Construction of 40 Nos. of Firemen Quarters with development works at Perumbakkam in Chengalpattu District under CM announcement Scheme

Amount

1.1) Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

7.2) Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1) Filling with Excavated Earth

15.1) Cuddappa slab 20 mm tk.for C/B slab. a. In Stilt / Ground floor

b. In First floor

c. In Second floor

d. In Third floor

e. In Fourth floor

f. In Fifth floor

15.2) Cuddappa slab 40 mm tk.for C/B slab. a. In Stilt / Ground floor

b. In First floor

c. In Second floor

d. In Third floor

e. In Fourth floor

f. In Fifth floor

21.2) Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3) Supplying & fixing of Magnetic door catches

25) M.S.Holdfast

30) Ellispattern

31) Weathering course

37.1) White washing 3 coats (slaked)

39) M.S Grills

40) Painting - New "wood work"

41) Painting - New "iron work"

45.2) Stucco Plastering 12mm thick using colour Marble chips of size 10mm and below using 72 kgs of cement and 0.15 m3 colour marble chips

46) Supplying & fixing 20 mm dia Alu. Hanger Rod

47) Supplying & fixing Alu Towel rail 75 cm long

48) Supplying & fixing 5 pin Coat stand

49) Supplying & fixing chromium plated 8 guage Picture Hook

50.3) Supply and planting avenue trees

50.4) Providing Tree guard

52.1) G.I Pipe 20mm dia for Hot water line (Fully Concealed in walls)

53.3) C.I. Steps ( 5 kg)

Electrical arrangement 72) Box type Fibre Fan hook

74) Charges for fixing of "Fan"

76) 8 SWG wire

77.3) Supplying & fixing of TV/Telephone line Socket

77.4) Supplying & fixing of 20mm dia PVC pipe for TV/Telephone line

78) Earthing Station IS3043 (Type I)

86) Anti termite treatment

112) Supplying & fixing of Exhaust Fan 300mm dia

238) Anticorrosive treatment for steel grills

Annexure 1.5.3) Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers

2.1.1) Filling C.S. sand

2.15) Supplying and filling stone dust

3.1.3) C.C.1:5:10 for Foundation & Basement

3.2.3) P.C.C. 1:2:4 for Foundation & Basement and other similar works

3.6.2.1) Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification

6.2.2) Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3")

8.2.3.1) Standardised concrete Mix M30 Grade Concrete a. In Foundation and basement

b. Stilt / Ground Floor

c. In First Floor

d. In Second Floor

e. In Third floor

f.In fourth floor

g.In fifth floor

h.In sixth floor

9.2.2) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") a. In Ground Floor/Stilt floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

f. In Fifth floor

g. In sixth floor

10.2.2) Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm tk (B.P.) b. In Ground Floor/stilt floor

c. In First Floor

d. In Second Floor

e. In Third Floor

f. In Fourth Floor

g. In Fifth floor

11.2.2) Brick work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 75 mm tk (B.P.) b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

F. In fifth Floor

12.1.2) Brick partition in C.M. 1:4 using country bricks of size 22 x11x5cm 50 mm thick a. In Stilt /Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

F. In fifth Floor

16.5) Precast Jally ventilator 50mm tk.using standardised concrete mix M30 without vibrating charges a. In Stilt/Ground floor

18.1) Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Vertical wall

f.Curved surface

21.5.2.2) Supply and Fixing Solid UPVC door Shutter with frame

21.6.2.2) R.C.C.Door frames of size 100 x 75mm with one edge grooves size 't' x 20 mm using M30grade ( with out vibrating charges) a. 900 x 2100 mm

22.3.3) T.W. frame & TW styles & rails with BWR double leaf shutters for cup board/ ward robes including two coat enamel paint & one coat primer.

