Repairing of 5400M.T. Capacity PCF Godown and Boundary wall at TediBagia Distt.Agra

Repairing of 5400 M.T. Capacity PCF Godown and Boundry wall at Tedi Bagia Distt. Agra

Dismentling of corrugated A.C Sheet including stacking of dismentled materials as directed by Engineer Incharge with in a distance of 60 metres.

Supply & Fixing 6 mm thick gray corrugated A.C. Sheet roofing in position including supply of all materials, labour& T and P etc. required for proper completion of the work.

Supply and fixing of 0.63 mm thick 1.0mm wide G.I. plain sheet in shape of ridge over A.C sheet roofing and also supply and fixing of 40x5mm flat iron as wind tie over G.I. ridge including drilling of holes, welding, cutting rebetting etc. required for proper completion of the work.

M.S .Steel or iron work of heavy sizes and section such as trusses door frames and wind ties etc. wrought to required form including drilling holes riveting and welding where necessary and also including supply of steel bolts nuts wastage etc. and their fixing required for proper completion of work including providing one coat of steel prime work ties of 40x6mm. flat.

Supply & laying one layer of Tarfelt S.T.P grade III of the junction of wall & roof as per direction of E/I including necessary overlap, given a coat of approved Mastic paint/bitumin 85/25 below the Tarfelt& including supply of all materials, labour T&P etc. required for proper completion of work.

Repairing of rolling shutters including repair of side guides and arrangement of inside and out side with pull & push operation and oiling and greasing including supply of all materials, labour& T.P. etc. required for proper completion of the work.

Supply and fixing of rolling shutters of approved make of 80x125 mm (3"x18gauge) cold rolled M.S lath inter locked through their entire length joined together at the end by lock & mounted on specially disigned pipe shafts with brackets, side guiders & arrangement are inside and outside locking with push & pull operation complete but excluding the cost of top cover & spring .

Repairing of godown truss pipe & purlins and other steel work weldingincluding supply of all materials, labour, T&P etc. required for proper completion of work

Making golai in gable and wal parapet of Godowns 4-1/22" (12 cm) thick and 2" (5cm) projected including supply of all materials, labour, T&P etc. required for proper completion of work.

Providing & Applying leak proof compound over j hooks including supply of all materials, labour T&P etc. required for proper completion of work

Clearing jungle including uprooting of vegitation grass brush and trees and suplings girth up to 30 cm. measured at a height of 1 meter above ground level and removal of rubbish including minor surface excaration dressing of ground up to 30 cm. for the compus site.

Dismantlingof existing plaster including disposal of refuse material as directed by E./I with in a distance of 60 m.

Dismantling brick workcement, mortar including stacking of material as directed by E./I with in a distance of 60 m.

Excavation in foundation of ordinary soil (Loam clay or sand) including lift up to 1.5 M. and lead up to 30M. and including filling watering and ramming of excavated earth into the trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge up to a distance of 30 M from the foundation trenches.

Concrete with 4Cm. Gauge over burnt brick ballast with fine sand and cement in proportion of 10:5:1 in foundation including supply of all materials, labour, T&P etc. required for proper completion of work.

First class brick work in 1:6 cement and coarse sand of 2.20 fineness modulus mortar in foundation and plinth including supply of all materials, labour, T&P etc. required for proper completion of work.

40 mm thick cement, concrete flooring 1:2:4 (1 cement, 2 coarse sand, 4 graded stone aggregate of 20 mm nominal size) laid in one layer finished with floating coat of neat cement including supply of all materials, labour, T&P etc. required for proper completion of work.

Dismentelling cement concrete floors inlcuding stacking of dismenteled material as directed by E./I with in a distance of 60 m.

First class brick work in 1:6 cement and coarse sand of 2.20 fineness modulus mortar in S/S including supply of all materials, labour, T&P etc. required for proper completion of work.

R.C.C work with cement, approved coarse sand and 2 cm. gauge approved stone ballast in the proportion 1:1.5:3 excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G. binding wire and including necessary centering and shuttering etc. and including supply of all materials, labour, T&P etc. required for proper completion of work. (Binding wire to be supplied by contractor free of cost.)

Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in overall rate) wrought to required shape as necessary including bending for proper completion of work including supply of steel and its wastage bend. Hook & authorized overlapping shall be measured up to floor two level.

12 mm. thick plaster in 1:4 cement and coarse sand in (2.20 F.M) mortarincluding supply of all materials, labour, T&P etc. required for proper completion of work.

Finishing walls with two coat of waterproof cement paint of approved make such as super snowcem, durocem, robiacem, gutlucem quality on previously old treated surface to give an even shade after throughly brushing to remove all durt and remains of loose powdered materials including curing and cost of all all materials labour T&P etc. required for proper completion of the work.

Painting two coats on steel and other metal surface upto 10 cm width are grith not exceeding 0.10 sqm. in area with superior synthetic Enamal paint such as Luxol 3, higloss,apcolite,superlac deluxe specified brusing to give an even shade & including the cleaning the surface of all dust, durt and other foreign matter sand papering and stopping including cost of all materials labour T&P etc. required for proper completion of the work.

Repairing &refixing of main gate with welding including dismentling of hold fast & repairing of columns and gates where necessary as per direction of E./I. required for proper completion of the work.

Supply and fixing of Hand Pump India marka-2 including supply of all material: labour and T&P etc. required for proper completion of the work.

Deduction for old bricks(-)

TOTAL (Sr. No. 1 to 1.30)

ADD:-GST @ 18%