REPAIR REPLACEMENT OF INTERNAL WIRING COMPLETE WITH ALL ACCESSORIES OF MD AND OTM ACCN AT SAMNABANJ BATTAL RC PEAK AND DHAR ROAD UNDER GE ARMY DHAR ROAD

Amount

Taking down old unserviceable/deteriorated batten/PVC conduit point wiring aluminium/ copper from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets,bell push , ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Paris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required and directed by Engineer-in-Charge.

M & L for concealed point wiring on wall and ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 20 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.2 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for the following:- Note :-for modular point wiring metal flush box

One light /Fan/Bell point controlled by one switch 6/5 Amp one way single pole.

One 3 pin socket outlet 6/5 Amps controlled by one switch on the same board with other switches.

One 3 pin 6/5 Amp socket outlet controlled by one switch independent board.

All as per item No 2 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

Taking down old unserviceable/deteriorated point wiring aluminium/ copper (excluding PVC conduit) from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets,bell push , ceiling rose, pendants, Holders sunken box, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Paris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required and directed by Engineer-in-Charge.

M&L for drawing the wire in existing conduit steel/PVC, concealed / surface ,complete with point wiring with FR PVC insulated, unsheathed stranded copper conductor of nominal area 1.5 Sqmm, 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly in and sunken terminal boxes pressed MS/GI steel terminal boxes not less than 1.20 mm thick for mounting switch, socket etc including 3 mm thick Hylam brand sunmica laminated sheet cover with brass screw and cup washers with all accessories and making good to disturbed surface with cement mortar ratio of 1:3 and matching surface with existing white/colour wash, oil bound or cement base paint etc to match with existing surface complete all as specified and directed and suitable for the following: -

one light, fan, call bell point controlled by one switch

-Ditto- all as per item No 5 here-in-before but For one socket point 6 Amps controlled by one switch on same board

-Ditto- all as per item No 5 here-in-before but for 5 Amp independent socket point controlled by one switch

All as per item No 5 here-in-before but in exsiting concealed/surface PVC conduit for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 1.5 Sqmm PVC-FR insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

S&F as replacement Angle lamp /batten holder fixed on wall /ceiling all as approved and directed by Engineer-in-charge.

S&F in replacement of old bulk head fitting by exterior application IP 66 protection bulk head fitting LED 10 watt alongwith housing LED Panel/Lamp weather proof outdoor type alongwith covered with transparent clear sheet all as specified and directed Make : Crompton/Wipro/Philips etc

S&F in replacement of old sketch fitting/any type by decorative wall mounted LED lamp (white/ warm) complete all as specified and directed

S&F Wall mounted LED batten 20 Watt with 01 No LED tube rod (White/Yellow), extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver including dismantling taking down unsv FTL fitting any type complete all as specified and directed.

S&F Wall mounted LED light fitting mirror type, 10 Watt 220V decorative type White/Yellow incl integrated electronic driver and connecting up with three core flexible copper conductor including dismantling taking down unsv sketch fitting any type complete all as specified and directed.

S&F LED building security light 35 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade suitable size dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismentling taking down unsv fitting any type all as specified and directed.

Supply and fixing in replacement of Mirror optic fitting by recess/surface mounted mirror optic LED luminaire fitting with paralite P5 louvers 35/36 watt LED, 6500 K, dimention 600mm x 600mm fitting for grid type ceiling including control driver and other accessories complete all as specified and directed.

Supply & Fixing as replacement medium step type fan regulator 80 Watt, 240 Volt AC, socket size, medium step" ISI marked complete all as specified and directed.

S&F as replacement Ding dong sound door call bell electric AC 240 volt, 50 Hz ding dong type including taking down unserviceable complete all as specified and as directed.

S&F as replacement ceiling rose, surface bakelite, 65mm x 50mm, two to three terminals complete all as specified and as directed.

S&F as replacement switch piano flush type (ISI marked), single pole, one way 6 Amp, 240 Volts complete all as specified and as directed.

S&F as replacement switch piano flush type (ISI marked), single pole, one way 16/15 Amps, 240 Volts including complete all as specified and as directed.

S&F as replacement socket outlet 3 pin, 6 Amp piano flush type including complete all as specified and as directed.

S&F as replacement socket outlet, 2 in 1, 3/5 pin 6 / 16 Amp, piano flush type complete all as specified and as directed

S&F as replacement bell push 5/6 Amps SP flush type complete all as specified and as directed.

