8148/2022-23/E8SPL REPAIR TO BLDG NO T-365 T-385 AT AGS, KARU, PROVN OF TILLING OF CENTRAL TRISHUAL CANTEEN ENTRANCE TOI , CONSTRUCTION OF SENTRY POST AT DSTI AND PROVN OF WALL PANELLING AND FALSE CEILING IN DIV SVL CENTRE AT KARU UNDER GE 860 EWS

Amount

Dismantling wall & ceiling boards (fibre, insulation etc ) or insulation boards, slabs, blankets any thick ness including cover fillets all as specified & directed by the Engr-in-Charge.

Dismantling of timber scantling/fillets, rails, posts, rafters, purlings, etc in framed work under 40 sq cm in any position complete all as specified and directed by Engr in Charge

M&L for 2nd class hard wood Plain fillets exc 13 Sqcm but n exc 25 Sqcm in square, rectangular or triangular in section, clean sawn, secured with nails etc complete all as specified and directed by Engr-in-Charge

M&L for 9mm thick pre laminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame works on walls complete all as specified and directed by Engr in Charge

S&F grid false cealing GI system powder coated prelude (main runner sec 32x24x0.30x3600mm), cross tee 25x24x0.30x1200mm, walll angle 24x24x0.40x3000mm and including providing and fixing 9mm thick non asbestor cement fiber designer of size 595x595 mm fixed in cealing frame work), complete all as specified and directed by Engr-in-Charge

Taking down of chowkhats with shutter (without taking of shutter from frame) including iron Mongries etc exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed by Engr in Charge.

Taking down, refixing in same opening, resecuring or easing & adjusting, without taking down shutters of any description exc 1 sqm and n. exc 2 sqm removing of unserviceable complete all as specified and directed by Engr-in-Charge

S&F of second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engr in Charge

S&F 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr in Charge

S&F of 300mm length aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixed clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed by Engr in Charge

Supply and fix 125 mm size medium weight cold rolled mild steel butt hinges complete all as specified and as directed by the Engineer-in-Charge

S&F of 150mm long, aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr in Charge

S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised all as directed by the Engr-in-Charge.

Taking down window shutter including iron mongries etc n exc 1.5 sq. m each complete all as specified and directed by Engr in Charge.

S&F of 30mm thick 2nd class hard wood (shisham) glaze and skelton shutters, open rebated and prepared to receive glass gauge etc divided into suqares with plain chamfered or rounded, mittered edges of framing plain, chamfered or rounded complete all as specified and directed by Engr in Charge

S&F butt hinges of size 75mm cold rolled mild steel, and fixed complete all as specified and directed.

S&F 100mm Aluminium handles, cast type, anodised complete all as specified and directed

S&F 100mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed

M&L for two coat of synthetic enamel (ordinary tint each coat) over a coat priming with pink primer on new or previously untreated wooden surfacecomplete all as specified and directed by Engr in Charge

M&L for reparing servecing of steel windows area n. exc 1.5 Sqm each with greasing, oiling securing with smooth operation including replacement of any damage fitting (handle,hinges,towerbolt,rails & screws etc) and welding work if required complete all as specified and directed by Engr in Charge

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engr-in- Charge

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified

S&F of 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-Charge

S&F of galvanised, corrugated mild steel sheeting 0.50 mm thick with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws with rubber washers with grade of zinc coating 275 complete all as specified and directed by Engr in Charge

S&F of 0.50mm thick plain mild steel sheeting in ridges, hips, valley gutters,drip and straight flashings (length and girth as fixed) fixed with L-type or J-type or cranked hook bolts in lieu of screws with rubber washers with grade of zinc coating 275 complete all as specified and directed by Engr in Charge

M & L for two coat of synthetic enamel paint of approved tint on steel and iron surfaces of any description over 10 cm width or girth not otherwise described including preparing new zinc(or galvanised) surfaces to receive painting by coating with mordant solution incl washing and cleaning, etc. over a coat of red oxide complete all as specified and directed.

M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified & directed by the Engr-in-Charge.

