Extension control room cable duct yard boundary wall gravel filling Arumuganeri 110KV SS

Amount

In hard stiff clay stiff black cotton hard red earth shales murram gravel stoney earth earth mixed with small size boulders and hard gravelly soil with initial lead of 10m and lift of 2m.

In soft disintegrated rock,laterite not requiring blasting.

Providing antitermite treatement in 4 stages (I). immediately after earthwork excavation and before laying foundation concrete. (ii). after refilling for sides of foundation. (iii). Before laying of flooring concrete and (iv). outside of basement upto 1m alround the building using termit 250ml for 5 litres of water.

Supplying and filling of quarry dust including watering, consolidation, cost of quarry dust, lead, lift etc., complete.

PCC 1:4:8 mix using 40mm HBG machine crushed metal for foundation with out form work including cost of all labour materials, lead, lift, curing etc., complete. Sulpha resistance cement to be used

RR masonry in CM 1:6 mix using HBG stone for foundation and basement including cost of all labour materials, lead, lift, curing etc., complete. Sulpha resistance cement to be used

RCC 1:1.5:3 mix using 12mm to 20mm HBS metal (machine crushed) for raft including all cost labour materials, lead, lift etc., complete but excluding cost of steel reinforcement (By using mixer machine and vibrator) Sulpha resistance cement to be used

RCC 1:1.5:3 mix using 12mm to 20mm HBS metal (machine crushed) for column, slabs with formwork including all cost labour, materials, lead, lift etc., complete but excluding cost of steel reinforcement (By using mixer machine and vibrator) Sulpha resistance cement to be used

Brickwork in CM 1:5 mix using IInd class chamber burnt brick of size 9"x 4 1/4"x 2 3/4" including cost of all materials labour, lead, lift, curing etc., complete. Sulpha resistance cement to be used

RCC 1:1.5:3 mix using 12mm to 20mm HBS metal (machine crushed) for sunshade 60cm projection 80mm thick at wall end and 50mm thick at free end and loft slab with formwork including all cost labour, materials, lead, lift, curing etc., complete but excluding cost of steel reinforcement (By using mixer machine and vibrator) Sulpha resistance cement to be used

Flooring with PCC 1:5:10 mix using 40mm HBS machine crushed metal for flooring including cost of materials lead lift labour curing etc complete. Sulpha resistance cement to be used

RCC 1:1.5:3 mix using 12mm to 20mm HBS metal (machine crushed) for roof slab concrete with formwork including all cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement Sulpha resistance cement to be used (By using mixer machine and vibrator) 100 mm thick

Plastering with CM 1:3, mix 20mm thick over the flooring with smooth finish and thread lined immediately after laying flooring concrete including all cost labour materials lead lift curing etc complete.

Plastering with CM 1:5, mix 12mm thick for inside and outside walls including all cost labour materials lead lift etc complete.

Plastering with CM 1:3, mix 12mm thick for ceiling including all cost labour materials lead lift labour curing etc complete.

Supplying and fabricating and placing in position MS/RTS (CRS) steel reinforcement for RCC works including labour for cutting bending tying and Fixing in position as per specification including cost all materials, lead, lift, cost of binding wire etc., complete.

Manufacturing and supplying of steel door using 40x40x6mm for outer frame 25x25x6mm for shutter frame with MS flat 25x6mm 3nos and for panels with 18swg MS sheet with bolts, washers, hinges 12mm dia tower bolt of 200x38x2.40mm at top and 150x38x2.4mm at bottom and one no 250x16mm aldrop etc complete as per standard drawing and specn as well as as per the direction of Engineer at site. Steel door of size 1.00 x 2.20m. (Single leaf)

Supplying and fixing of steel ventilators of size 0.75x0.45m fully glazed louver type as per standard specification with MS angle 35x35x5mm for frame and glass 4mm thick including providing 12mm dia bar including cost of all materials lead lift etc complete as per standard drawing and specn as well as as per the direction of Engineer at site. Ventilator of size 0.75x0.45m.

Providing PVC downfall pipe using 110mm dia 4KSC PVC pipe and PVC clamp line supreme etc including fixing SWR washer type door bend and shoe in correct postion and connecting from the roof slab including cost of all materials labour transport lead lift etc complete including SWR accesries and washers.

Flooring with approved Vertified tiles over cement mortor 1:3 12mm thick including pointing with white cement finishing the joints flush pointing the surface etc complete.

Dadooing with glazed tiles of best quality of approved make Johnson Neycer etc over 1:3 12mm thick plastering including cost of all materials labour lead lift etc complete.

Providing and fixing sanitary fittings consisting of Neycer/ Parry ware of water closet single 60cm with P or S trap connecting with PVC ventilating shaft and Y bend complete including cost of all materials lead lift etc complete.

Supplying and fixing 100x50mm PVC floor trap in bath room with one PVC door bend , shoe of 50mm dia including cost of all materials lead lift etc complete

Supplying, laying and fixing in position of PVC pipe of best quality including cutting threading joining with necessary PVC specials including cost of all materials lead lift labour etc complete. 32mm dia pipe.

