P/L CC flooring in streets near Hira auto road, factory area ward no.20 Est Cost Rs. 21.34 lacs dt 22/23.06.2026

Earth work of silt clearance of channels and drains Kassi work undressed involving an average horizontal throw up to 2 metres and average vertical life up to 0/5 metres

Excavation in soil (any type) using Hydraulic excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combinded lead upto 30m

Loading and unloading by mechanical means stone, (building or pitching) sand, earth fly Ash, Bajri, Shingle, Spalls, Brick bats, Brick ballast and stone metal

Earth, Surkhi, Sand, Earth, Fly Ash, Bajri, ballast, Stone boulders, Kankar and building rubbish, Earth. 5.0 km

Dismantling concrete Cement concrete plain 1:2:4 mix

Taking out existing CC interlocking paver blocks from footpath/ central verge/pavement, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge

Cement concrete 1:8:16 With stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type

Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with OPC 43 grade conforming to IS:383 mixed with concrete mixer using batch type concrete mixer as per IS:1791, laid in position, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vacuum pump, finishing the surface with power floater, finishing to required lines and grades as per drawings and technical clause 1501 of MORD specifications.

Providing & fixing 560 mm, 500 mm and 450 mm internal diameter circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete coping (M:20) around the frame etc. Dia of steel for lifting hook is 16 mm (for EHD and HD). RCC Manhole cover with Frame 455 x 610 mm rectangular clear opening RCC manhole cover with frame as per ISI Heavy duty

Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. 200mm o/d pipe