SPECIAL REPAIRS TO BUILDING NO Y AT CHANAKYA BAGH, CHANKYAPURI IN THE NAVY AREA UNDER GE NEW DELHI

Amount

Demoltion of brick work or stone/boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Dismantling floor or wall tiling including cement mortar bedding (but not backing) and removing rubbish outside MOD land complete all as specified and directed.

Demolittion of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified.

M&L for cement concrete 25mm thick type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in sub base of floors complete in all respect.

M&L for vitrified coloured (any colour) ceramic tiles, double charged, 10 mm thick (square/rectangular) polished area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc set and jointed in neat cement slurry and pointed with white or coloured cement laid over M&L 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified.

M&L 20 mm thick granite (of any type) machine cut as in floors, jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding and polishing laid over and including 20 mm thick screed bedding layer in CM 1:6 complete all as specified.

M&L 20 mm thick granite (of any type) tiles machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 15mm thick rendering or bedding layer of cement mortar 1:4 complete all as specified.

M & L Vitrified Ceramic tiles (Light Shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surfaces such as skirting and dados etc set and jointed in neat cement slurry and pointed with white or coloured cement laid over M&L 15 mm thick rendering in cement mortar 1:6 complete all as specified.

S&F Non skid joint less coloured ceramic tiles 7-8mm thick size 400x400 mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over M&L 20 mm thick screed bed or bedding layer of cement mortar 1:6 and including resin rubber based adhesive as recommended by the manufacturer’s instruction complete .

Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc all as specified

Material and labour for Brick work with sub class 'B' bricks straight or curved on plan exc 6.0 m mean radius built in CM (1:6) complete all as specified and as directed.

Material and labour for Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar (1:6) on brick/concrete surfaces of walls,finished even & smooth surfaces without using extra cement complete all as specified.

Excavation in trenches n.exc.1.5 metre wide and n.exc 1.5 metre depth and getting out in soft/loose soil as in foundation.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in hard/dense soil

M & L for cement concrete type D2, 1:4:8 mix using 40mm graded stone aggregate as in foundation complete all as specified and directed.

M & L for cement concrete type C1, 1:3:6 mix using 20mm graded stone aggregate as in coping including necessary form work all as specified

M&L for glazed ceramic coloured tiles in vertical surfaces such as skirting and dados of size 300x450x7-8 mm thick, set and jointed in neat cement slurry and pointed with white or coloured cement laid over 10mm thick rendering of cement mortar 1:4.

Demolition and breaking up drain pipes of 100 mm (Salt glazed ware, AC / PVC or Reinforced concrete) set in cement mortar or any description especified or directed by Engr in charge

Demolition and breaking up drain pipes of 150 mm (Salt glazed ware, AC / PVC or Reinforced concrete) set in cement mortar or any description especified or directed by Engr in charge

S&F PVC (SWR) pipes single socketed in any length, fixed to walls with clamps 110 mm bore of pipe complete all as specified.

Cutting into existing manholes for connecting new pipes, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement conc 1:2:4 type B-1 smooth finished and reforming benching as required for 150mm bore of pipe.

M&L Concrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in cement conc 1:3:6 type C-2 for 150mm bore of pipe.

PVC (SWR) pipes of 150 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F PVC (SWR) bends any radius 150 mm bore of complete all as specified.

S & F PVC (SWR) junction single, (Single T) 150mm bore equal or unequal with acess door complet all as specified

PVC (SWR) pipes of 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F PVC (SWR) bends any radius 110 mm bore equal or unequal with acess door of complete all as specified.

S & F PVC (SWR) junction single, (Single T) 110mm bore equal or unequal with acess door complet all as specified

PVC (SWR) pipes of 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F factory made PVC internal door frame conforming to the product manufactured by Raj shree of the size 100x45mm with a wall thickness of 5mm, made out of extruded 5mm thick prelam sheet, mitred cut at two corners and jointed with 2 nos. of 150mm long brackets of 15mmx 15mm MS tube. The two vertical door profiles are to be reinforced with 40mmx20mm MS tube of 19 gauge through out the frame. The door frame shall be fixed to the wall using 65/100mm long MS Screws through the frame by using PVC fastners. A minimum of 4nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc. complete as per manufactures specification and directed of Engineer-in-charge.