M&L as replacement for modular fan regulator stepped type with frame plate flush type for 2 modules complete all as specified & directed

M&L as replacement for modular snap switch,single pole,one way,6 Amp suitable for 1 module complete all as specified & directed

M&L as replacement for modular snap switch,single pole,one way,16 Amp suitable for 1 module complete all as specified & directed

M&L as replacement for modular bell push,single pole,one way,6 Amp suitable for 1 module complete all as specified & directed

M&L as replacement for modular snap Socket outlet,5pin,6 Amp flush type suitable for 2 Module complete all as specified & directed

M&L as replacement for modular snap Socket outlet, 2 in 1 pin,6/16 Amp flush type suitable for 2 Module complete all as specified & directed

M&L as replacement for modular white cover plate with frame for 1 module complete all as specified & directed

M&L for modular white cover plate with frame for 2 module complete all as specified & directed

M&L as replacement for modular white cover plate with frame for 3 module complete all as specified & directed

M&L for modular white cover plate with frame for 4 module complete all as specified & directed

M&L as replacement for modular white cover plate with frame for 6 module complete all as specified & directed

M&L for modular white cover plate with frame for 8 module complete all as specified & directed

M&L as replacement for modular white cover plate with frame for 12 module complete all as specified & directed

M&L for modular white flush box for 1/2 module complete all as specified & directed

M&L as replacement for modular white flush box for 3 module complete all as specified & directed

M&L as replacement for modular white flush box for 4 module complete all as specified & directed

M&L as replacement for modular white flush box for 6/8 module complete all as specified & directed

M&L as replacement for modular white flush box for 12 module complete all as specified & directed

M & L for sub main wiring in replacement of worn out aluminium conductor wire with two run of FR PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 6.0 Sqmm, 1100 Volts grade and one run of 4.00 Sqmm FR PVC insulated unsheathed as earth (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS 694 with latest amendments and drawing in PVC rigid conduit , connecting incoming / outgoing electric connections by using required size copper lugs / thimbles and making good the disturbed surface to match with existing complete in all respect all as specified and directed. Note :- 1. Two run of single core cable with one run of contineous earth wire of copper conductor wire Flexible (Multistrand) of FR PVC insulated shall be measured and paid as one unit length. 2. PVC conduit pipe with fitting shall be measured and paid separately .

M & L for sub main wiring in replacement of worn out aluminium conductor wire with two run of FR PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 4.0 Sqmm, 1100 Volts grade and one run of 2.5 Sqmm FR PVC insulated unsheathed as earth (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS 694 with latest amendments and including draw in PVC rigid conduit 25 mm dia , connecting incoming / outgoing electric connections by using required size copper lugs / thimbles and making good the disturbed surface to match with existing colour (distumber, Oil bound, Samosem etc ) complete in all respect all as specified and directed. Note :- 1. Two run of single core cable with one run of contineous earth wire of copper conductor wire flexible (Multistrand) of FR PVC insulated shall be measured and paid as one unit length 2. PVC conduit pipe with fitting shall be measured and paid separately .

Supplied and fixing in replacement PVC conduit by Non Metallic Rigid PVC conduit, ISI Marked, conforming to IS 9537, medium grade of size 25 mm dia including all fittings like bends, elbow reducer, junction boxes, tee bell mouth all fixing accessories such as coupler lock, nuts, saddles pipe hooks etc complete including Cutting & Chasing required on brick wall not exceeding 10 CM girth for concealed conduit wiring and making good to disturbed surface with cement mortar 1:3 and distemper / colour wash etc to match with existing surfaces including facing / finishing complete all as specified and directed.

S & F service connection with twin core 10 Sqmm 240 volt heavy duty un armured PVC insulated solid aluminium conductor cable served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended in replacement of old unseriveable conductor cable complete.

S & F service connection with twin core 6 Sqmm 240 volt heavy duty un armured PVC insulated solid aluminium conductor cable served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended in replacement of old unseriveable conductor cable complete.

Supply and fixing as in repair Metal clad socket outlet with single pole and nuetral enclosure with two pin and earth plug socket complete with one single pole MCB 20 Amps complete all as specified and directed by EIC.

Supply & Fixing in replacement of DB by SPN Distribution Box, double door of protection grade IP 42 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 4 way complete all as specified and directed.

Supply & Fixing in replacement of DB by SPN Distribution Box, double door of protection grade IP 42 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way complete all as specified and directed.

Supply & Fixing in replacement of DB by SPN Distribution Box, double door of protection grade IP 42 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 12 way complete all as specified and directed.