Supplying ,laying and fixing in position of PVC pipe of best quality including cutting threading joining with necessary PVC specials including cost of all materials lead lift labour etc complete. 25mm dia pipe

Supplying and fixing in position of gun metal gate valve leader make of best quality including cost of materials lead lift labour etc complete. 32mm dia

Supplying and fixing in position of gun metal gate valve leader make of best quality including cost of materials lead lift labour etc complete. 25mm dia

Supplying, cutting, fabricating and fixing the 100x50x6mm MS chennel to the required size for cable duct including the cost of materials, labour, lead etc., complete.,

Wiring with 2 x 1.50 sqmm PVC unsheathed SC copper cable of 650V grade in suitable concealed PVC rigid pipe in wall or ceiling with PVC accessories with T.W switch box in flush with wall covered with hylam sheet of 3mm thick with painting of suitable colour with continous earthwire connection of 14 SWG TC wire for light points and fan points.

Wiring with 2 x 4 sqmm PVC unsheathed SC copper cable of 650V grade in suitable concealed PVC rigid pipe in wall or ceiling with PVC accessories with 150mm x100mm x113mm T.W switch box in flush with wall covered with 3mm thick hylam sheet for 15Amp 3 pin flush type non interlocking C.S plug including pin top with painting of suitable colour with continous earthwire connection of 14 SWG TC wire for power plug points.

Supply and run of 2 of 4 sqmm PVC insulated Sc unsheathed copper conductor of 1100 V grade in suitable PVC pie concealed in wall and ceiling with continuous earth wire 14 SWG TC wire for power pulg point on wall and ceiling with reputed make switch boxes etc. complete.

Supplying and fixing of 5 amps 3 pin socket in the existing switch including 3 pin top.

Earthing as per standard specification complete in all respects with necessary masonry works.

Supplying and fixing of precast slab in RCC 1:1.5:3 mix, using 12 to 20 mm HBG metal including cost of all materials, lead, lift etc., complete.

Supplying and fixing 600x450mm mirror including all cost of materails lead lift etc complete.

Supplying and fixing of wash basin of size 500x400mm of approved quality Neycer/ Parry ware including cost of wash basin with pedestal cock fixing with rug bolt and nuts, 15mm dia PVC connecting hose and outlet using 40mm dia PVC waste pipe , CP valve, tap etc complete.

Supplying and fixing of 110 mm dia PVC pipe including cost of all materials, lead, lift, labour for fixing etc., complete.

Supplying and fixing of 110 mm dia PVC bend including cost of all materials, lead, lift, labour for fixing etc., complete.

Supplying and fixing of 110 mm dia PVC TEE including cost of all materials, lead, lift, labour for fixing etc., complete.

Supplying and fixing of 110 mm dia PVC pipe of 3m height with cowl for ventilation shaft including cost of all materials, lead, lift, labour for fixing etc., complete.

Supplying and fixing of approved quality of aluminium towel rod with powder coating of size 90cm and fixing the same over teak wood round block and soap tray (PVC) in bath room including cost of all materials lead lift labour etc complete

Supplying and fixing of PVC shower and Nickle control valve complete

Supplying and fixing in position of 15mm dia brass screw down bib cock of best quality including cost of materials lead lift labour etc complete.

Supply and fixing of 4'x36W single industrial type flu. fitting complete with Electronic choke and condenser with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from the terminals to the fitting with flu. tube. (SD 87)

Supply and fixing of 18 W CFL point. (SD 77)

Dismantling of PCC concrete and dispose the debris away from the site.

Dismantling of Brick/Stone Masonry wall and dispose the debris away from the site.

Dismantling wooden doors/windows including removal of frames, hinges and fastenings and stacking the same for reuse.

Repairing by removal of aluminium doors and windows shutters with 4mm thick glass using glazing clips rubber beadings and refixing the window shutter in position including cost of materials labour lead lift etc complete.

Colour washing two coats with approved Exterior emulsion over one coat of primer for outside wall including cost of all materials labour lead lift etc complete.

Colour washing two coats with water based plastic emulsion paint over one coat of primer for inside control room wall including cost of all materials labour lead lift etc complete.

White washing two coats with oil bound distember over one coat of white cement primer for ceiling & pump room inner including cost of all materials labour lead lift etc complete.

Painting two coats to the all exposed faces of steel works over one coat of primer with approved enamel paint including cost of all materials, lead, lift etc., complete.

Supplying and placing of 60 cm inner dia, 30 cm height and 5cm thick earth pit in two piece with top cover including necessary earth work excavation including cost of labour,lead ,lift, etc. complete.

Supplying fabricating and palcing in position of MS. Angle of size 65x65x6mm chain link fence post including cutting, bending and trilling the holes as directed by the site engineer including transporting units etc., Complete.

Supplying fabricating and palcing in position MS Flate of size 50 x 5mm thick for holding chain link with post and digonal brazing @ every 15m intervals including cutting, bending and trilling the holes as directed by the site engineer including transporting units etc., Complete.

Supplying and tensioning of 4mm dia GI wire fabric of 50mm square (chainlink fence) including cost of 4mm dia GI wire fabric of 25mm square (chainlink fence) labour charges for laying and tensioning cost of GI binding wire and required GI bolt and nuts etc complete.

Supplying and fixing Eye bolt including all cost of materials, paiting labour charges for fixing etc complete

Supplying and fixing of Steel gate including cost of angle, cost of two coat paint over one coat of primer paint, labour, lead, lift,transportation etc., Complete.

Supplying and filling with 20mm to 25mm metal as per standard specification inlcuding cost of all materials, labour, lead, lift, etc., complete.

SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only

V ALAGUDURAI