S&F 35mm thick factory made solid PVC Moulded door shutter, consisting of solid core single leaf flush door of 30mm thickness, lipped with 15mm(5mmx3) thick 30mm width on the other stiles & bottom rails. The inner panel laminated with 2mm thick termite proof and fire resistant moulded PVC sheet with 2,4 or 6 raised panel design in defferent plain and / OR prelam colours on one side after routing the moulded design on flush door & 2mm th plain and/ OR prelam PVC sheet on the other side using rubber adhesive on flush door & solvent cement adhesive on the PVC lipping etc complete as per direction of Engineer -in charge, manufacture,s specification and drawing

S&F aluminium, anoidized barrel tower bolts of extruded section with bright bolts, length of bolt 200mm complete in all respect and all as specified.

S&F aluminium handle cast type, anodised of size 150mm complete in all respect and all as specified.

S&F aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 300mm, bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolts plate and two stapple plate complete inall respect and all as specified.

S&F Butt hinges medium weight galvanised mild steel and fixed, 100mm size of hinges

S& F powder coated aluminium ventilators chowkhat made out of hollow extruded aluminum section 63.50 x 38.10 x 2.00 mm thick & shutter made of section 47.00 x 44.45 x 2.00 mm thick complete with 2 no 75 mm Aluminum Hinge 2 Nos 150 mm long Aluminum anodised tower bolt & Aluminium stay. One no 100mm Aluminum anodised D type alum Handle and 3 mm thickfrosted glass in each shutter of vents. The make of glass Saint Gobain./Modiguard. The rate includes rubber packing/Aluminum beading around glass complete with rubber packing Gasket & glazing clip .

S&F vitreous china white wash hand basin flat back of size 550x400mm ISI marked Ist quality including CI/MS brackets including cutting for and pinning in brackets but including PVC waste pipe, PVC waste coupling complete in all respect as specified.

M & L 32mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S & F 15mm bore dia Stainless steel finish copper alloy pillar tap for wash hand basin with long screwed shanks and fly nuts screwed for iron pipe and fixed complete in all respect as specified and directed by Engr-in-Charge. Make : Jaguar

S&F brass chromium plated health faucet with one metre long flexible pipe and wall hook, fixed complete in position for pedestal pattern WC all as specified and directed.

S & F Vitreous China wash down water closet pan (Pedestal Pattern) and trap (standard pattern) white as approved including connection to drain (or outgoing pipe) and to flushing pipe anti symphonize pipe etc. complete with fixing bolts and MS chromium plated flush pipe, 32mm dia for low level flushing cistern, plastic water closet seat, coloured, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device and jointing complete as fixed in repair.

S&F in repairs china water closet Orissa Pan 580 X440mm long pan Ist quality ISI marked with cast iron 'P' or 'S' trap including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete in all respect as specified (Make: CERA, Hindware, Parryware)

S&F in repairs PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 liters, low level, White with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type and making connections complete including taking down by dismantling the existing unserviceable cistern of any description. Make :- SLIMLINE ( ECONOMY) with front knob of Parryware or equivalent in Hindustan Sanitary ware.

Taking up or down 20mm dia of galvanised Iron steel tubing and connections including, cutting/chasing in wall/floor complete in all respect as specified

S&F 20mm bore dia Mild steel galvanized steel tubing with screwed socket joints, medium grade, together with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors including , screwing and waste and for forged bends on piping as required , cutting through walls, floors and their making good to match with the existing specifications complete

Taking up or down 15mm dia of galvanised Iron steel tubing and connections including, cutting/chasing in wall/floor complete in all respect as specified

S&F 15mm bore dia Mild steel galvanized steel tubing with screwed socket joints, medium grade, together with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors including , screwing and waste and for forged bends on piping as required , cutting through walls, floors and their making good to match with the existing specifications complete

S&F 15 mm dia cast copper alloy chromium plated angle cock with long shank and cup complete in all respect as specified.

S&F in repairs 15 mm dia cast copper alloy fancy type chromium plated stop cock long shank concealed type complete in all respect as specified.

S&F in repairs 15 mm dia brass chromium plated Bib tap fency type chromium plated complete in all respect as specified.

S&F PVC connection 15 mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete in all respect as specified

S&F 20mm bore dia gun matel globe or with iron wheel, screwed both ends for iron pipes fixed complete in all respect as specified

M&L for 20mm dia CP finish brass alloy towel rail, 600mm long complete.

S&F brass chromium plated soap dish complete in all respect as specified and directed.

S&F glass corner shelf 5 mm thick with stainless steel railing and stainless steel fasteners fixed on wall complete all as specified and directed.

Dismantling of concrete by chiselling from RCC members like col, beam, parapet, facia, ceiling etc exposing the reinforcement without disturbing the reinforcement free from rust by sand blasting providing at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding & provision guniting pressure 2.2 to 2.5 Kg/Sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40mm including stripping floating with wooden strippers for proper dimension control necessary form work & scaffolding up to One storey complete. Surface of guniting to be finished fair with 10mm thick plaster in cement mortar 1:4 with water proofing compound @3% by weight of cement, cleaning & removing of waste material etc as directed at site ( Welded mesh & addl reinforcement if required measured and paid separetly) Note: Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosing affected area by green cloth)

S&F Welded steel wire fabric weight n exc 4 Kg /sqm

M&L Polymer modified cementious bonding coat , prepared and applied on the concrete/ masonry surfaces with I part of Styrene Butadiene Rubber latex emulsion (SBR latex) with 4 parts of water and 6 parts of cement by weight.Coverage of SBR latex-0.25Ltr / sqm for one coat.

M&L 15 mm thick polymer modified plaster in CM (1:4) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement all as specified. ( SBR latex shall be measured and paid separately)

S&F GI wire netting 0.9mm dia and 12mm mesh lathing to wood or metal studding, joist etc in walls, ceiling, stachions, beams etc incl all laps cutting and waste complete all as directed by EIC

Supply only Styrene Butadiene Rubber latex emulsion.

Dismantling boarding, any description, fixed in any position with screws

M&L for 12 mm thick Gypsum board as in ceiling with counter sunk screws on and incl GI channels frame work of standard section as per manufacturer's instructions, fixed @ 1.2 m in one direction and 45 cm in center to center in other direction with necessary fixing arrangement at their junction point at desired heights below roof slab and incl two coats of plastic emulsion paint over a coat of primer on exposed surfaces. ( the frame work shall be fixed with the help of GI suspenders of suitable size with dash fasteners and along wall making good disturbed surfaces smoothening the gypsum board ,POP linning at joints panning as required complete as specified and directed .

S&F to true horizontal level 600x600mm grid panels false ceiling manufactured by M/S Armstrong World Industries using hot dipped galvanised steel sections exposed surface with precoated capping, Main Tee of size 24x32 at every 12mm c/c maxi, rotary stitched cross Tee of size 24x27 mm at every 1200 mm c/c and wall angle of size 19x19 mm fixed to perimeter wall. The complete grid is to be suspended at every 600 mm c/c in both directions by using 2 mm dia pre straightened GI wire at every 1200 mm interval at the main Tee using fine finished tagular edge and M&L for mineral fibre ceiling boards of size 600x600x16mm fixed with staples on snap grid complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm & nexc 4.0 Sqm each (without taking off the shutter from the frame) including all builders hardwares and dismantlling of hold fast PCC complete in all respect as specified

S&F 12mm thick toughned frosted/smoked glass door swing both side with self locking vertical spring fitted with necessary fixing arrangement with wall and stainless steel pivot complete in all respect as specified & directed. Make : Modiguard or Saint Gobain.

S&F Floor spring suitable for glass door complete in all respect as specified and directed by Engr-in-Charge.

S & F in repair floor spring suitable for glass door complete in all respect as specified and directed by Engr-in-Charge.

S&F locking arrangement for glass door both side including necessary cutting in toughned frosted glass and floor complete in all respect as specified

S&F stainless steel door handle 450 mm long for toughned glass door including necessary holes in glass complete in all respect as specified & directed

M&L for providing precast cement concrete slab,shelves, cover slab and similar articles with plain faces using type B1,1:2:4 ( 20 mm graded aggregate) set in cement mortar 1:4 complete all as specified and directed.

M&L for mild steel TMT bars10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L preparation of old wood or wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint.

M&L for preparation of old decorated plastered surfaces of walls and preparation of surfaces with the application of white cement base wall care putty (as specified in clause 15.19 of SSR Part-I) complete and application of two coats of plastic emulsion paint over one coat of primer complete all as specified & directed.

M&L for preparation of old decorated surfaces of ceiling and preparation of surfaces with the application of white cement base wall care putty (as specified in clause 15.19 of SSR Part-I) complete and application of two coats of oil bound distemper over one coat of primer complete all as specified & directed.

M & L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of primer and M&L one coat of wall care putty on walls complete in all respect as specified.

M&L preparation of new plastered surfaces of wall and applying two coats of weather proof, water based, modified acrylic exterior wall paint with silicon additives (with anti fungus and anti algae properties) over a coat of solvent based primer complete.

M&L for complete removal of existing treatment of wall and and preparation of surfaces with the application of white cement base wall care putty (as specified in clause 15.19 of SSR Part-I) complete and applying two coats of weather proof, water based, modified acrylic exterior wall paint with silicon additives (with anti fungus and anti algae properties) over a coat of solvent based primer complete.

