PROVN OF STORE SHED OF SIZE 36.40 M X 6.10 M X 2.70 M ALONGWITH BASIC ELECTRIC FITTINGS ON THE PERIPHERY FOR STORAGE OF SRE SDE AND ACSFP STORES AT 14 CORPS OMC UNDER GE 865 EWS

Amount

Excavating in trenches, n. exc 1.5 m wide and n exc 1.5 m depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for laying cables/pipes, etc. n exc 10 sq m on plan in hard/dense soil and getting out soil, complete all as specified and as directed by Engineer-in-charge.

Surface Excavation not exc 30 cm deep and averaging 15 cm and getting out in soft/loose soil complete all as specified and directed.

M&L pre-cast cement concrete(20mm graded crushed granite stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 all as Specified by Engr-in-Charge.

M&L for Hard core broken granite stone boulders of gauge exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.

M&L for 100 mm thick PCC 1:4:8 Type D2 (40 mm graded granite aggregate) as in sub base of floors and pavings etc complete all as specified and directed Engr-in-Charge

M&L for 25mm thick PCC 1:2:4, type B-0 using 12.5mm graded crushed granite stone aggregate as in sub base/ levelling course for laying of screed bed complete all as specified by Engr-in-Charge.

M&L Machine cut pre polished Kota stone slab unifrom colour flooring 20-25 mm thick over 20mm thick cement screed bed or bedding layer in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6 Type C2 (40 mm graded granite stone aggregate) in foundations, filling, pillers, posts, boundary pillers etc complete all as specified and directed by Engr-in-Charge.

M&L for use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, well wall, sides and soffits of foundation and plinth beams and similar work: vertical or to batter complete all as specified and directed by Engr in Charge.

M&L for rendering 15 mm thick rendering in cement mortar 1:4 on fair faces of brick walls or on concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for two coats cement base paint on newly plastered surfaces of wall including preparation of surfaces including curing before and after applying each coat complete all as specified and directed.

M&L for Steel work in tubular trusses purlins, rafter, vertical posts, crane gantries, rails and fastenings and heavy brackets framing including special shaped washer, plates, angles etc complete using ERW or induction butt welded tubes, or reviting confrming IS 1161 -1979 grade St 240 complete all as specified and directed by Engr in charge

M&L for framed work with angles, plates, flat, and any other section confirming to Fe 290 gde E 165 incuding cutting and welding or reviting complete all as specified and directed by Engr in charge

M&L for MS wind ties for roof including securing bolts, posts &struts for fencing including cutting tops to shape as directed, including all necessary drilling, bolting or reviting etc and similar work confirming to Fe-290, Gde E-165 complete all as specified and directed by Engr-in-Charge.

S&F for prepainted galvalume aluminum zinc chrome coating corrugated sheet of 0.50 mm thick of and colour having tensile strength 550 Mpa as in roof covering/clading to wall fixed with self tapping screws as specified or as per manufacture instruction complete all as specified and directed by Engr in charge

S&F for prepainted galvalume aluminum zinc chrome coating plain sheet of 0.50 mm thick of and colour having tensile strength 550 Mpa as in roof covering/clading to wall fixed with self tapping screws as specified or as per manufacture instruction complete all as specified and directed by Engr in charge

M&L for two coats of synthetic enamel paint over a coat of red oxide primer and surfaces of any description incuding preparation complete all as specified and directed by Engr in charge

Surface dressing not exc 15 cm deep soft/loose soil and site clearance complete all as specified and directed by Engr-in-Charge.

M&L for sand filling or spreading and levelling in as in cushning/bedding for interlock tiles or cables etc complete all as specified and directed by Engr-in-Charge.

S&F for Interlocking tiles 60 mm thick of grade M-35 hydrolically pressed pre-PU paint coated in any shape and size confirming to IS 15658-2006 and laying as required pattern complete all as specified and directed by Engr-in-Charge.

S&F 1.00 mm thick mild steel black plain sheet as in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or revits and fixed to wood or steel framing witn plain 40 mm lap joints with rivited or welded , including bending or turning up, mitred angles etc as required all s specified and ireced by Engr-in-Charge.

Returning filling in (soil) including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any type of soil complete all as specifed and as directed by Engineer-in-Charge.

Removal of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specifed and as directed by Engineer-in-Charge.

M&L for point wiring for one light point or fan point controlled by one bell point controlled by one bell push on independent board switch with PVC insulated copper conductor stranded cable of size 1.5 sqmm and including PVC casing/caping terminated in existing sunk CI/pressed steel terminal boxes for fixing and 1.5 sqmm PVC insulated copper wire as earth wire connected to earth wire connected to earth folly and 3.0mm thick plastic laminated sheet cover all as specified and directed by Engr-in-Charge.

All as per item No 24.00 here-in-before but 1.5 Sqmm for one 3 pin 6 amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the same board complete all as specified and directed by Engr-in-Charge.

