CERTAIN REPAIR TO RCC FACIA CHHAJJA RAIN WATER PIPE RCC COLUMN VALLEY GUTTERS ROOF TREATMENT UNDER AGE BR II FOR CABS STIR AND CEMILAC AT BANGALORE

Amount

M&L wet shortcrete(Gunniting) (M25) mix of cement concrete applied from a nozzle with compressed cleaned air and water added to the nozzle and approved admixture to attain quick setting and high strength including cutting chiseling,making good and panting should be match with existing surface as per directed by Engr-in-Charge.

Demolition of RCC as in Chajja of fourth storey building or height upto and including 15 mtr etc., including cutting old reinforcement to facilitate demolition complete

M&L reienforced cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in chajja of four storey building or height upto and including 15 mtr etc including necessary form work/scaffolding etc complete all as specified and as directed

Mild steel bars 10mm dia and over for fourth storey building height or height upto and including 15 mtr etc., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete

Taking down chowkats or frame (without taking off shutter from the frame) exc. 1.50 Sqm but n exc 4.00 Sqm each complete

Taking down chowkats or frame (without taking off shutter from the frame) n exc. 1.50 Sqm each complete

S&F in repairs providing and fixing factory made uPVC white colour sliding window of area n.ex 2.0 sqm each. Three track made of extruded profiles with wall thickness of 2.3 mm (plus or minus 0.2 mm). Window profile with hollow section with multi chamber, frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm), sliding mesh sash (42 mm x 57 mm), sliding interlock (one vertical length in each shutter) (45.5 mm x 28 mm), Glazing bead (24.5 mm x 16 mm) will be mitred cut and fusion welded at all corners, including railing of holes for fixing of hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 plus or minus 0.2 mm thick galvanized steel frame (30 mm x 18 mm) 2 nos, sliding sash (30 mm x 18 mm), sliding mesh sash (26 mm x 10 mm), profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, Hardware : (touch lock of zink alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and required accessories) Note : the unit rate quoted by contractor excluded cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose)

S&F heat obsorbing glass of 4 mm thick for fixing in uPVC window complete all as specified and as directed.

Hacking out old brocken glass of any thickness size quality or description from wooden frame or stone concrete or brick.

S & F sheet glass 4mm thick for window ordinery quality in n exc 0.75 Sqm in each pan with rubber beading as in doors and partition complete

M&L Rough cast wire glass, 6.4mm thick and glazing with oil putty in square n exc 0.75 Sqm. Note :- The height of the building is Upto 20 m, should include scafolding and safety measures.

S&F Steel rooling shutters with gear operated type with bevel gear box and crank handle thickness of lath 1.25mm including top cover anchring rod haps and staple and one shop coat of primer erected in position including taking down old rooling shutter complete.

Taking down Steel rolling shutters and refixing in same opening after greasing ,oiling making good smooth functionand painting one coat of synthetic enamel paint any size of shutter , complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for PCC 1:2:4, type B1, average thickness 40-70 mm thick (using 20 mm graded stone aggregate) as in flooring/ paving finished rough to receive cement tiles complete all as specified and as directed

M&L Vitrified ceramic tiles of size 10 mm thick Double Charged light shade, area of each tile n.exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed (MAKE:HR JOHNSON/KAJARIYA/SOMANY)

M&L Vitrified ceramic tiles of size 10 mm thick Double Charged light shade, area of each tile n.exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed (MAKE:HR JOHNSON/KAJARIYA/SOMANY)

M&L Granite (of any type) work 20 mm thick (table rubbed and polished)in steps, jambs, pillars, windowcills, cooking platforms and like in including cement mortar (1:4) pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified and as directed

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed (MAKE:HR JOHNSON/KAJARIYA/SOMANY)

Material and labour for glazed coloured ceramic tiles in vertical surfaces for wall tiles of size 450 x 300 x 7 mm thick as in dados, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles with joint free including 10mm thick screed bed in cement mortar 1:4 complete all as specified and as directed (MAKE:HR JOHNSON/KAJARIYA/SOMANY)

