water tubing medium grade, galvanized with all fittings and fixture fixed & concealed in wall/ceiling or laid in floors complete all as specified and as directed.
Refixing only GI water tubing of 15 mm bore with all new fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed
S&F as in repair Sink with drainage board made of stainless steel of wall thickness 1mm thick for kitchen or laboratory with plug, washers and wastes, including bedding in cement sand mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe overall size 915mm x460mm bowl size 410mm x 330mm x 160mm including waste pipe of suitable dia complete all as specified and as directed.
Supply & fix in repairs stainless steel kitchen plate rack made out of 1mm thick stainless steel of size 600 x 750 x 200mm with shelves and plate partition of pattern as approved by engineer-in-charge, fixed to wall by means of four nos rawal plugs complete all as specified and as directed.
S&F vitreous china wash down water closet (pedestal pattern) white with ‘ and including PVC P’ or ‘S’ trap, plastic seat cover white and connection to out going pipe & to flushing pipe, anti-syphonage pipe etc as in repair complete all as specified and as directed.
S&F vitreous china squatting pan Orissa pattern 580x440mm size mm white with integral foot rest (excluding flushing cistern and flush pipe) complete incl provision of lime concrete bedding, connection to trap and to flushing pipe, anti-syphoage pipe etc incl P or S trap fixed as in repair complete all as specified and as directed.
S&F for vitreous china white wash basin flat back of size 550mmx400mm coloured including MS brackets, cutting for and pinning in ends of brackets, including bottle trap/ PVC waste pipe as in repairs complete all as specified and as directed.
S&F for PVC plastic water closet seat cover (white coloured) closed pattern with flat bottom, cover and mild steel chromium plated or aluminium hinges device for pedestal pan fixed as in repair complete all as specified and as directed.
S&F PVC waste pipe 800 mm long suitable for 32 mm dia waste coupling, IN REPAIR, complete all as specified.
S&F spray jet chromium plated including suitable lengthof PVC connection pipe , fixed in repair complete all as specified and as directed.
M&L for Bib tap 15mm standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and as directed.
S&F Chromium plated towel stand, fixed in repair complete all as specified and as directed.
S&F chromium plated health fucet with hook, including suitable length of PVC connection pipe , fixed in repair complete all as specified and as directed.
S&F 15 mm bore Pillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15 mm bore iron pipe as in repair complete all as specified and as directed.
S&F for 15mm bore bib taps, cast copper alloy with CP long body, fancy type, screwed down, screwed for iron pipes or for brass ferrule and fixed in repair complete all as specified and as directed.
S&F for angle stop valve chromium plated, with crutch or butter fly handle screwed down, and fixed with 15mm bore iron pipe as in repair complete all as specified and as directed.
S&F for stop valve (concealed type) cast copper alloy fancy type chromium plated with long shank and cup screwed down, and fixed with 15mm bore iron pipe as in repair complete all as specified and as directed.
S&F Chromium plated shower rose 150mm square in shape with 450 mm long arm fixed in repair complete all as specified and as directed.
S&F PVC 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes IN REPAIR, complete all as specified.
S&F glass shelf assembly 5.5mm thick, 12 cm wide and 600 mm long fixed with & including chromium plated brass screws and ooden/plastic cleats fixed in repair complete all as specified and as directed.
S&F corner PVC shelf assembly (set of three of size 250x250mm,200x200mm &150x150mm) fixed in repair complete all as specified and as directed.
S&F for towel rail 600 mm long of chromium plated fixed with & including brass screws & wooden/plastic cleats, (minimum weight 90 gms) fixed in repair complete all as specified and as directed.
S&F for PVC connections with PTMT nuts of length 600 mm long fixed to 15 mm bore iron pipe or union as in repair complete all as specified and as directed.
Disconnecting existing tanks exc 250 ltr and n exc 500 ltrs in capacity for cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc and reconnecting and re-fixing in position complete all as specified and as directed.
All as per item No. 96 but exc 500 ltrs and n exc 1000 ltrs in capacity
M&L for tank nipple 15mm bore suitable for HDPE water tank.complet all as specified.
M&L for tank nipple 20mm bore suitable for HDPE water tank.complet all as specified.