All as per item No 24.00 here-in-before but 1.5 Sqmm for one 3 pin 6 amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on the independent board complete all as specified and directed by Engr-in-Charge.

All as per item No. 24.00 above but using cable 4.00 Sqmm size complete all as specified and directed by Engr-in-Charge.

S&F in lamp holder PVC/Poly corbonate type insulated body with back plate suitable for batten fittings as specified and directed by Engr-in-Charge.

S&F in switch piano flush type one way single pole 5/6 Amp 240 volts complete all as specified and directed by Engr-inCharge.

S&F in switch socket combination 2 in 1, 5 pin, 5/6 Amps flush type universal complete all as specified and directed by Engr-in-Charge.

S&F in switch socket combination outlet 2 in 1, 5 pin, 15 Amps flush type universal complete all as specified and directed by Engr-in-Charge.

S&F in ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and directed by Engr-in-charge.

Supply and fixing for MCB SPN 40 Amps, 'C' series, 240 V, 10 KA, A/C complete all as specified and as directed by Engineer-in-Charge.Make as per PS.

Supply and fixing for MCB SP 6 to 32 Amps, 'C' series, 240 V, 10 KA, A/C complete all as specified and as directed by Engineer-in-Charge.Make as per PS.

Supply and fixing of exhaust fan, PVC body, AC single phase 230 volts of size 250 mm sweep with blades and frame and louvers complete all as specified and as directed by Engr-in-Charge.

Material and labour for earthing complete with galvanised steel earth plate 600 x 600 x 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level connected to and including GI wire of size 4 mm dia by means of nuts, bolts, washers etc made of and connected to test point and earth dolly as all shown in electrical plate No.3 of SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.0 kg/Sqm) with cast iron frame, funnel, with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore light grade GI protection pipe, test point, etc, t complete all as specified and as directed. Note: (i) Item includes the cost of 7.5 m GI pipe for protection of earth lead. Any additional length shall be adjusted through deviation order. (ii) Item includes the cost of 7.5 m GI earth lead. Any additional in length shall be adjusted through deviation order ( For Main DBs ) (iii) Item includes the cost of Charcoal and commercial salt ( For Main DBs )

Sub main wiring with two run of 6.00 Sqmm (2x6 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 6.00 Sqmm (1x6sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 6 Sqmm (2x6sqmm), one run of 6 Sqmm (1x6 sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

S&F in LED lights fitting, TITANIA SLEEK NEW T5 LED TUBELIGHT) (Double side Connection), 4 feet long 1x20 watt, 220 volts, AC ultra bright LED tube light with aluminium heat sink & polycarbonate diffuser having high efficacy suited for installation in existing T5 fitting with G5 lamp holders, led driver outside decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make as per PS.

S&F in LED bulk head light fitting 1x9/10 watt 230 volt attractive wall/ceiling mounted any type with white reflactor complete with all accessories pre-wired and including connecting up with 3 core twisted flaxible copper conductor cable complete all as directed. Make as per PS.

S&F sheet metal enclosure with 20 Amps, 20 V socket plug top and MCBs single pole and neutral enclosure with two pin earth plug and socket with one single pole 20 Amps MCB complete all as specified and directed by Engr-in-Charge.

S&F PVC flexible copper multistranded wire 1. 5sqmm 3 core cable for building security light complete all as specified and directed by Engr-in-Charge.

Supply and fixing connecting and testing LED security light fittings 35 watt, AC out door type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp and bracket with impact and corrossion resistant including thermal management in multiple optics coplete wit IP65/66 protection complete all as specified and as directed make as per PS.

Supply laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty 1100 volts grade with stranded aluminium conductor of size 16 Sq mm 2 core complete all as specified and as directed make as per PS.

Supply and laying of factory made, machine pressed, unreinforced precast concrete cable cover class LV type -2 flat size 300 mm x 180 mm x 40 mm complete all as specified and directed by Engr-in-Charge.

S&F and testing of fire alarm sounders/sirens electronic type horizontal single stage contineous normal operation for at least 50 minutes with sound level 65 DB to 120 DB measured at 1.5 mtr with sound output variation of + 5 DB for 1000 mtr range complete all as specified and direcred by Engr-in-Charge.

S&F GI tubing 50mm dia "light grade" with all fittings like elbow, bent, reducer, sockets, Tee etc laid in trenches, fixed on pole/under road crossing or passing through gutters etc making good of distrubed portion to match with adjacent surface complete all as directed by Engr-in-Charge.

S&F sheet metal enclosure for DBs double door when MCB's to be used single pole and neutral 240 volts 4 ways all as specified and directed by Engr-in-Charge.

S&F sheet metal enclosure for DBs double door when MCB's to be used single pole and neutral 240 volts 8 ways all as specified and directed by Engr-in-Charge.

M/S Praveen Kumar and Sons

Rampal Singh Contractor

N K BUILDERS

SATISH KUMAR AND SONS