Dismantling boarding, any description, fixed in any position with screw

Supply and fixing of armstrong ceiling system with fine fissured edge tiles having humidity resistance (RH) of 95%, NRC 0.34 light reflectance approx 84% Thermal conductivity K=0.052 - 0.057. W/mk colour white fire performance of class-I as per BS 476 part 6 & 7 in module size of 600 x 600 x 16 mm thick suitable ofr green building appliation with recycled content of 38-41% with Armstrong silhouette profile exposed grid system with 15 mm white flanges incorporating 6 mm central reveal in white/black colour. Silhoutte, main runners & cross tees to have mitred ends & birdsmouth notches to provide mitred cruciform junctions. The Tee sections have a galvanising of 170 gms per sqm & passed through 500 hrs of salt test. The main runner spaced at 1200 mm c/c should be securely fixe to the structural soffit using Armstrong suspension system at 1200 mm maximum c/c. The first/last Armstron suspension system at the end of each main runner should not be greater than 450 mm from adjacent wall. Cross Tees 1200 mm long should be interlocked between main runners at 600 mm c/c to form 1200 x 600 mm module. 600 x 600 mm module is fortned by fitting 600 mm long flush fitting cross Tees, Perimeter trim consist of Armstron wall angles of size 3000 x 19 x 19 mm secured to walls screws at 450 mm c/c

Taking down UPVC (SWR) pipes any dia.

Supply and fix 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

Supply and fix 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete

Supply and fix PVC (SWR) bends any radius 75 mm dia of bore.

Supply and fix PVC (SWR) bends any radius 110 mm dia of bore.

Supply and fix PVC (SWR) gully trap 125/110mm, setting and jointing with solvant cement.

Supply and fix PVC (SWR) floor trap 75 mm dia out let with grating plain including jointing with solvant cement.

Supply and fix UPVC (SN4) pipes single socketed 160 mm bore laid in floor trenches/wall (ht Upto 20 Mtr including all fittings like bends shoe & necessary scaffolding) complete all as specified and as directed

M&L for PCC 1:2:4 type B0, 25 mm thick using 12.5 mm graded stone aggregate as in roof padding finished even and smooth including demolition old concrete complete all as specified and as directed

M&L APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (Weight not less than 150 gms/Sqm) laid on primed surfaces by forced application incl bituminous primer including taking down old App sheet & bitumen confirming to IS-3384 applied @ 0.3 ltr/Sqm and applying aluminium paint @ 100 ml/Sqm complete all as specified and directed. Four course of roof treatment consist of as under :- (a) Applying one coat of bituminous primer conforming to IS 3384 @ 0.3 ltr/Sqm (b) Laying of APP based membrane as specified thickness and weight. (c) Applying one coat bitumen grade 85/25 @ 1.2 Kg/Sqm. (d) Applying one coat of aluminium paint @ 100ml/Sqm.(MAKE:M/S IWL LTD/M/S STP LTD/M/S TEXSA INDIA LTD)

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing of SSR Part -II complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS square tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip 20 mm wide stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail, bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the styles and rails with suitable sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification drawing of SSR Part-II .

Supply and fix 100 mm size Butt hinges, medium weight cold rolled mild steel as in repairs all as specified and as directed.

S & F 100 mm long aluminium anodised barrel tower bolt of extruded section complete

S & F 100 mm long aluminium alloy handle febricated of extruded section complete

S & F 12mm thick wave free toughened clear glass with stainless steel spider fitting,fish mouth channel in bottom and top as per design with and including provision of all other neccessary fixture and accesaries,complete all as specified and directed.

shri veerabadreshwara enterprises

RASHMI BUILDERS

SRUSHTI CONSTRUCTIONS

S R CONSTRUCTIONS

Teleconcepts (India) Pvt Ltd