Dismantling boarding, any description, fixed in any position complete all as specified and directed by Engr in Charge

S&F laminated flooring 8mm thick of any coloured manufactured by Direct pressure laminated (DPL) wherein the empty abrasive aluminium oxide overlay alongwith metamine impregnated decorated film is directly fused with the back with flooring locking profile in designed with double click locking system on the length and single locking width alongwith desire locking strength complete all as specified and directed by Engr in Charge

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft and loose soil complete all as specified and directed by Engr in Charge

M&L for hardcore of broken stone or boulders of gauge exc 63mm but n exc 100mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed by Engr in Charge

M&L for 75mm thick Cement concrete type C- 2, 1:3:6 (40mm graded crushed stone aggregate) in sub base of floor complete all as specified and directed by Engr in Charge

M & L coloured chequred cement concrete tiles 30 cm x 30cm x 25mm thick set jointed and pointed in neat cement slurry in floors ,with gray cement and pigments over and including screed bed 20mm in cement mortar 1:6 all as directed by the Engr-in-Charge

M&L for providing cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in kerbs or mud stops, rounded or chamfered on edges of chequred tiles complete all as specified and directed.

M&L for removing excavated material (soils) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc complete and removing all retrieved materials to MES stores for segregation of serviceable /Unserviceable fitting&fixture and also making good disturbed surfaces of wall, floors etc complete all asspecified and as directed by the Engineer-in-Charge.

Material and labour for point wiring with 1.5 Sqmm copper conductor (Multi-standard) FRLS PVC insulated and unsheathed electric cable 1100 volts in and including PVC casing and capping of 25 mm and above (as per conductor run )with all fittings/ accessories and including PVC insulated and unsheathed electric cable 1100 volts1.5 Sqmm ( multi-stranded) copper conductor single core( Green co lour) cable as continuous earth wire connected to common earth dolly including 50 mm deep box made of 2nd class hard board of required size and shape etc covered with 3 mm thick plastic laminated sheet ( Make Hylum) for one light point independent controlled by one, one way switch complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 38 here-in-before, but for one 3 pin socket outlet 5 Amp on same board complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 38 here-in-before , but for one 3 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 38 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing switch piano flush button single pole one way 5 Amps complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing socket outlet multipurpose 2 pin and 3 pin, 5 Amp, flush type complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing switch socket combination multi purpose 2 in 1, 3 pin 5 Amp and 15 Amp, flush type complete all as specified and as directed by Engr-in-charge.Make- Cona/ SSK /Kinjal

Supply and fixing angular lamp holder, metal cased body of brass with back plate with 09 watt LED Bulb for batten fittings, including Plastic square box of required size complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge.Make-Anchor

Supply and fixing LED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling 6500K including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore (7.5 m long) including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR 2009 Part-I and connecting to CBDB’s as specified or indicated including testing on completion.

Supply and fixing sheet Metal enclosure double shutter type for DB’s 240 Volts Single Pole and Neutral 8 way with 200 Amps rated bus bar complete including wooden board of required size duly painted with matching colour paint acomplete all as specified and as directed by the Engr-in-Charge.

Supply and fixing SPN 40 to 63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning.

Supply and fixing SP 5 to 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning.

Surface dressing n.exc 15 cm deep in soft /loose soil complete all as specified and directed

Excavation in trenches n.exc 1.5M wide and n.exc 1.5M depth and n.exc 10 Sqm on plan and getting out in any kind of soil complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 ( Nominalmix) using 40 mm graded crushed stone aggregate as in foundation filling and similar work complete all as specified.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete etc complete all as specified.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished square,flat, rectangular or polygonal surfaces of concrete complete all as specified

M&L for formwork to sides of concrete roof beam, LBs sides and soffits (if any) of similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified

M&L for formwork to soffits of suspedded slabs such as roof slabs, floor slabs landings and similar work ,vertical or to batter for rough finished flat surfaces of concrete complete all as specified.

M&L for rough finished formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed by Engr in Charge

M&L TMT bars 10mm dia and over in reinforcement cut to length bent to shape required incl hooking ends and binding with MS wire (annealed) not less than 0.9mm dia all as directed and specified.

M&L TMT bars 6 to 8mm dia and over in reinforcement cut to length bent to shape required incl hooking ends and binding with MS wire (annealed) not less than 0.9mm dia all as directed and specified.