Supply & Fixing in replacement of DB by TPN Distribution Box 8 way double door of protection grade IP 42 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of way, confirming to IS 13032 & 8623 including chasing/cutting of wall and concealed and making good as existing surface complete all as specified and directed.

Supply & Fixing in replacement of DB by VTPN Distribution Box with 100 Amp MCCB double door of protection grade IP 42 fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of way, confirming to IS 13032 & 8623 including chasing/cutting of wall and concealed and making good as existing surface complete all as specified and directed.

Supply & Fixing as replacement MCB SPN, 5 to 40 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed.

Supply & Fixing as replacement MCB SP, 06 to 40 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked complete all as specified and directed.

Supply only MCB TPN, 63 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and complete all as specified and directed.

Supply and fix as in replacemtn of 3 Pin Plug Top 16A, White/Black 240V|3 Pin Top complete all as spd and directed.

Supply and Fix LED lamp 10 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismentling taking out unsv CFL/LED Bulb. Make - Philips/Bajaj/Havells

Supply and Fix LED lamp 15 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismentling taking out unsv CFL/LED Bulb.

Supply and Fix LED lamp 20 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismentling taking out unsv CFL/LED Bulb.

Taking out old unsv electric meter and deposit to E/M store and S&F for enrgy meter electronic type temper proof LCD display with polycarbonate cover 230V, 10 - 60 Amps accuracy class - I 50Hz,,confirming to IS 13779,IP-54,with parameters to show data,time,current reading,load,PF,voltage and KWH single phase all as specified and direcetd by Engr-in-Charge

Taking out old unsv electric meter and deposit to E/M store and S&F for enrgy meter electronic type temper proof LCD display with polycarbonate cover 415V, 10 - 60 Amps accuracy class - I 50Hz,,confirming to IS 13779,IP-54,with parameters to show data,time,current reading,load,PF,voltage and KWH three phase all as specified and direcetd by Engr-in-Charge

S&F Exhaust fan AC single phase 230 volts for size 300 mm sweep, including fixing arrangement including nut, bolts, washer etc, with necessary eletric connection with suitable copper wire from ceiling rose complete all as spd and directed inluding removing and dismentaling of old UNSV ex fan any type and size and deposited it in MES Store yard or as directed by EIC.

S&F Ceiling Fan AC single phase 230 volts for size 1200 mm sweep, including fixing arrangement including nut, bolts, washer etc, with necessary eletric connection with suitable copper wire from ceiling rose complete all as spd and directed. inluding removing and dismentaling of old UNSV fan any type and size and deposited it in MES Store yard or as directed by EIC.

Supply & fix Electric Storage water heater of capacity 25 Ltr , 230 V energy efficient complete all as specified and directed by Engineer-in-charge.

S&F Exhaust fan AC single phase 230 volts for size 250 mm sweep plastic body along with louvers, including fixing arrangement including nut, bolts, washer etc, with necessary eletric connection with suitable copper wire from ceiling rose complete all as spd and directed. inluding removing and dismentaling of old UNSV ex fan any type and size and deposited it in MES Store yard or as directed by EIC.

M&L for earthing as per IS:3043 with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately).

Supply and fix as in repair of Exhaust Fan iron louver for size 300 mm dia exhaust fan of shape (round/square) as directed by EIC.

S&F Downlight/deep light 3 watts round shape in different colour (white/warm/yellow /red/green) complete all as specified and directed

S&F Downlight/deep light 5/7 watts round shape in different colour (white/warm/yellow /red/green) complete all as specified and directed

S&F Downlight/deep light 9 watts round shape in different colour (white/warm/yellow /red/green) complete all as specified and directed

S&F laminated bakalite sheet of following size

Supply and fixing insulation tape 25mm width and 25 mtr length

M&L switch socket combination 2 in 1 3 pin 5/15 amp flush type universal complete all as specified

M&L switch socket combination 2 in 1 3 pin 5 amp flush type universal complete all as specified

Supply and fix as in replacemtn of 3 Pin Plug Top 6A, White/Black 240V|3 Pin Top complete all as spd and directed.

S&F Post top energy saving , environmental friendly, aesthetically designed with indirect symmetrical light distribution die-cast aluminium IP-65 luminaire with high power COB LED as light source of capacity 35/40 Watt, 6500K incl dismantling and taking down unsv fitting any type all as specified and directed.

Deduct Schedule of Credit of Rs. (-) 90278.50 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

M/SHansrajbuilder (BID ID -3478103)

DAVINDER SINGH (BID ID -3484154)

K S BUILDERS (BID ID -3478187)