GE/863/EWS-T-11 OF 2024-25

Amount

Demolition of cement Concrete as in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for 25 mm thick Cement concrete type B0, 1:2:4 (using 12.50 mm graded granite stone aggregate) in sub base of flooring/ hard standing /footpath complete all as specified and directed.

M & L for Coloured Glazed ceramic tiles 300 x 200 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and directed.

S&F White non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors over and including 15 mm thick screed bed in CM 1:4 as in floor etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and directed.

Machine cut kota stone slab as in flooring of size 550mmx550mm and 20-25mm thick over and incl 20mm thick cement screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 75mm thick cement concrete (1:3:6) type C1 (using 20 mm well graded stone aggregate) as in plinth protection, finishing cement concrete surfaces fair and even without using extra cement, laid in alternate panels, including forming joints at 2 mtr intervals and filled with bitumen mastics, complete all as specified and directed.

Taking down cement plastering at any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on on fair faces of brick work or concrete surface even and smooth using water proofing compound (WPC) & without using extra cement all as specified and as directed by Engr-in-charge.

M&L for rendering 10 mm thick in CM 1:4 on on fair faces of brick work or concrete surface even and smooth using water proofing compound (WPC) & without using extra cement all as specified and as directed by Engr-in-charge.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of surfaces of new plaster surface of wall and applying two coat of cement base paint complete all as specified and directed.

M & L for preparation of surfaces of new plaster surface of wall and applying two coats of oil emulsion distemper over a coat of chalk whiting , on plastered surfaces, preparatory to distempering complete all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings complete all as specified and directed.

S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L type of J type or cranked hook bolts in roof walls etc with grade of zinc coating 120 gm per sqm complete all as specified and directed.

S&F 0.63 mm thick plain galvanised black mild steel sheeting in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 120 gm per sqm complete all as specified and directed.

M&L for two coats synthetic enamelled paint over one coat of red oxide primer incl preparation of old surface of steel of any description over 10cm width or girth complete all as specifed and as directed.

M&L for applying two coats synthetic enamelled paint over one coat of red oxide primer incl preparation of new surface of steel of any description over 10cm width or girth using modrant solution to degalvanize the galvanised surfaces complete all as specifed and as directed.

S & F 20 mm dia, Aluminium alloy anodised curtain rails with brackets fixed in repair complete all as specifed and as directed

S and F Hat and coat hooks, solid body brass, 175mm to 250 mm complete all as specifed and as directed

Taking down Chowkhats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhat or frames exc 1.5 sqm but n. exc 4 sqm each (w/o taking of shutters from the frame ) complete all as specified and directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S & F 35 mm thick second class hard wood, plain framed , panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fixed to chowkhats complete all as specified and directed.

S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed.

S and F Steel windows for industrial buildings, fixed type, with glazing bars complete all as specified and directed.

M&L for applying two coats synthetic enamelled paint over one coat of red oxide primer incl preparation of new surface of steel of any description over 10cm width or girth, complete all as specifed and as directed.

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer. complete all as specified and directed.

S and F Mild steel barrel tower bolts, 150 mm long stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S and F Mild steel barrel tower bolts, 75 mm long stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S & F of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of vover plate 140 mm complete all as specified and directed.

S and F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and fixed complete all as specified and directed.

S and F 75 mm long MS Butt hinges medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S & F 75 mm long Extruded Aluminium alloy handles, fabricated type, anodised in repairs complete all as specified and directed.

S and F 125 mm long MS Butt hinges medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S & F 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S and F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S & F Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads. complete all as specified and directed.

S&F 3mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specifed and as directed

S&F 5.5mm Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specifed and as directed

M&L for preparation of surfaces of Old plaster surface of wall and applying two coat of cement base paint complete all as specified and directed.

M & L for preparation of surfaces of Old plaster surface of wall and applying one coats of oil emulsion distemper over a coat of chalk whiting , on plastered surfaces, preparatory to distempering complete all as specified and directed by Engr-in-Charge.

M & L for providing cement concrete type C1 (1:3:6), using 20mm well graded stone aggregate as in hold fast blocks, including form work ,complete, all as specified and directed.

M & L for Preparation surface of wood and wood based material, treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each complete all as specified and directed.

M & L For , treating small articles such as stop, covers, gully gratings, holdfasts, etc., area n exc 0.1 sq. m each, complete all as specified and directed.

Supply and fixing mild steel works in bands, straps, supports, stays, bolts, hooks, hold fasts etc, similar articles conforming to Fe-290.Gde-E-165, complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, holder, bell push, ding-dong etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M & L for point wiring using approved colour coding as per IS by using FRLS PVC insulated 1.5 Sqmm multistranded,1100 volt grade copper conductor cable unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for continous earthing in & incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of suitable gang box for fixing switches, sockets, regularors, etc. for one light/fan/bell point controlled by one switch complete all as specified and directed.

All as per item No 49 here-in-before but for one multipin socket outlet 5 Amp on the independent board, complete all as specified and directed.

All as per item No 49 here-in-before but for one multipin socket outlet 5 Amp on the same board with other switches, complete all as specified and directed.

All as per item No 49 here-in-before but with 2.5 sqmm copper cable for one multipin socket outlet 15 Amp, on independent board, complete all as specified and directed.

S & F switch piano type 5 Amp, 230 Volt, flush type single pole one way complete all as specified and directed.

S & F socket outlet multipin 5 Amp 230 Volt flush type complete all as specified and directed.

S & F switch piano type 15 Amp, 230 Volt, flush type single pole one way complete all as specified and directed.

S & F socket outlet multi pin 15 Amp 230 Volt flush type complete all as specified and directed.

S& F Ceiling rose, 3 terminal, PVC isolated body complete all as specified and directed

S& F Lamp holder, PVC/Polycarbonate type with back plate suitable for Angle/batten fittings complete all as specified and directed

S & F Bell push flush type 5/6 Amps complete all as specified and directed

S & F ding dong bell type AC 230 volt complete all as specified and directed.

S & F LED light fitting 20W, 220 volt AC, having colour temperature daylight (6500K), Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED light fitting 1x10W/1X12W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F 9 watt Cool day white LED B22 base , AC, 240Volt, complete all as specified and directed.

S & F in replacement of sheet metal enclosure double door distribution board single pole and neutral, 8 way 240 volt with 200 amps rated bus bar complete with bus and neutral link complete all as specified and directed.

S & F in replacement of MCB 6 to 32 amp rating 240V, 10KA 'C' curve, Single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

All as per item No 65 here-in-before but of SPN and capacity 32 Amps, complete all as specified and directed.

S&F Service cable 16 Sqmm with PVC insulated aluminium conductor, 1100 volts grade heavy duty, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular incl taking down the old existing U/S wire complete all as specified and directed.

M & L in replacement for Earthing complete with galvanised earth plate electrode of size 600x600x6 mm thick burried directly in ground earth pit not less than 2.25 m below ground level connected to 4 mm dia GI earth wire as earth lead by means of bolts,nuts,washers of Gl all as shown in electrical plate No 3 of SSR part I connected to earth test point including earth work excavation in any type of soil PCC (1:3:6) type C1 bed and chamber RCC (1:2:4) type B1 cover 40mm thick including 6 mm dia reinforcement and funnel watering pipe etc all as specified and directed. Note: On testing after completion if the desired resistance is not obtained the earthing shall be re-done at no extra cost.

Schedule of Credit

M/S Shamsher Negi Dewa

R B TRADERS

M/S SHIV NATH ENTERPRISES

M/S Gulab Singh

H S ENTERPRISE

chankaya solutions

Kusan Enterprises