SPL REPAIR TO LT PANEL AND CONVERSION OF LT OH LINE INTO UNDERGROUND LT CABLE WITH ALLIED WORK AT 16 RAPID AT SRI GANGANAGAR MIL STATION

Amount

Supply & Fixing and testing of LT cable 1100 volts grade XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor suitable for earthed system of size 120 sq mm 3.5/4 core in trenches, on poles and in ducts complete all as specified and directed by Engr in charge. (Excavation, earth work, bricks and sand cushioning shall be measured and paid separately).

Supply & Fixing and testing of LT cable 1100 volts grade XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor suitable for earthed system of size 50 sq mm 4 core in trenches, on poles and in ducts complete all as specified and directed by Engr in charge. (Excavation, earth work, bricks and sand cushioning shall be measured and paid separately).

Supply & Fixing and testing of LT cable 1100 volts grade XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor suitable for earthed system of size 25 sq mm 4 core in trenches, on poles and in ducts complete all as specified and directed by Engr in charge. (Excavation, earth work, bricks and sand cushioning shall be measured and paid separately).

Supply & Fixing and testing of LT cable 1100 volts grade XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor suitable for earthed system of size 16 sq mm 4 core in trenches, on poles and in ducts complete all as specified and directed by Engr in charge. (Excavation, earth work, bricks and sand cushioning shall be measured and paid separately).

Supply & Fixing and testing of LT cable 1100 volts grade XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor suitable for earthed system of size 10 sq mm 4 core in trenches, on poles and in ducts complete all as specified and directed by Engr in charge. (Excavation, earth work, bricks and sand cushioning shall be measured and paid separately).

Supply & Fixing and testing of LT cable 1100 volts grade XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor suitable for earthed system of size 10 sq mm 2 core in trenches, on poles and in ducts complete all as specified and directed by Engr in charge. (Excavation, earth work, bricks and sand cushioning shall be measured and paid separately).

Supply, fixing and testing of LT flexible FR PVC insulated round sheathed, copper conductor (flexible) industrial cable, 1100 volt conforming to IS-694 suitable for on poles and in ducts, size of 3 core 2.5 sqmm, complete all as specified and directed by Engr-in-Charge. Make : Havells code WHMFDSKB32X5 or equvilent.

M&L for earthing of electric equipments with galvanized steel earth plate electrode 600x600x6mm thickness not less than 6mm thick, buried directly in ground (earth plato not less than 2.25 metrs deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connecting to and including galvanized iron strip 32x6mm as earthing lead by means of galvanized iron bolts, nuts, check nuts and washers, check nuts of GI steel all as shown in electric plate no 3 in SSR part-I (2009) connected to earth test point made out of aluminum of size 75x75x10 mm all as specified and indicated complete and including charcoal dust, salt etc and GI protection pipe, medium grade 40 mm and GI watering pipe 20 mm, medium grade with with funnel and wire mesh, 40 mm thick pre cast RCC 1:1 1/2:3 (normal mix) cover reinforced with XPM weight not less than 4 kg/sqm with suitable handle of 6mm dia MS bar and angle iron 40x40x3 mm frame for cover, PCC 1:1 1/2:3 (normal mix) pit, excavation and earth work in any type of soil and connected complete all as specified and directed by Engineer-in-Charge.

Supplying, installing, commissioning and testing of factory made LT Panel board of size 1.2x1.2x0.6m ,out door CPRI aprroved of cubical type made out of 3.15 mm thick CRCA sheet confirming to IS-8623 out dooor type totally enclosed double door hinged type front & rear opening weather proof dust vermin proof with canopy slope tope powder coated painting locking arrangement, magnetic catch as directed entry holes and glands of siutable size of incoming/outgoing cable mounted on including MS angle iron stand fabricated out of 50x50x6mm angle iron frame with a clearance of at least 0.45 mtr above gd level and 0.3 mtr below gd level incling reqd PCC for foundation and copping , internal coper control wiriing suitable size for instrument/indicators etc suitable size of copper strip for power cable connection from copper bus bar of high quality electrical grade of rating 1.5 tiomes for incomer including removing all panel connection and complete all as specifed and directed with following accessories. Location Bhagat Enclave Near Block 971/972. INCOMING:- (a) Micro processor based release MCCB 400A, 35KA, 4 pole , 415 volt 50HZ . -01 No (b) Set of three phase indicating lamps-01 Set. (c) Panel mounted LCD display meter in 96x96 sqmm flush mounted case accuracy class 1.0 to o.5 to measure Voltage,Current,Frequency ,power factor,,Power ,THD ,30 days load survey relays with Rs 485 with suitable size of CTsMake HPL cat part No emifis plus / equiavalent make OUTGOING:- (a) MCCB 4 pole, 415 volts, 200 Amp with breaking cap 25 KA-02 Nos ,TAB2 Adjustable tharmal & Fixed Magnatic Type (b) MCCB 4 pole, 415 volts, 100 Amp with breaking cap 25 KA-02 Nos ,TAB2 Adjustable tharmal & Fixed Magnatic Type (c) MCCB 4 pole, 415 volts, 63 Amp with breaking cap 25 KA-05 Nos ,TAB2 Adjustable tharmal & Fixed Magnatic Type Note :- LT Bus bar 3 phase and neutral made out of copper strip 1 No. capacity and rating 1.1 times of incomer breaker -01 set