23.1.8) TW styles & rails with 9mm thick BWR single leaf door shutters with brass screws size of 900 x 2100 mm

26.1) Flooring in C.C.1:5:10

27.1.2) B.W. in C.M. 1:4 for staircase steps Chamber burnt bricks 23 x 11.2 x 7 cm.

28.1) Floor plastering in C.M. 1:4, 20 mm tk.

29.8.1) Glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm tk

29.9.1) Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).

32.1.1) Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in cm 1:3

33.2.1) Plastering in C.M. 1:5, 12 mm tk.

34.2.1) ) Plastering in C.M. 1:4, 12 mm tk.

35.2.1) Spl. Ceiling plastering in C.M. 1:3, 10 mm tk.

36.1) Cement mortar Border in C.M. 1:5, 12 mm tk. a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

43.2.1) Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.(BINDING WIRE insulated with PVC)

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit (M30)

b) Augering 30cm dia

44.5.3.1) Providing Rain Water Harvesting well ring in circular shape of 90cm dia, 60cm depth (30cm depth 2 Nos) 50mm thickness using standardised concrete mix M30 grade

44.6.1) PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe(UPVC SPECIAL CLAMP )

50.2.1) Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm

50.5.1) Supplying. Fabricating and erection of M.S Scheme Name board

52.1.1) Supply ,laying & jointing the following pipes as per ASTM D 1785 of schedule 40 with UPVC Specials a. 32 mm dia

b. 25 mm dia

52.4) Supply ,laying & jointing the following pipes as per ASTM D 1785 of schedule 40 with UPVC Specials (fully consealed in walls) c. 20mm dia PVC water supply ASTM pipe

52.5) Supply of 75mm dia PVC pipes

52.9) Supply and fixing of 50mm dia MS clamp set

53.4) Supplying & fixing of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5) Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.2.1) Supplying & fixing of 15mm dia Engineering Polymer Tap (long body ) for coastal area only

54.2.2) Supplying & fixing of 15mm dia Engineering Polymer Tap short body tap for coastal area only

56.3.1) Supplying & fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap - in G.F.

56.4.1) Supplying & fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap- Other than G.F.

57.1.1) Supplying & fixing of E.W.C.(White) 500 mm with "P" or "S" TRAP with double flapped seat & seat cover

58.3) PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4) Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

59.2.1) Gully Trap using chamber burnt bricks of size 23x11.4x7.5cm

60.1) PVC Nahani trap (4way/2way)

61.3) UPVC Non Pressure pipe of SN8 SDR 34 ( S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

64.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. ( PVC Box , Fire Retarded Box) a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.(PVC Electrical Box )

66.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.(PVC Electrical Box )

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.(PVC Electrical Box )

69.2) Supplying and fixing of 15 Amps 3 pin flush type plug using ( PVC Box , Fire Retarded Box)

70.5.2) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light

70.5.4) Supply and fixing of 2' long 10 W batten LED fitting complete with all accessories on wall / ceiling

75.2) Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletcronic Dimmer

77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

81.1) Supply and fixing of TNEB meter board suitable for 3 phases connection .

82.2) Providing and fixing of lightning conducter finial, made of 25 mm dia 300 mm long, copper tube,

82.3) Supply, installation, testing & commissioning of 100mm dia cast iron earth electrode

82.3.1) Supply and fixing of LED Street lighting luminaries suitable for fixing 25 watts LED lamp

82.4) Supply and fixing of twin arm suitable for 100 W BC lamp / 6 W LED lamp

82.5) Emergency Lighting Supply, Installation, Testing and Commissioning of 3 KVA invertor with 30 Min battery back-up, Single Phase

84.3) Run off 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

85.4) Supply and run of 50 mm dia GI pipe on wall

93.1) Plastering with CM 1:3, 12mm with WPC

96.7) Supply and Laying Rubber Moulded Hyraulic Pressed Paver Block 83 mm thick including labour charges for laying etc

98.5.1)TW panelled single door shutter with brass fittings. a. 1000X2100mm.(Single leaf) For Qtrs

105.1) 4 x 4 Sq mm copper PVC insulated unsheathed single core cable for 3 phase EB service connection

144.3.1) Supply and fixing of 80W LED street light

149.3.1) Supply and erection of hot dip galvanized 7.0m. Free standing Double Arm bracket 8 sided octogonally .

