Karnataka

AOC

Works

Buildings

CONSTRUCTION OF ARMORY BUILDING AT BIDAR

Karnataka State Police Housing and Infrastructure Development Corporation Limited

KSPHIDCL Contracts Section Bengaluru | Bengaluru Urban, Karnataka

Amount: ₹42.3 LCloses: 26 Mar 2026Closed

Timeline

Published11 Mar 2026
Closed26 Mar 2026
Awarded—

Bids

1 Bid26 Mar 2026

#	Company	Amount	Status
1	SHARNAPPA MALLLIKARJUN PANCHAKSHARI ₹44.4 Laccepted-aoc	₹44.4 L	accepted-aoc

Tender Value

₹42.3 L

EMD Value

₹85,000

Closing Date

26 Mar 2026, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Karnataka State Police Housing and Infrastructure Development Corporation Limited

Contact Person

Anil Kumar S

Mobile Number

Work Description

CONSTRUCTION OF ARMORY BUILDING AT BIDAR

Tender Information

Tender ID

KSPHIDCL/2025-26/BD/WORK_INDENT368

Reference Number

KSPHIDCL/2025-26/BD/WORK_INDENT368

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

KSPHIDCL Contracts Section Bengaluru

Source Website

Subscribe to view

Documents Required

14 documents required · 14 mandatory

Technical Bid

RequiredKSPH & IDCL Registration Certificate

RequiredClass-III & above Civil registered contractor of State PWDs / Central/MES/Govt. Undertakings

RequiredIncome Tax returns & PAN

RequiredEPF Registration Certificate

RequiredWork Done Certificate - ITT 3.2 b Similar nature Work done certificate

RequiredLiquid assets and availability of credit facilities

RequiredTurnover Certificate - ITT 3.2 a

Required1.3.of Section-3 Qualification Information

Required1.4.of Section-3 Qualification Information

Required1.6.of Section-3 Qualification Information

RequiredGST Registration Certificate

RequiredExecuted minimum quantities of work - ITT 3.2 c

RequiredWork Done Certificate - ITT 3.2 d Electrical Work done certificate

RequiredNon Refundable Transaction fee of Rs.20,000/- in the form of DD in favour of KSPH & IDCL Own Fund, Bengaluru

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidder shall pay Contract Management Module processing fees of 0.025% of the contract value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The tender document is part and parcel of the agreement

The intending bidders are requested to note that they should abide by the detailed instructions and conditions contained in the Tender documents and further modifications done if any

The bidder shall study the Tender document Carefully and quote the rates

Drawings uploaded are only for Tender Purpose only

The bidder shall give an undertaking that they would abide by the provisions of employees provident fund and shall remit PF of labourers to the respective PF offices or else KSPH & IDCL have the right to deduct the work bills and remit the same to respective PF offices

The contractor shall quote his rates inclusive of PF as per the applicable rate as issued by the PF department from time to time and if any variation occurs it shall be paid / refunded by / to the Corporation against documentary evidence

The successful bidder shall give an under taking that they would abide by the provisions of the Employees Provident Fund Act

Remittance towards PF shall be commensurate with the labour component of the work involved

The Bidder shall remit PF of labourers to Bidders permanent PF code number only

The bidder should maintain register of labourers deployed and wages paid for the workers and shall produce the documents whenever called for by the competent authority. Remittance towards PF shall be commensurate with the labour component of the work involved

The contractor shall obtain insurance coverage for all the workers deployed for this work

Corrigendum/modification/corrections, if any, will be published in the karnataka public procurement portal and www.ksphc.org web sites only

Tender amount of Rs.4229955.48 is inclusive of all applicable taxes, levies, duties and cess, Building Workers Welfare Cess etc., excluding GST

The rates quoted by the Contractor shall be deemed to be inclusive of all applicable taxes, levies, duties and cess, Building Workers Welfare Cess etc., excluding GST as applicable as per the latest Notifications of GoK and GoI prevailing as on the date of NIT. The Employer will perform such duties in regard to the deduction of such taxes at source as per applicable law. GST shall be paid to the tendered amount separately. The Contractor should submit the tax invoice along with RA Bills

The bidder should furnish the documents relating to registration of GST

The bidder should furnish the valid address, phone number & e mail ID

The intended bidder shall visit the site & quote his offer accordingly and for having visited the site, they should upload the photos while submitting the tender

Bounded scanned hard copies are to be submitted duly marking the Page Nos. within 3 days after the last date of submission of the bid documents online to EE(Contracts), KSPH & IDCL, Bangalore

Further details of the work or any clarifications can be obtained from the office of the Executive Engineer(Contracts), KSPH & IDCL, Richmond Road, Bangalore 560025. Ph: 080-25584102 Extn - 130 / 114 / 117

The Bidder has to make payment of Rs. 20,000/- (Rupees Twenty Thousand Only) inclusive of GST as transaction Fee (Nonrefundable) in the form of DD payable to KSPH & IDCL (Own Funds), Bengaluru and the bidder has to upload the scanned copy of the DD in the Karnataka Public Procurement web portal towards transaction Fee. The original DD should be submitted to Office of the Executive Engineer (Contracts), KSPH & IDCL, No. 59, Richmond Road, Bangalore- 560 025 On or before the Last date of receipt of tender for verification and the non-compliance of the same leads to the rejection of the bid.

Technical Criteria

Past Experience

1.3 of Section-3 Qualification Information: Work performed as Prime Contractor (in the same name) on works of similar nature over during the five years (2020-21 to 2024-25)

Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer

3.2 (c) : Quantities of work executed as prime contractor (in the same name) during the last five years (2020-21 to 2024-25)

Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer

3.2- To qualify for award of this contract, each Tender in his/her/their name should have in the last five years i.e. 2020-21 to 2024-25): (b) Satisfactorily completed as prime contractor (at least 90% of the contract value), at least one similar nature of work of value not less than Rs. 21.14 Lakhs

Others -- Work Done certificate issued not below the rank of an Executive Engineer or equivalent.