Supplying, installing, commissioning and testing of factory made LT Panel board of size 1.2x1.2x0.6m ,out door CPRI aprroved of cubical type made out of 3.15 mm thick CRCA sheet confirming to IS-8623 out dooor type totally enclosed double door hinged type front & rear opening weather proof dust vermin proof with canopy slope tope powder coated painting locking arrangement, magnetic catch as directed entry holes and glands of siutable size of incoming/outgoing cable mounted on including MS angle iron stand fabricated out of 50x50x6mm angle iron frame with a clearance of at least 0.45 mtr above gd level and 0.3 mtr below gd level incling reqd PCC for foundation and copping , internal coper control wiriing suitable size for instrument/indicators etc suitable size of copper strip for power cable connection from copper bus bar of high quality electrical grade of rating 1.5 tiomes for incomer including removing all panel connection and complete all as specifed and directed with following accessories. Location Bhagat Enclave Near Block 971/972. INCOMING:- (a) MCCB 4 pole, 415 volts,200 Amp with breaking cap 25 KA-01 Nos ,TAB2 Adjustable tharmal & Fixed Magnatic Type (b) Set of three phase indicating lamps-01 Set. (c) Panel mounted LCD display meter in 96x96 sqmm flush mounted case accuracy class 1.0 to o.5 to measure Voltage,Current,Frequency ,power factor,,Power ,THD ,30 days load survey relays with Rs 485 with suitable size of CTsMake HPL cat part No emifis plus / equiavalent make OUTGOING:- (a) MCCB 4 pole, 415 volts, 63 Amp with breaking cap 25 KA-07 Nos ,TAB2 Adjustable tharmal & Fixed Magnatic Type Note :- LT Bus bar 3 phase and neutral made out of copper strip 1 No. capacity and rating 1.1 times of incomer breaker -01 set.

S&F on pole/wall/in panel/with fabrication of stand, sheet metal enclosure, Bus bar chamber consisting 4 pole 200 Amp 415 volts aluminium busbar suitable for connecting cable as a junction including connecting of cables with suitable size aluminium thimles, cable glands including earth work and PCC complete all as specified and directed by Engineer-in Charge.

Painting on steel tubular poles with MS Clamps and GI Bracket 10 mtr height with one coat of superior quality of aluminium paint incl preparation of surface by rubbing complete incl painting of steel poles with synthetic enamel paint each of 30 cm width upto 1.5 mtr height from Gl amd making of pole numbers serially with painting 150mm circle with yellow paint and writing ST-01and so on with black paint complete all as specified and directed by Engineer-in Charge.

Dismantling of cross-arms of M.S. channel or angle sections etc and ACSR conductor of any size and capacity including connected items from over head ines complete all as specified and directed by Engineer-in-Charge.

Dismantling of steel poles/ struts, any size and deposited to main sub station/stores complete all as specified and directed by Engineer-in-Charge.

Supply and fixing automatic street light switch of rating85 KW in three phase using nature sensor for automatic switching "ON/OFF" of steel lighting based on lux level of natural light along with 40 Amps Four pole contactor, MCB 40 Amps four pole with support terminals prewired with PVC insulated 25 sqmm multi strand copper wire enclosed/housed in pole wall mounted enclosure made of rust proof, shock proof, termite proof & dust proof FR grade moulded compound Junction Box complete all as specifed Model-SWADEEP -02EC 8KW 3, Make -1 Nature switch/Kaktiya Energy systems Pvt ltd/ HEALER/ BAJAJ 2. Contactor :BCH/L&T/Schneider 3. MCB: Hager/Schneider /Legrand 4. Circuit wiring : Finolex/Polycab

S&F PVC Junction box of size 40x30x19cm with hinged door including locking arrangment and MCB SP 6 Amp with necessary nut,bolt etc and including TPN aluminium bus bar mounted on insulators with suitable holes to provide incoming and outgoing LT cables and street light MCB complete all as specified and directed

Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth; or n exc 10 Sqm on plan and n exc 1.5 m in depth for foundations of poles, struts, stays etc. or laying underground cable etc. in soft/loose soil, & getting out including taking out old brick or precast cable cover for reuse complete all as specified and directed by Engineer-in-Charge.

M&L cement concrete 1:3:6 type C-1 using 20mm graded stoe aggregate for pole pedestal (PCC) incl necessary form wik etc complete all as specified and directed by Engr-in-Charge.

Returning, filling in, excavated soil including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engineer-in-Charge

Removal of excavated surplus soil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed

M & L for sand cushioning with dry coarse sand to under ground cable around the cable after laying the cable complete all as specified and directed by Engineer-in-Charge. Note : Thickness after punning shall be considered for payment.

M & L for brick protection with old size sub class 'B' bricks laid flat , length of bricks across the route of underground cable complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement GI pipe 40 mm bore light grade for protection of cable laid under the road / laid under the floor or in trenches complete all as specified and directred by Engineer-in-Charge.

Supply and fix in replacement GI pipe 80 mm bore light grade for protection of cable laid under the road / laid under the floor or in trenches complete all as specified and directred by Engineer-in-Charge.

M&L for boring holes under road/pavement/hard standing or any other situation by manual means suitable for passing GI pipe 80 mm bore and making good both the ends complete all as specified and directed .

M&L for GI clamps, 1.2 meter bracket for street light, nut bots , fabricated fromstructural steel sections incl nut,bolts, ,washers, welding, ,bending cold or hot , drilling holes for bolts , in any size all as specified and directed by Engr-in-Charge.

Note : Notes : (i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

DASHMESH ENTERPRISES

ROYAL BUILDERS