149.3.2) Supply and fixing of SMC fuse box ( IP 65 rating) containing 1 No. 32 A 4 way terminal block, 1 No. 10A,10 KA TPN

149.3.3) supply and fixing of 40 mm dia GI pipe fixed to the octagonal street light pole

151.3.1) Supply and laying of the following size of PVC LTUG aluminium armoured cable (below GL) a) 3.5 c x 185 sq.mm. PVC LTUG aluminium armoured cable

b) 3 .5 c x 120 sq.mm. PVC LTUG aluminium armoured cable

c) 3.5 c x 25 sq.mm. PVC LTUG aluminium armoured cable

d) 4 c x 16 sq.mm. PVC LTUG aluminium armoured cable

e) 4 c x 10 sq.mm. PVC LTUG aluminium armoured cable

f) 2 c x 10 sq.mm. PVC LTUG aluminium armoured cable

155.1) Supply and erection of 250Amps floor mounting type metering panel board (Cubical type) OF SIZE 10'x6'x1.5' with bus bar chamber made up of 16 SWG MS sheet for 3 phase 4 wire system

155.2) Supply and erection of 200 Amps capacity floor mounting type metering cubical type panel board

155.3) Supply and erection of 125Amps floor mounting type metering panel board (Cubical type)

155.4) Supply and erection of 63 Amps capacity floor mounting panel board (Cubical type) with bus bar

161.1.4) Supplying and fixing of brass cable gland suitable for following core sqmm PVC armoured LTUG cable a) 3.5 c x 185sq.mm. PVC LTUG aluminium armoured cable

b) 3 .5 c x 120 sq.mm. PVC LTUG aluminium armoured cable

c) 3.5 c x 25 sq.mm. PVC LTUG aluminium armoured cable

d) 4 c x 16 sq.mm. PVC LTUG aluminium armoured cable

e) 4 c x 10 sq.mm. PVC LTUG aluminium armoured cable

f) 2 c x 10 sq.mm. PVC LTUG aluminium armoured cable

161.4) Supply and providing cable end termination of following PVC LTUG Aluminium armoured cable a) 3.5 c x 185 sqmm PVC LTUG aluminium armoured cable

b) 3 .5 c x 120 sq.mm. PVC LTUG aluminium armoured cable

c) 3.5 c x 25 sq.mm. PVC LTUG aluminium armoured cable

d) 4 c x 16 sq.mm. PVC LTUG aluminium armoured cable

e) 4 c x 10 sq.mm. PVC LTUG aluminium armoured cable

f) 2 c x 10 sq.mm. PVC LTUG aluminium armoured cable

162.2.1) Supplying and clamping of PVC armoured LTUG cable(Above GL) c) 4 core 2.5sqmm. PVC LTUG aluminium armoured cable from alternator to the proposed DG panel on wall

171.2.8) Supply and delivery of clear water vertical wet type submersible pumpset 75 LPM x 50m

171.2.9) Supply and Delivery of Openwell Pumpset with ISI mark IS 8034 without Panel Board of capacity 900 LPM X 60M

175.1.6) Supplying, Fixing and testing and commissioning of MCB in a sheet steel enclosure with earth connection a. 40 A TPN 10 kA MCB

b. 10/20/32A DP MCB

c. 63A TPN MCB

175.2.1) Supply and fixing of vertical type 4 way triple pole and neutral MCB sheet steel enclosure with bus and neutral link

178) Earthing Station using Pipe electrode as per IS 3043 using 2.1 m of 40 mm dia and 0.15 m of 19 mm dia B Class. GI pipe

179) Plate earthing with copper plate of size 600 x 600 x 3 mm

179.1) Providing and fixing 25mm x 3mm copper strip on surface or in recess for connections as required

179.2) Providing and fixing 25mm x 6mm copper strip on surface or in recess for connections as required for alternator neutral

180) Supply and run of 2 of No.8 copper wire for earth connections

180.2.1) Labour charge for laying of following PVC insulated and sheathed flat type copper cable (below GL) a) 3 core 4 sqmm PVC insulated and sheathed flat type copper cable .

