Setup of New Lab under the program water quality monitoring and surveillance.

Amount

Excavation in foundations trenches etc in earth work lift upło 1.50 mtrs. stacking the excavated soil not more than 3 mtrs clear from the edge of excavation and then returning the stacked soil in 15cm layers when required in to plinths, sides of foundations etc.consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within a lead of 20 mtrs in pick and jumper work 50% each.

Filling in plinth with sand under floors including watering ramm+B31ing consolidating and dressing complete.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finishing including centring shuttering, strutting and propping etc with wooden battens and ballis. height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs.and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended foors, roofs, landings and the like floor etc.upto 200mm in thickness including carriage of materials within all leads and lifts complete in all respect.

In foundation and plinth.

In flat surfaces upto 200 mm thick

In beams cantilevers

In coulmns

In edges of stab

Providing and laying cement concrete 1:6:12(1 cement.6 sand 12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth

Applying coat of hot bitumen (Maxphalt 80/100 equivalent using 1.70 kg/Sqm. and DPC after cleaning the surface with piece of cloth lightly soaked in kerosene oil.

Providing and laying cement concrete 1:3:6 (1cement:3 sand: 6 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work in foundation and plinth.

Providing and laying cement concrete work 1:1.5:3 (1 cement 1.5 sand: 3 water borne aggregate 20mm nominal size & curing complete excluding the cost of form work and reinforcement for reinforced concrete work in foundation and plinth.

In foundation and plinth.

In flat surfaces upto 200 mm thick

In coulmns

Providing and placing tor steel reinforcement for RCC work including bending, binding and placing in positon complete in all respect including entire carriage of material up to all lead and lifts

1st classBrick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:6(1cement:6sand)

1st class brick work using common bunt clay building bricks in supper structure in all heights and depth in cement mortar 1: 6 (1cement:6sand)

15mm cement plaster in single coat in rough side of brick/stone masonery for interior plastering upto floor two level including arrises, internal, founded angles,chamfers and/or rounded angles chamfers and/or rounded angles not exceeding in girth & finished even and smooth in cement mortar 1:5(1cement:5sand).

P/F pressed steel door frames manufactured from commercial MS sheets of 1.25mm thickness including hinges, Jamb lock jamb. Bead and if required angle threshold of MS angle 50 x 25 mm or base tie of 1.25mm pressed MS welded or rigidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb l/c steel butt hinges 2.5mm thick with guards, lock strike plate and shock as specified and applying a coat of steel primer after pretreatment or surface as directed by Engineer-in-charge.

Providing and fixing 1mm thick M.S.sheet door with frame of 40mmx40mmx6mm angle iron 3.15mm M.S. gusset plate at the junctions and corners including all necessary fittings, complete including applying a priming coat of red lead paint.using flat 30mm x6mm for diagonal braces and control cross/pieces.

Filling sand under floors including watering ramming consolidating and dressing complete.

Providing and fixing vitrified tiles 12 mm thick in flooring, and landing laid on a bed of 12 mm thick cement mortar 1:3 (1cement: 3 sand) finished with flush pointing in white cement.

P/F on wall face PVC rain water pipe i/c fitting and complete in all respect.

Applyirig Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matt finish to the surface complete.

Applying crylic Washable emulsion Spectrum quartz king or equivalent finish for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat i/c necessary putty to give smooth even surface, sand papered smooth complete.

Finishing wall with weather proof exterior grade emulsion of approved design (Apex ultima) or its equivalent on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper.

Painting two coats (excluding priming coat)on new steel work based surfaces, with ready mixed paint, brushing to give an even shade including cleaning of all dirt,dust and other foreign matter,sand papering and stopping, with paint other than white.

Providing plinth protection 50mm thick in cement concrete 1:3:6(1cement:3sand:6water borne stone aggregate 20mm nominal size)including finishing the surface of concrete smooth.

P/F aluminium tower bolts (berral type ) anodized transparrnt or dyed to required shade and colour with screws etc.complete (250X16).

Providing and fixing M.S fan clamp type-l of 16mm dia M.S bar bent to shape with hooked ends in RCC during laying including printing the expossed portion of loop, all as per standard design complete.