TMT bars for reinforcement 5mm to 10mm dia as in stirrups/spacers/binders etc. cut to length bent to shape required including bending cranking and hooking ends and binding with including MS wire not less than 0.9mm(annealed) dia complete all as specified.

M & L for providing RCC nominal mixType B1 1:2:4 (20mm graded crushed stone aggregate) in foundations, including rafts,footings, foundation beams, plinth beams, bases of columns and similar work complete all as specified and as directed.

M & L for providing RCC nominal mixType B1 1:2:4 (20mm graded crushed stone aggregate) in columns, pillars, piers, post and struts etc complete all as specified and as directed.

M & L for providing RCC nominal mixType B1 1:2:4 (20mm graded crushed stone aggregate) in Beams, cantilevers,and lintels and chajja etc complete all as specified and as directed.

M & L for providing RCC nominal mixType B1 1:2:4 (20mm graded crushed stone aggregate) in Slab supported in walls beams and columns in roof ,Landing, balconies, deck slabs and in shelves and similar work complete all as specified and as directed.

Returning filling in incl spreading leveling, watering, and well, ramming in layer nexc 25 cm in layers complete all as specified.

M & L Precast cement concrete block masonry type C1 1:3:6 (20mm graded crushed stone aggregate) with solid blocks, exc. 10cm in width and, setting in cement mortar 1:6 complete all as Specified.

M&L for Rendering 10mm thick in cement mortar 1:6 on PCC block walling or concrete surfaces, finished even and smooth without using extra cement complete.

M&L for Rendering 15mm thick, in cement mortar 1:4 on PCC block walling or concrete surfaces and finished even and fair without using extra cement complete.

M&L for Rendering 5mm thick in cement mortar 1:3 on ceiling surface, finished even and smooth without using extra cement complete.

M&L for 4 mm thick glass panes ordinary quality and glazing with oil putty fixed with wooden beads n exc 0.5sqm in each pane complete all as specified and directed

M&L for Cement Concrete type C-2, 1:3:6 (40 mm graded crushed stone aggregate) - 100mm thick as Sub base complete all as specified and directed.

M&L for coloured jointless Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified and directed by Engr -in-Charge

M&L for Glazed ceramic tiles450x300x7mm thick coloured/shaded as in vertical surfaces such as skirting dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the surface

M&L for preparation of new plastered surfaces and apply two coats of cement base paint complete all as specified and directed.

M&L for preparation surface and apply two coats of oil bond distemper over a coat of primer on newly plastered surface complete all as specified and directed.

M&L for preparation surface and apply three coats of white wash on newly plastered surface complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in plinth protection complete all as specified and directed

S&F vitreous china squatting Pan of Orrisa pattern 580 mm x 440 mm with integral foot rest white with CI "P" or "S" trap front or back inlet including PCC bedding complete all as specified and directed

S & F of 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed..

S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed.

S&F PVC floor trap 75 mm bore with grating setting and jointing with solvent cement complete all as specified and directed

M&L for PVC (SWR) 110 mm gully trap setting joining with solvent cement complete all as specified and directed.

S&F 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F of 16mm bore 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc

S&F of 15mm bib taps, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed

S&F of coloured PVC designer Modular wall clading 5 to 6 mm thick with air gap between installed with U shapped GI Channel with end joints on edges (Designed, colour patterns as per directed by GE). The frame work will be fixed to wall using aluminium screws complete all as specified and as directed by Engr-in-Charge.

S & F of GI frame work for seamless ceiling comprising of GI perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mmand web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre,intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified.

M & L Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fiber 6mm thick for fixing in 600 mm x 600 mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified.

S&F of 12 mm thick toughned frameless glass door complete with hardware accessories, fixing Sqm arrangement handle, floor spring, pivote quality arrangment complete all as specified by the manufactured and directed by the GE.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with stranded conductgor PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm 2 core nominal cross section in service connections.

SHANTI ENTERPRISES

M/S BHAT ENGINEERS

PARIDHI CONSTRUCTION

M/s Aman Enterprises

M/S LOBZANG NORBOO

KAMLA CONSTRUCTION COMPANY

Takshos Enterprises

M/S TRADE LINK