180.2.2) Labour charge for laying of following PVC insulated and sheathed flat type copper cable (above GL ) a) 3 core 6 sqmm PVC insulated and sheathed flat type copper cable .

202.1) Supplying and fixing of 100mm dia GI pipe

205.2) Providing and fixing G.I. tape 25 mm x 6 mm thick (For horizontal run)

205.3) Providing and fixing G.I. tape 25 mm x 6 mm thick (For vertical run)

207.3.1) Providing two coats of Plastic Emulsion paint including primer for inner walls

207.4.1) Painting the new walls with two coats of approved best exterior Emulsion paint in addition to one coat of approved primer paint over cement plastered wall surfaces

213.1) Supplying & fixing of SFRC manhole cover 600x600mm

238.1) Anticorrosive treatment for window grills

255.2) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder a) 9watts LED bulb

b) 12 watts LED bulb

255.6) Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

344.2) Supplying & fixing of Bevelled edge mirror 500 x 400 x 5.5mm

359.3.1) Concrete designer tiles flooring

361.5) Vitrified Tiles flooring (Ivory)

367.1) Providing wooden Melamine polish for new wood work

379.7.1.1)Supplying and fixing of PVC Trims / Corners beeding suitable colour in toilet wall cladding in all floors

379.8.2)Supplying & fixing of Granite tile of size 2'x 1', 10mm Thick For kitchen arrangements (jet black) C.M 1:3, 10mm tk b. In First floor

c. In Second floor

d. In Third floor

e. In Fourth floor

f. In Fifth floor

379.8.5) Supplying and fixing of Ruby Red / Raw silk colour Granite Tiles of 10mm thk (wall Cladding ) in C.M 1:2

379.9.2) SSupplying and fixing of rubber round column guards of size 550mm x 75mm x 10 mm on the existing R.C.C Columns corner surface

379.9.3) Supplying and fixing of plastic speed Breakers of size 500mm x 425mm x 75 mm and existing concrete roads

379.9.4) Supplying and fixing of Convex Mirror 60cm dia with plastic caver

382) Supplying & fixing of Cuddapah sink 600 x 600 x 200mm

383.1) Providing single nosing to the edges of Granite slab at entrance steps

384) Supplying & fixing of PVC flushing cistern

451.3.2) Supplying and fixing of best approved quality of following CP water supply/Sanitary fittings a) CP two Way bib cock with health faucet

b) CP Shower Arm with Overhead shower rose

c) CP Angle valve Stop cock

503.1) Supply and laying of required dia of Nylon rope

504.5) Supplying, laying, fixing and jointing the following UPVC pipes as per D- 1785 of schedule 40 (Above GL) a. 65mm dia UPVC pipes (Above Ground level)

516.1) Coil earth to steet light poles with No.8 SWG GI wire of 11.5 mtrs of length

608) Supply and fixing UPVC Pipe (below Ground level) a.40mm dia UPVC pipes

b.50mm dia UPVC pipes

c. 80mm dia UPVC pipes

609.6) Supply and delivery of 150mm OD of PVC casing pipes (6kglcm2) as per IS 12818

609.6.1) Supply and delivery of 150mm OD ribbed screen pipes (6kglcm2)

609.6.2) 200mm OD of PVC casing pipes (6kglcm2) as per IS 12818 2010 of approved quality for borewells