ITT - 3.2 d) The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totalling Rs.1.20 Lakhs in any one year

Others -- Workdone certificate issued not below the rank of an Executive Engineer. In case of Sub Contractor licence & Consent letter also to be uploaded

3.2 (e) The Tenderer or his identified subcontractor should possess valid license for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works totaling Rs. 0.45 Lakhs in any one year

Others -- Work done certificate issued not below the rank of an Executive Engineer. In case of Sub Contractor licence & Consent letter also to be uploaded

1.4 of Section-3 Qualification Information : Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender : (A) Existing commitments and ongoing works & (B) Works for which Tenders already submitted

Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer

1.6 of Section-3: Qualification Information: Reports on the financial standing of the tenderer, such as profit and Loss statements and auditors reports for the last five years. (2020-21 to 2024-25)

Others -- Profit & Loss Statement from Registered Chartered Accountant

Capabilities of Vendor

Be a Class-III & above Civil registered contractor of State PWDs / Central/MES/ Govt. Undertakings

Others -- Valid Registration Certificate issued by respective Depts

Be Registered with KSPH & IDCL

Others -- Valid Registration Certificate issued by KSPH&IDCL

Be Registered with GST

Others -- Valid Registration Certificate issued by Competent Authority

Income Tax returns & PAN

Others -- Income Tax returns and PAN certificates

Be Registered with EPF Authorities

Others -- EPF Registration Certificate

ITT 3.3 (c)- Each Tenderer should further demonstrate Liquid assets and /or availability of credit facilities of no less than Rs.12.69 Lakhs (Credit lines/ letter of credit/ certificates from Nationalized / Scheduled banks for meeting the fund requirement etc (Unconditional)

Others -- Letter of Credit Certificates from Nationalized / Scheduled banks for meeting the fund requirement

ITT 3.2 - To qualify for award of this contract, each Tenderer / company in his / its name should have in the last five years i.e. 2020-21 to 2024-25 (c) Executed in any one year the minimum quantities of work executed (Please refer Tender Document)

Others -- Certificate issued from not below the rank of an Executive Engineer or equivalent.

Financial Status

ITT 3.2 - To qualify for award of this contract, each Tenderer in his/her/their name should have in the last five years i.e. 2020-21 to 2024-25: (a) Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.42.29 Lakhs

Others -- Attach Certificate from Registered Chartered Accountant with UDIN Number

Others

1.8 of Section-3 Qualification Information: Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are Proposed to be deployed on this contract, if awarded.

Others -- Organization Chart & Company Profile

Fee & Financial Details

Tender Fee Amount

₹1,060

EMD Fee Amount

₹85,000

Important Dates

Last Activity

26 Mar 2026

Published

11 Mar 2026

Bid Opening

30 Mar 2026

Download Ends

17 Mar 2026

BOQ Preview

•

CONSTRUCTION OF ARMORY BUILDING AT BIDAR

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

•

Cutting of Trees, excluding removal of stumps and roots of trees Morth 201a (i) Girth from 300 mm to 600 mm

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

KPWD 1.9 Filling available excavated earth (excluding rock)in sides of foundations upto plinth in layers not exceeding 20 cms. In depth,compacting each deposited layer by ramming after watering includ...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

•

Providing and laying 150 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete.

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Supply and placing the Design Mix of M-30 Grade for Self Compacting Concrete corresponding to IS 456-2000 (Re-affirmed 2021) and relevant IS codes using Batching plant, Transit mixer and concrete pump...

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggre...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...

•

Providing and fixing MS grill work for windows and ventilators using MS flats,or MS square riods, or combination of MS flats and square rods as per approved design,drawing including cutting steel sect...

•

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

•

Providing & fixing of Aluminium Formwork with accessories (Pins & wedges, kicker bolt & nuts , steel props, bracings, struts etc..,) including shuttering oil , grease,staging, supports & working platf...

•

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

•

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...

•

Electrical - Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before co...

•

Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...

•

Groove cutting in the wall Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire ...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall a...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps one way Switch

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. and as per the directions of Engineer in charge of the work. ii) 6 Amps 3 wa...

•

Supplying of ..20w...feet -Alu Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz &...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

•

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers, ,as per directions of engi...

•

Supplying and running GI/Copper strips for grounding connections, using necessary fixing materials as required., ,as per directions of engineer incharge of the work. 25x3mm Copper strip

•

Supplying and running GI/Copper strips for grounding connections, using necessary fixing materials as required., ,as per directions of engineer incharge of the work, ,as per directions of engineer inc...

•

Supplying and running of GI strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip

•

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

•

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C. 50 Hz 12/24v D.C.

•

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board 32-40 Amps 4 pole

•

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...

•

Labour charges for Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to25 sqmm ---- As per directions of ...

•

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) In soil (ordinary)

•

Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. 50mm

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. and as per the directions of Engineer in charge of the work.

•

Erection of panel and Meter Borad : Erection of combined panel borad and meter borad unit with necessary materials and labour charges Inculuding providing cement concrete foundation bed ect complete. ...

•

Supply, installation of 4kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 6.9 Kg, empty weight 2.9 Kg, Can Height 440MM, Diameter 140MM, Disch...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW2 Bid Doc WI-368.pdf

Tender Document • 1.42 MB

Make List Civil and Electrical.pdf

Others - Makelist • 1.02 MB

armoury Bidar.pdf

Others - Drawings • 0.47 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

SHARNAPPA MALLLIKARJUN PANCHAKSHARI

₹44.4 Laccepted-aoc