Dismantling water tanks exc 500 ltr and n.exc 1000 ltr and removal from site.

S&F 1000 litres capacity Rotational moulded polyethylene five layered water storage tanks (Cylindrical vertical with threaded top cover) white or blue in colour, pure anti bacterial film inside of tank, hoisted & fixed in position including Tank Nipple and with union (Two Nos each) , fittings complete . Make of tank :- Sintex/Rotex/Polywell

S&F in repairs ball valve of PVC (Make Symet/Prayag) complete with aluminium rod with polyster ball for 20 mm dia iron pipe complete all as specified.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

S&F 6.00 mm thick mild steel, plain, black sheet in water tank platform and similar work ,cut to size, holes punched; including welding to steel framing with including bending or turning up, mitred angles, etc. as required

Prepration new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide

Dismantling of brick tiles single layer on roofs

Demolition of mud in roofs,any thickness

(a) M&L cleaning the surface, remoive dust dirt, loose particles and unsound substrate and providing 20mm thick cement screed (1:4) mixed with Dr Fixit STP tonic liquid 200 gram/Bag over Dr Fixit bonding coat MPB .(b) Applying primer coat with solvent based bitumen primer @ 3.50 ltr/XSqm.(c) Align Dr Fixit/STP torch shield water proofing 3mm thick membrance using gas burner to heat substrate, pressing firmly from lower end to upper end with 100mm over lap.(d) Heat both overlap with round trowel to seal over lap excess compound smoothened,pressed into seam using hot trowel.(e) Seal edges well into grooves & protect with CM 1:2.

M&L Providing cement concrete type B-I,1:2:4(20mm graded agg) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028 , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.

M & L pre cast PCC plain tile of size 300x300x20mm machine made laid over & & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed pointed in CM 1:3 mixed with 5% crude oil by weight of cement.

M&L providing 100 mm thick cement concrete type C-2,1:3:6 (40mm graded agg) in sub base of floors, pavings etc.

M&L for 25mm thick Fiber reinforced heavy duty PU coated cement concrete tile of any pattern decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed 1:6, laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete inall respect and all as specified. Make -Ultra/coral

Taking down old fitting of any cap from surface, wall, floor complete all as specified and directed.

S&F ceiling rose 3 terminal / PVC/ Polycarbonate, insulated body all as specified.

S&F in replacement of round surface/ceiling mounted LED luminaire 15 watts dia cast aluminium luminiries in power coated white finish with drop down PC diffuser with optimized heat shrinkable for efficient heat dissipation and sepetate replacement eletronic driver connecting up with three core twisted flexible copper conductor cable of suitable size all as specified. Make: Havells cat part No LHEBMIP5PZ1W015 or Equivalent to CG/Philips

S & F LED batten for LED tube light 1x 22 watt (4Ft) 220 V, AC single side surface/ cilling mounted, G13 T8 lamp , with driver, complete all as specified and directed by Engr-in-charge conforming to cat part No LHFYBYPNIA1W022 of Make Havells or equivalent in Philips/CG .

S & F LED ratro fit polycarbonate tube light 22 watt single side connection suitable for T8 Tubelight with G13 lamp lamp holder to give glare free light complete all as specified and directed by Engr-in-charge of Make Havells cat part No LHLDCLXEUL83020 or equivalent in Philips/CG .

S&F Surface mounted 2x2 LED luminirais 28 watt which provide soft light and glare free symmentrical illumination fixed in ceilling all as specified and directed by Engr-in-charge conforming to cat part No LHEWDRP6PK1WO28 of Make Havells or equivalent to philips/ CG

S&F Combine cover plate Moduler suitable for 12 moduler complete all as specified conforming to cat part No ACAPNCWV12 , Crabtree of make Havells or Equivalent in Anchor/Roma

S&F Combine cover plate Moduler suitable for 8 moduler complete all as specified conforming to cat part No ACAPNCWV08 , Crabtree of make Havells or Equivalent in Anchor/Roma

S&F Switch Modular 6 Amp ,240 V One way all as specified conforming to cat part No ACASXXWO61 , Crabtree of make Havells or Equivalent in Anchor/Roma

S&F Four step enegry saving fan regulator Modular ,240 V all as specified conforming to cat part No ACARFXW004 , Crabtree of make Havells or Equivalent in Anchor/Roma

S&F Socket Modular 6 Amp, 5 pin , shutterd type 240 V One way all as specified conforming to cat part NoACAKPXWO65, Crabtree of make Havells or Equivalent in Anchor/Roma

sony engineering works

BEHAL TRADERS