P/F PVC water storage tank of ISI 12701 marked, Gl inlet and out let connection 15 mm nominal bore ball valve and mosquito proof pvc cover with locking arrangment including hoisting upto all heights above ground level of 1000 litre

P/F vitreous china wash down water closet squatting pan 1. (Indian Type WC pan) size 580 mm (Earth work, bed concrete. foot rest and tap should be measured and paid for seprately (Orissa Pattern)

P/F PTMT coloured/ white high density polyethylene/ poly propylene 10 litre capacity (full flush) european standard control low level flushing cistern with fitting with a pair of brackets with fitting such as lead valve, syphon, 15 mm nominal size PVC ball valve with polythene float, with push button, coupling for connections with inlet, outlet and overflow pipe, 40 mm dia CP flush bend i/c cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for sepretely).

P/F high pressure PVC spigot and soaket waste and ventilating pipes ISI marked i/c fixing with approved adhesive etc. complete 110mm dia.

P/F PVC "P" or "S" trap for water closed (squatting Pan) ISI marked i/c jointing the with the pan PVC pipe with approved adhesive etc. complete 110 mm dia.

P/F brass bib tap (Superior or heavy type) of 15 mm dia .

P/F Kitchen Sink.

Wiring for light / Fan point / Exhaust fan point / call bell point with 1.5 Sq.mm PVC insulated heat resitant flame retardent ( HRFR ) of low smoke single core ( flexible ) copper conductor cable in PVC casing and capping and earthing the light point with 1.5 sq.mm HRFRLS / PVC insulated single Group " C " as required required including carriage of all material within all leads and lifts .

Wiring for light / power plug with 2 x 4 Sq.mm PVC insulated heat resistant flame retardent ( HRFR ) and low smoke single core ( flexible ) copper conductor cable in PVC casing and caping along with 1 no , 4sq . mm HRFRLS / PVC insulated single core copper as required including carriage of materials within all leads and lifts .

Wiring for light / power plug with 4 x 4 Sq.mm PVC insulated heat resistant flame retardent ( HRFR ) and low smoke single core ( flexible ) copper conductor cable in PVC casing and capping along with 2no , 4sq . mm HRFRLS / PVC insulated single core copper as required including carriage of materials within all leads and lifts .

Wiring for light / power plug with 2 x 1.5 Sq.mm PVC insulated heat resistant flame retardent ( HRFR ) and low smoke single core ( flexible ) copper conductor cable in PVC casing and capping along with 1 no , 4sq . mmHRFRLS / PVC insulated single core copper conductor cable as required including carriage of materials within all leads and lifts .

Wiring for circuit / sub main wiring with 4 x 1.5 Sq.mm PVC insulated heat flame retardent ( HRFR ) and low smoke single core ( flexible ) copper conductor cable PVC Casing & capping along with 2 no , 2.5sq . mm ( 4x2.5 + 2x2.5 ) HRFRLS / PVC insulated single core copper conductor cable as required including carriage of materials within all leads and lifts .

Supplying and fixing metal box of 100 x 100 x 60mm deep ( Nominal size ) on surface / recess with suitable size phonolic leminated sheet cover fixing 3 pin 15/16 amps socket tumber / piano type switch connections painting etc. including carriage of materials within all leads and lifts

S/F of 6 amps to 32 amps rating 10 KA breaking capacity 240 Volts , " C " curves miniature circuit breaker of following poles in the existing MCB DB complete with connections testing and commissioning etc. as required including carriage of materials within all leads and lifts Category - A single pole .

Supplying and fixing 40 Amps / 50 amps / 63 Amps rating 10 KA breaking capacity 240 Volts " C " curves miniature circuit breaker of following poles in the existing MCB DB complete with connections , testing and commissioning etc. as required including carriage of material within all leads and lifts .Double pole Category- B 63 Amps .

Supplying and fixing of following way single pole and neutral sheet steel MCB distribution board 240 volts , on surface / recessed complete with tinned , copper busher neutral link , earth bar , din bar , detachable gland plate , interconnections , including painting , earthing etc. as required : bus bar 8 way .

Providing, installing, testing and commissioning of 2x36 watt - CFL surface mounting (categary "A" including wiring with 1.5 Sq mm PVC insulated copper conductor single core cable etc.as required.

Providing , installing , testing and commissioning of ceiling fan and regulator including wiring the rod of standard length ( upto 30 cm ) with 1.5 Sqmm PVC insulated copper conductor single core cable etc.as required 1200 mm sweep.Category A

Providing, installing, testing and commissioning of 1x36 watt - 4 FTL (T8) shock proof slim (categary "A" including wiring with 1.5 Sq mm PVC insulated copper conductor single core cable etc.as required.

J.J. ENTERPRISES

HANS RAJ CONTARCTOR

SHYAM LAL