609.6.3) Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) i) l50mm dia casing pipes assembly

615.2.1) Labour charges for the erection of submersible pumpset in borewell/openwell a)Up to 5 HP

615.3.1) Supplying and fixing of Star Delta starter confirming IS13947 of approved make suitable for three phase for submersible Pumpset a)Up to 3 HP

a)Up to 5 HP

619)Supply and fixing of following dia GI Specials of best approved quality, c. 65mm dia GI Union

619.2) Supplying and fixing of following dia butterfly valve a. 80mm dia butterfly valve

619.2.1) Supplying and fixing of following dia GM Non return Valve a.80 mm GM Non return Valve

b. 40mm GM Non return Valve

619.5)Supplying and fixing of following dia GM Wheel Valve (Heavy duty) a. 65mm GM Wheel valve with brass

706.4.1) Supply and fixing of manually operated phase changer board

707.2.1) Supplying of following PVC insulated and sheathed flat type copper L.T. cable a) 3 core 6 sqmm PVC insulated and sheathed flat type copper L.T. cable

b) 3 core 4 sq.mm flat type copper cable

725.2) Supply and fixing of MS cable box of suitable size on wall for the entry of 4 x 10 sqm /3.5c x 25 sqm with cable gland suitable for the above size with earth connection

741.1.1) Supply and fixing of 20 Amps DP plug and ( For AC Plug )

799.1) Drilling of Borewell anywhere inculding transportation from one place to another place in alluvial soil or sedimentary a) Drilling of borewell in upto 60m

799.1.2) Reaming from 150mm dia pilot bore to 300mm dia bore as directed by the departmental officer’s up to 60m depth ending from ground level.

799.3) Charges for developing the borewell forthe entire depth with air compressor of 300 CFM capacity [Minimum 8 hours]

799.3.1) Supplying and fixing of 160mm dia PVC end cap for borewell

832.5.2)Supplying and fixing in position of UPVC window of casement type( open) for all sizes

832.5.3)Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

945.7) Providing 6 lever lock and 3 set key arrangement

Lift Arrangements 958.4) Design Engineering Supply, Fabrication, Erection, Testing, commissioning and handling of 13 persons (884 kg) capacity (G+5 floor)

958.5) Annual Maintance Charges for the lift i) 2 years

ii) 3 years

iii) 4 Years

iv) 5 years

959.2) Erection, Testing and commissioning of 62.5KVA Diesel generator set.

959.3) Insulation for the residential silencer (supply of residential silencer to be included under item for DG Sets)

959.4) Supply and installation of M.S. cable adopter box

959.5) Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia

959.6) Supply and installation of MS exhaust pipe of suitable thickness with 125 mm dia complete with MS wall / ceiling support, etc.

959.7) Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool

959.8) Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe

959.9) Preparation of necessary drawings for approval CEIG

LETTERING & NUMBERING 960.4.1) Supplying and fixing of Aluminium TNPHC Emblem of 30" height with approved coloured powder coat in finishing matt

960.4.3) Supplying and fixing of Aluminium TNPHC Emblem of 12" height with approved coloured powder coat in finishing matt

960.4.5) supply and fixing of 20"x 5" size plastic foam name plate with vinyl cutting letter

960.4.6) supply and fixing of 24"x 8" size plastic foam name plate with vinyl cutting letter

960.4.7) Supplying and fixing of 6" height Aluminium letters with approved coloured powder coat in finishing matt

960.4.8) Supplying and fixing of 5" dia plastic foam plate of 3mm thick with 3"height number

960.4.9) Supplying and fixing of 8" dia plastic foam plate of 3mm thick with 3"height number

EEE PEE S AND CO

P GANGADARAN

PTM PROJECTS PVT LTD

Bidder Name

PTM PROJECTS PVT LTD

Unic Associates

P GANGADARAN

EEE PEE S AND CO