S&F 10 litre capacity PVC Valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle incl bracket as fixed in repair complete all as specified and as directed.
S&F single piece WC of size 365x655x765 with flushing cistern and connection pipe, P or S trap (closed pattern incl all necessary accessories like rag bolts, kitt /gel gasket etc, including flushing cistern, pvc seat cover , jet and flush pipe complete all as specifed and directed.
S&F for CP soap dish holder in repair of complete all as specified and as directed.
Dismantling of PVC (SWR) Pipes of any size and description fixed in wall , jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.
S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F PTMT shelf 450 mm x 124 mm any colour with brass chromium plated screws & PVC rawl plugs (Minimum weight 300 gm) IN REPAIR, complete all as specified.
S&F for floor frap 75 mm PVC as in repair, laid in trenches or in floors complete all as specified and directed.
S&F 110 mm PVC (SWR) pipes PVC (SWR) bends any radius complete all as specified and directed
S&F 75 mm PVC (SWR)pipes PVC (SWR) bends any radius complete all as specified and directed
S&F 150 mm floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring, fixed complete all as specified and directed.
M&L ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed to 20 mm bore complete all as specified and directed.
S&F aluminium powder coated (min thickness of powder coating 50 micron) 3mm thick frame for door , windows, ventilators with one or more rebates including joining cleat/aluminium beading for fixing etc complete all as specified.
S&F aluminium powder coated (min thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section including necessary joining cleats/aluminium beading, glazing clips clips, ruber neoprene packing, handles 2 Nos, tower bolt 2 No in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
S&F aluminium powder coated (min thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars,including (double shutter) glazing bars and without glazing bars aluminium sections weighing not less 2.00 Kg/Rm including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), tower bolt 2 Nos complete all as specified
M&L for toughned glass 12mm thick as in hinged doors, partitions automatic doors and similar work including ss hinge, ss handle 2 Nos floor door spring fixing all ccessories, cutting to shape, drilling holes required and ruber, cleting, silicone,glazing with oil putty et complete all as specified and directed.
S&F 5 mm thick sheet glass pane tinted/plain/Figured glass type, with 5 micron thick black film ordinary quality and ruber, cleting, silicone,glazing with oil putty etc in each pane complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails/screw of any thickness, complete all as specified and directed.
S&F 18/19 mm HDMR board exterior grade, prelaminated one side with 1mm thick decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in kitchen cabinets,cupboards complet all fitting jointing etc complete all as specified and as directed.
S&F stainless steel cutlery pan basket or any other basket of any description/pattern as approved be GE, fixed with sliding channel, revolving wheels, fixed to wood based frame work, fixed in repairs, complete all as specified and directed.
S&F Stainless steel handle, fancy type, 125 mm size and fixed in position with stainless steel screws, ISI marked, suitable for rubber wood shutter drawer(s), complete as per the sample kept in the office of Engineer-in-Charge.
S&F Stainless steel auto close (dada) hinges suitable for PVC moulded shutter fixed in position with stainless steel screws, complete all as specified and directed.
S&F Stainless steel telescopic channel 400-500 mm long and fixed in position with stainless steel screws, ISI marked, suitable for cupboard drawers, complete as per the sample kept in the office of Engineer-in-Charge.
S&F in repair 50mm long magnatic catchers superior quality and fixed with screwscomplete all as specified and directed.
M&L for steel rolling shutters , (with lath thickness 1.25 mm ) with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and ; erected in position as indicated, complete: push pull or manual type gear operated type with bevel gear box and crank handle complete all as specified
S&F for Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified
Dismantling Plain or corrugated steel/AC/CGI/Fibre sheets sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.
S&F pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified fixed with self tapping screws as specified.
M&L pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed.
S&F Steel tubular section of any size and shape including special shaped washer fixing in any position including cutting, notching, drilling, riveting or welding and connecting with nuts and bolt etc.complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified.
M/s REEDIT CONSTRUCTION (BID ID -3069190)
JK ENGINEERS (BID ID -3066382)
MOHAMMAD RASHID (BID ID -3074184)
OJHA ENTERPRISES (BID ID -3065902)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .