Associated Piping Electrical Civil works for Plant and Non Plant Roads

Amount

ELECTRICAL WORKS

CABLES

SUPPLY OF MV/LV POWER CABLES, CONTROL CABLES,

Supply of 1.1 kV Grade, Al conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cables as per the data sheet of cables:

Supply of 1.1 kV Grade, 3.5C X 50 sq mm LV Power Cable Al conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cable as per the data sheet of cables:

Supply of 1.1 kV Grade, 3.5C X 95 sq mm LV Power Cable Al conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cable as per the data sheet of cables:

Supply of 1.1 kV Grade, 3.5C X 150 sq mm LV Power Cable Al conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cable as per the data sheet of cables:

Supply of 1.1 kV Grade, 3C X 300 sq mm LV Power Cable Al conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cable as per the data sheet of cables:

Supply of 1.1 kV Grade, 3.5C X 300 sq mm LV Power Cable Al conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cable as per the data sheet of cables:

Supply of 1.1 kV Grade, CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cables / control cables as per the data sheet of cables :

Supply of 1.1 kV Grade, 3C x 2.5 sq mm Control Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed control cable as per the attached data sheet of cables

Supply of 1.1 kV Grade, 7C x 2.5 sq mm Control Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed control cable as per the attached data sheet of cables

Supply of 1.1 kV Grade, 14C x 2.5 sq mm Control Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed control cable as per the attached data sheet of cables

Supply of 1.1 kV Grade, 4C x 6 sq mm LV Power Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cable as per the attached data sheet of cables

Supply of 1.1 kV Grade, 2C x 10 sq mm LV Power Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cable as per the attached data sheet of cables

Supply of 1.1 kV Grade, 4C x 10 sq mm LV Power Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cable as per the attached data sheet of cables

Supply of 1.1 kV Grade, 4C x 16 sq mm LV Power Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cable as per the attached data sheet of cables

Supply of 1.1 kV Grade, 3C x 300 sq mm LV Power Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cable as per the attached data sheet of cables

LAYING / INSTALLATION, TESTING AND COMMISSIONING OF MV/LV POWER CABLES, CONTROL CABLES

Laying / Installation, Testing and Commissioning of 1.1 kV Grade, Al conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cables as per the data sheet of cables:

Laying / Installation, Testing and Commissioning of 1.1 kV Grade, 3.5C X 50 sq mm LV Power Cable Al conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cable as per the data sheet of cables. Laying / Installation in ready trench/trays/Racks, underground/buried, supported on structures, through pipe sleeves, clamping to column wall or structure using GI spacers and saddles (at an interval of 300 mm), Installation & supply of anodise Aluminium / Stainless steel tags for overhead & buried cables respectively. Installation & supply of G.I saddles & GI Clamps, clamping of cables on trays & necessary hardwares

Laying / Installation, Testing and Commissioning of 1.1 kV Grade, 3.5C X 95 sq mm LV Power Cable Al conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cable as per the data sheet of cables. Laying / Installation in ready trench/trays/Racks, underground/buried, supported on structures, through pipe sleeves, clamping to column wall or structure using GI spacers and saddles (at an interval of 300 mm), Installation & supply of anodise Aluminium / Stainless steel tags for overhead & buried cables respectively. Installation & supply of G.I saddles & GI Clamps, clamping of cables on trays & necessary hardwares

Laying / Installation, Testing and Commissioning of 1.1 kV Grade, 3.5C X 150 sq mm LV Power Cable Al conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cable as per the data sheet of cables. Laying / Installation in ready trench/trays/Racks, underground/buried, supported on structures, through pipe sleeves, clamping to column wall or structure using GI spacers and saddles (at an interval of 300 mm), Installation & supply of anodise Aluminium / Stainless steel tags for overhead & buried cables respectively. Installation & supply of G.I saddles & GI Clamps, clamping of cables on trays & necessary hardwares

Laying / Installation, Testing and Commissioning of 1.1 kV Grade, 3C X 300 sq mm LV Power Cable Al conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cable as per the data sheet of cables. Laying / Installation in ready trench/trays/Racks, underground/buried, supported on structures, through pipe sleeves, clamping to column wall or structure using GI spacers and saddles (at an interval of 300 mm), Installation & supply of anodise Aluminium / Stainless steel tags for overhead & buried cables respectively. Installation & supply of G.I saddles & GI Clamps, clamping of cables on trays & necessary hardwares

Laying / Installation, Testing and Commissioning of 1.1 kV Grade, 3.5C X 300 sq mm LV Power Cable Al conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cable as per the data sheet of cables. Laying / Installation in ready trench/trays/Racks, underground/buried, supported on structures, through pipe sleeves, clamping to column wall or structure using GI spacers and saddles (at an interval of 300 mm), Installation & supply of anodise Aluminium / Stainless steel tags for overhead & buried cables respectively. Installation & supply of G.I saddles & GI Clamps, clamping of cables on trays & necessary hardwares

Laying / Installation, Testing and Commissioning of 1.1 kV Grade, CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cables / control cables

Laying / Installation, Testing and Commissioning of 1.1 kV Grade, 3C x 2.5 sq mm Control Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed control cable as per the attached data sheet of cables. Laying / Installation in ready trench/trays/Racks, underground/buried, supported on structures, through pipe sleeves, clamping to column wall or structure using GI spacers and saddles (at an interval of 300 mm), Installation & supply of anodise Aluminium / Stainless steel tags for overhead & buried cables respectively. Installation & supply of G.I saddles & GI Clamps, clamping of cables on trays & necessary hardwares

Laying / Installation, Testing and Commissioning of 1.1 kV Grade, 7C x 2.5 sq mm Control Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed control cable as per the attached data sheet of cables. Laying / Installation in ready trench/trays/Racks, underground/buried, supported on structures, through pipe sleeves, clamping to column wall or structure using GI spacers and saddles (at an interval of 300 mm), Installation & supply of anodise Aluminium / Stainless steel tags for overhead & buried cables respectively. Installation & supply of G.I saddles & GI Clamps, clamping of cables on trays & necessary hardwares

Laying / Installation, Testing and Commissioning of 1.1 kV Grade, 14C x 2.5 sq mm Control Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed control cable as per the attached data sheet of cables. Laying / Installation in ready trench/trays/Racks, underground/buried, supported on structures, through pipe sleeves, clamping to column wall or structure using GI spacers and saddles (at an interval of 300 mm), Installation & supply of anodise Aluminium / Stainless steel tags for overhead & buried cables respectively. Installation & supply of G.I saddles & GI Clamps, clamping of cables on trays & necessary hardwares

Laying / Installation, Testing and Commissioning of 1.1 kV Grade, 4C x 6 sq mm LV Power Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cable as per the attached data sheet of cables. Laying / Installation in ready trench/trays/Racks, underground/buried, supported on structures, through pipe sleeves, clamping to column wall or structure using GI spacers and saddles (at an interval of 300 mm), Installation & supply of anodise Aluminium / Stainless steel tags for overhead & buried cables respectively. Installation & supply of G.I saddles & GI Clamps, clamping of cables on trays & necessary hardwares

Laying / Installation, Testing and Commissioning of 1.1 kV Grade, 2C x 10 sq mm LV Power Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cable as per the attached data sheet of cables. Laying / Installation in ready trench/trays/Racks, underground/buried, supported on structures, through pipe sleeves, clamping to column wall or structure using GI spacers and saddles (at an interval of 300 mm), Installation & supply of anodise Aluminium / Stainless steel tags for overhead & buried cables respectively. Installation & supply of G.I saddles & GI Clamps, clamping of cables on trays & necessary hardwares

Laying / Installation, Testing and Commissioning of 1.1 kV Grade, 4C x 10 sq mm LV Power Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cable as per the attached data sheet of cables. Laying / Installation in ready trench/trays/Racks, underground/buried, supported on structures, through pipe sleeves, clamping to column wall or structure using GI spacers and saddles (at an interval of 300 mm), Installation & supply of anodise Aluminium / Stainless steel tags for overhead & buried cables respectively. Installation & supply of G.I saddles & GI Clamps, clamping of cables on trays & necessary hardwares

Laying / Installation, Testing and Commissioning of 1.1 kV Grade, 4C x 16 sq mm LV Power Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cables as per the attached data sheet of cables. Laying / Installation in ready trench/trays/Racks, underground/buried, supported on structures, through pipe sleeves, clamping to column wall or structure using GI spacers and saddles (at an interval of 300 mm), Installation & supply of anodise Aluminium / Stainless steel tags for overhead & buried cables respectively. Installation & supply of G.I saddles & GI Clamps, clamping of cables on trays & necessary hardwares

Laying / Installation, Testing and Commissioning of 1.1 kV Grade, 3C x 300 sq mm LV Power Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cables as per the attached data sheet of cables. Laying / Installation in ready trench/trays/Racks, underground/buried, supported on structures, through pipe sleeves, clamping to column wall or structure using GI spacers and saddles (at an interval of 300 mm), Installation & supply of anodise Aluminium / Stainless steel tags for overhead & buried cables respectively. Installation & supply of G.I saddles & GI Clamps, clamping of cables on trays & necessary hardwares

MV / LV CABLES END TERMINATION INCLUDING SUPPLY OF LUGS

Termination including supply of crimping type, heavy duty, long barrel type Alluminium lugs for 1.1 kV Grade, Al conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cables

Termination including supply of crimping type, heavy duty, long barrel type Alluminium lugs for 1.1 kV Grade, 3.5C x 50 Sqmm LV Power Cable. This includes cutting stripping of cable insulation, fixing of cable gland, crimping the lug on to the conductor, clamping of the cable cores, supply, fixing & marking with wire number ferrules etc. All necessary consumables and GI hardware, supply & installation of PVC shrouds for outdoor terminations

Termination including supply of of crimping type, heavy duty, long barrel type Alluminium lugs for 1.1 kV Grade, 3.5C x 95 Sqmm LV Power Cable. This includes cutting stripping of cable insulation, fixing of cable gland, crimping the lug on to the conductor, clamping of the cable cores, supply, fixing & marking with wire number ferrules etc. All necessary consumables and GI hardware, supply & installation of PVC shrouds for outdoor terminations

Termination including supply of crimping type, heavy duty, long barrel type Alluminium lugs for 1.1 kV Grade, 3.5C x 150 Sqmm LV Power Cable. This includes cutting stripping of cable insulation, fixing of cable gland, crimping the lug on to the conductor, clamping of the cable cores, supply, fixing & marking with wire number ferrules etc. All necessary consumables and GI hardware, supply & installation of PVC shrouds for outdoor terminations

Termination including supply of crimping type, heavy duty, long barrel type Alluminium lugs for 1.1 kV Grade, 3C x 300 Sqmm LV Power Cable. This includes cutting stripping of cable insulation, fixing of cable gland, crimping the lug on to the conductor, clamping of the cable cores, supply, fixing & marking with wire number ferrules etc. All necessary consumables and GI hardware, supply & installation of PVC shrouds for outdoor terminations

Termination including supply of crimping type, heavy duty, long barrel type Alluminium lugs for 1.1 kV Grade, 3.5C x 300 Sqmm LV Power Cable. This includes cutting stripping of cable insulation, fixing of cable gland, crimping the lug on to the conductor, clamping of the cable cores, supply, fixing & marking with wire number ferrules etc. All necessary consumables and GI hardware, supply & installation of PVC shrouds for outdoor terminations

Termination including supply of crimping type, heavy duty, long barrel type Copper lugs for 1.1 kV Grade, Cu conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cables / control cables

Termination including supply of crimping type, heavy duty, long barrel type Copper lugs for 1.1 kV Grade, 3C x 2.5 sq mm Control Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed control cables. This includes cutting stripping of cable insulation, fixing of cable gland, crimping the lug on to the conductor, clamping of the cable cores, supply, fixing & marking with wire number ferrules etc. All necessary consumables and GI hardware, supply & installation of PVC shrouds for outdoor terminations

Termination including supply of crimping type, heavy duty, long barrel type Copper lugs for 1.1 kV Grade, 7C x 2.5 sq mm Control Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed control cables. This includes cutting stripping of cable insulation, fixing of cable gland, crimping the lug on to the conductor, clamping of the cable cores, supply, fixing & marking with wire number ferrules etc. All necessary consumables and GI hardware, supply & installation of PVC shrouds for outdoor terminations

Termination including supply of crimping type, heavy duty, long barrel type Copper lugs for 1.1 kV Grade, 14C x 2.5 sq mm Control Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed control cables. This includes cutting stripping of cable insulation, fixing of cable gland, crimping the lug on to the conductor, clamping of the cable cores, supply, fixing & marking with wire number ferrules etc. All necessary consumables and GI hardware, supply & installation of PVC shrouds for outdoor terminations

Termination including supply of crimping type, heavy duty, long barrel type Copper lugs for 1.1 kV Grade, 4C x 6 sq mm LV Power Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cables. This includes cutting stripping of cable insulation, fixing of cable gland, crimping the lug on to the conductor, clamping of the cable cores, supply, fixing & marking with wire number ferrules etc. All necessary consumables and GI hardware, supply & installation of PVC shrouds for outdoor terminations

Termination including supply of crimping type, heavy duty, long barrel type Copper lugs for 1.1 kV Grade, 2C x 10 sq mm LV Power Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cables. This includes cutting stripping of cable insulation, fixing of cable gland, crimping the lug on to the conductor, clamping of the cable cores, supply, fixing & marking with wire number ferrules etc. All necessary consumables and GI hardware, supply & installation of PVC shrouds for outdoor terminations

Termination including supply of crimping type, heavy duty, long barrel type Copper lugs for 1.1 kV Grade, 4C x 10 sq mm LV Power Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cables. This includes cutting stripping of cable insulation, fixing of cable gland, crimping the lug on to the conductor, clamping of the cable cores, supply, fixing & marking with wire number ferrules etc. All necessary consumables and GI hardware, supply & installation of PVC shrouds for outdoor terminations

Termination including supply of crimping type, heavy duty, long barrel type Copper lugs for 1.1 kV Grade, 4C x 16 sq mm LV Power Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cables. This includes cutting stripping of cable insulation, fixing of cable gland, crimping the lug on to the conductor, clamping of the cable cores, supply, fixing & marking with wire number ferrules etc. All necessary consumables and GI hardware, supply & installation of PVC shrouds for outdoor terminations

Termination including supply of crimping type, heavy duty, long barrel type Copper lugs for 1.1 kV Grade, 3C x 300 sq mm LV Power Cable CU conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cables. This includes cutting stripping of cable insulation, fixing of cable gland, crimping the lug on to the conductor, clamping of the cable cores, supply, fixing & marking with wire number ferrules etc. All necessary consumables and GI hardware, supply & installation of PVC shrouds for outdoor terminations

Making of straight through joints for MV/LV Power and Control Cable including supply of straight through jointing kit

Making of straight through joints for LV Power Cable including supply of straight through jointing kit

Making of straight through joints (indoor or outdoor) including supply of straight through jointing kit, 1.1kV Grade, 3.5C X 50 sq mm, Al conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cables. This includes supply & installation of all necessary consumables, GI hardwares.

Making of straight through joints (indoor or outdoor) including supply of straight through jointing kit, 1.1kV Grade, 3.5C X 95 sq mm, Al conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cables. This includes supply & installation of all necessary consumables, GI hardwares.

Making of straight through joints (indoor or outdoor) including supply of straight through jointing kit, 1.1kV Grade, 3.5C X 150 sq mm, Al conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cables. This includes supply & installation of all necessary consumables, GI hardwares.

Making of straight through joints (indoor or outdoor) including supply of straight through jointing kit, 1.1kV Grade, 3C X 300 sq mm, Al conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cables. This includes supply & installation of all necessary consumables, GI hardwares.

Making of straight through joints (indoor or outdoor) including supply of straight through jointing kit, 1.1kV Grade, 3.5C X 300 sq mm, Al conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cables. This includes supply & installation of all necessary consumables, GI hardwares.

SUPPLY AND INSTALLATION OF CABLE MARKERS

Supply and installation of cable markers Supply and installation of cable markers for buried HV/MV cable at the interval of 30M, at every bend & at every cable joint location, supply of associated materials including engraving "BURIED ELECTRIC CABLES HT/LT" complete with support and foundation, painting as per approved drawing, specification of this tender and directions of Engineer-in-charge. This includes supply & installation of all necessary consumables, GI hardwares.

SUPPLY OF WEATHER PROOF AND FLAMEPROOF CABLE GLANDS

SUPPLY OF WEATHE RPROOF AND FLAMEPROOF CABLE GLANDS for 1.1kV Grade, Al conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cables

Supply of Weather Proof Cable Gland for 1.1kV Grade 3.5C x 50 Sqmm LV Power Cable Double compression Nickel plated brass cable gland suitable for Aluminium conductor, Armoured Power cables, 1.1kV Grade 3.5C x 50 Sqmm LV Power Cable

Supply of Weather Proof Cable Gland for 1.1kV Grade 3.5C x 95 Sqmm LV Power Cable Double compression Nickel plated brass cable gland suitable for Aluminium conductor, Armoured Power cables, 1.1kV Grade 3.5C x 95 Sqmm LV Power Cable

Supply of Weather Proof Cable Gland for 1.1kV Grade 3.5C x 150 Sqmm LV Power Cable Double compression Nickel plated brass cable gland suitable for Aluminium conductor, Armoured Power cables, 1.1kV Grade 3.5C x 150 Sqmm LV Power Cable

Supply of Weather Proof Cable Gland for 1.1kV Grade 3C x 300 Sqmm LV Power Cable Double compression Nickel plated brass cable gland suitable for Aluminium conductor, Armoured Power cables, 1.1kV Grade 3C x 300 Sqmm LV Power Cable

Supply of Weather Proof Cable Gland for 1.1kV Grade 3.5C x 300 Sqmm LV Power Cable Double compression Nickel plated brass cable gland suitable for Aluminium conductor, Armoured Power cables, 1.1kV Grade 3.5C x 300 Sqmm LV Power Cable

Supply of Flame Proof Cable Gland for 1.1kV Grade 3.5C x 50 Sqmm LV Power Cable Double compression Nickel plated brass cable gland suitable for Aluminium conductor, Armoured Power cables, 1.1kV Grade 3.5C x 50 Sqmm LV Power Cable

Supply of Flame Proof Cable Gland for 1.1kV Grade 3.5C x 95 Sqmm LV Power Cable Double compression Nickel plated brass cable gland suitable for Aluminium conductor, Armoured Power cables, 1.1kV Grade 3.5C x 95 Sqmm LV Power Cable

Supply of Flame Proof Cable Gland for 1.1kV Grade 3.5C x 150 Sqmm LV Power Cable Double compression Nickel plated brass cable gland suitable for Aluminium conductor, Armoured Power cables, 1.1kV Grade 3.5C x 120 Sqmm LV Power Cable

Supply of Flame Proof Cable Gland for 1.1kV Grade 3C x 300 Sqmm LV Power Cable Double compression Nickel plated brass cable gland suitable for Aluminium conductor, Armoured Power cables, 1.1kV Grade 3C x 300 Sqmm LV Power Cable

Supply of Flame Proof Cable Gland for 1.1kV Grade 3.5C x 300 Sqmm LV Power Cable Double compression Nickel plated brass cable gland suitable for Aluminium conductor, Armoured Power cables, 1.1kV Grade 3.5C x 300 Sqmm LV Power Cable

SUPPLY OF WEATHER PROOF AND FLAMEPROOF CABLE GLANDS for 1.1 kV Grade, Cu conductor, XLPE insulated, Extruded PVC inner sheathed, armoured and FRLS PVC outer sheathed power cables / control cables

Supply of Weather Proof Cable Gland for 1.1kV Grade 3C x 2.5 Sqmm Control Cable Double compression Nickel plated brass cable gland suitable for Copper conductor, Armoured Control cables, 1.1kV Grade 3C x 2.5 Sqmm

Supply of Weather Proof Cable Gland for 1.1kV Grade 7C x 2.5 Sqmm Control Cable Double compression Nickel plated brass cable gland suitable for Copper conductor, Armoured Control cables, 1.1kV Grade 7C x 2.5 Sqmm

Supply of Weather Proof Cable Gland for 1.1kV Grade 14C x 2.5 Sqmm Control Cable Double compression Nickel plated brass cable gland suitable for Copper conductor, Armoured Control cables, 1.1kV Grade 14C x 2.5 Sqmm

Supply of Weather Proof Cable Gland for 1.1kV Grade 4C x 6 Sqmm LV Power Cable Double compression Nickel plated brass cable gland suitable for Copper conductor, Armoured LV Power cables, 1.1kV Grade 4C x 6 Sqmm

Supply of Weather Proof Cable Gland for 1.1kV Grade 2C x 10 Sqmm LV Power Cable Double compression Nickel plated brass cable gland suitable for Copper conductor, Armoured LV Power cables, 1.1kV Grade 2C x 10 Sqmm

Supply of Weather Proof Cable Gland for 1.1kV Grade 4C x 10 Sqmm LV Power Cable Double compression Nickel plated brass cable gland suitable for Copper conductor, Armoured LV Power cables, 1.1kV Grade 4C x 10 Sqmm

Supply of Weather Proof Cable Gland for 1.1kV Grade 4C x 16 Sqmm LV Power Cable Double compression Nickel plated brass cable gland suitable for Copper conductor, Armoured LV Power cables, 1.1kV Grade 4C x 16 Sqmm

Supply of Weather Proof Cable Gland for 1.1kV Grade 3C x 300 Sqmm LV Power Cable Double compression Nickel plated brass cable gland suitable for Copper conductor, Armoured LV Power cables, 1.1kV Grade 3C x 300 Sqmm

Supply of Flame Proof Cable Gland for 1.1kV Grade 3C x 2.5 Sqmm Control Cable Double compression Nickel plated brass cable gland suitable for Copper conductor, Armoured Control cables, 1.1kV Grade 7C x 2.5 Sqmm

Supply of Flame Proof Cable Gland for 1.1kV Grade 7C x 2.5 Sqmm Control Cable Double compression Nickel plated brass cable gland suitable for Copper conductor, Armoured Control cables, 1.1kV Grade 7C x 2.5 Sqmm

Supply of Flame Proof Cable Gland for 1.1kV Grade 14C x 2.5 Sqmm Control Cable Double compression Nickel plated brass cable gland suitable for Copper conductor, Armoured Control cables, 1.1kV Grade 14C x 2.5 Sqmm

Supply of Flame Proof Cable Gland for 1.1kV Grade 4C x 6 Sqmm LV Power Cable Double compression Nickel plated brass cable gland suitable for Copper conductor, Armoured LV Power cables, 1.1kV Grade 4C x 6 Sqmm

Supply of Flame Proof Cable Gland for 1.1kV Grade 2C x 10 Sqmm LV Power Cable Double compression Nickel plated brass cable gland suitable for Copper conductor, Armoured LV Power cables, 1.1kV Grade 4C x 6 Sqmm

Supply of Flame Proof Cable Gland for 1.1kV Grade 4C x 10 Sqmm LV Power Cable Double compression Nickel plated brass cable gland suitable for Copper conductor, Armoured LV Power cables, 1.1kV Grade 4C x 6 Sqmm

Supply of Flame Proof Cable Gland for 1.1kV Grade 4C x 16 Sqmm LV Power Cable Double compression Nickel plated brass cable gland suitable for Copper conductor, Armoured LV Power cables, 1.1kV Grade 4C x 16 Sqmm

Supply of Flame Proof Cable Gland for 1.1kV Grade 3C x 300 Sqmm LV Power Cable Double compression Nickel plated brass cable gland suitable for Copper conductor, Armoured LV Power cables, 1.1kV Grade 3C x 300 Sqmm

REMOVAL / DISMANTLING ACTIVITIES OF EXISTING CABLES

Removal / Dismantling of existing 1.1 kV Grade, Al conductor LV Power cables:

Removal / Dismantling of existing 1.1 kV Grade, 3.5C X 50 sq mm LV Power Cable. This shall include shifting & storing of demolished cables at owner's provided place (within OR outside plant premises) by contractor's own lifting & transporting arrangement, etc and as per the directions of Engineer-in-charge.

Removal / Dismantling of existing 1.1 kV Grade, 3.5C X 95 sq mm LV Power Cable. This shall include shifting & storing of demolished cables at owner's provided place (within OR outside plant premises) by contractor's own lifting & transporting arrangement, etc and as per the directions of Engineer-in-charge.

Removal / Dismantling of existing 1.1 kV Grade, 3.5C X 150 sq mm LV Power Cable. This shall include shifting & storing of demolished cables at owner's provided place (within OR outside plant premises) by contractor's own lifting & transporting arrangement, etc and as per the directions of Engineer-in-charge.

Removal / Dismantling of existing 1.1 kV Grade, 3C X 300 sq mm LV Power Cable. This shall include shifting & storing of demolished cables at owner's provided place (within OR outside plant premises) by contractor's own lifting & transporting arrangement, etc and as per the directions of Engineer-in-charge.

Removal / Dismantling of existing 1.1 kV Grade, 3.5C X 300 sq mm LV Power Cable. This shall include shifting & storing of demolished cables at owner's provided place (within OR outside plant premises) by contractor's own lifting & transporting arrangement, etc and as per the directions of Engineer-in-charge.

Removal / Dismantling of existing 1.1 kV Grade, CU/AL conductor power cables / control cables

Removal / Dismantling of existing 1.1 kV Grade, 3C x 2.5 sq mm Control Cable. This shall include shifting & storing of demolished materials at owner's provided place (within OR outside plant premises) as per the directions of Engineer-in-charge.

Removal / Dismantling of existing 1.1 kV Grade, 7C x 2.5 sq mm Control Cable. This shall include shifting & storing of demolished materials at owner's provided place (within OR outside plant premises) as per the directions of Engineer-in-charge.

Removal / Dismantling of existing 1.1 kV Grade, 14C x 2.5 sq mm Control Cable. This shall include shifting & storing of demolished materials at owner's provided place (within OR outside plant premises) as per the directions of Engineer-in-charge.

Removal / Dismantling of existing 1.1 kV Grade, 2C x 10 sq mm LV Power Cable. This shall include shifting & storing of demolished materials at owner's provided place (within OR outside plant premises) as per the directions of Engineer-in-charge.

Removal / Dismantling of existing of 1.1 kV Grade, 4C x 16 sq mm LV Power Cable. This shall include shifting & storing of demolished materials at owner's provided place (within OR outside plant premises) as per the directions of Engineer-in-charge.

REMOVAL / DISMANTLING ACTIVITIES OF EXISTING CABLE TERMINATIONS

Removal / Dismantling of existing 1.1 kV Grade, Al conductor LV Power cables:

Removal / Dismantling of existing 1.1 kV Grade, 3.5C X 50 sq mm LV Power Cable Termination. This shall include shifting & storing of demolished materials at owner's provided place (within OR outside plant premises) as per the directions of Engineer-in-charge.

Removal / Dismantling of existing 1.1 kV Grade, 3.5C X 95 sq mm LV Power Cable Termination. This shall include shifting & storing of demolished materials at owner's provided place (within OR outside plant premises) as per the directions of Engineer-in-charge.

Removal / Dismantling of existing 1.1 kV Grade, 3.5C X 150 sq mm LV Power Cable Termination. This shall include shifting & storing of demolished materials at owner's provided place (within OR outside plant premises) as per the directions of Engineer-in-charge.

Removal / Dismantling of existing 1.1 kV Grade, 3C X 300 sq mm LV Power Cable Termination. This shall include shifting & storing of demolished materials at owner's provided place (within OR outside plant premises) as per the directions of Engineer-in-charge.

Removal / Dismantling of existing 1.1 kV Grade, 3.5C X 300 sq mm LV Power Cable Termination. This shall include shifting & storing of demolished materials at owner's provided place (within OR outside plant premises) as per the directions of Engineer-in-charge.

Removal / Dismantling of existing 1.1 kV Grade, CU/AL conductor power cables / control cables

Removal / Dismantling of existing 1.1 kV Grade, 3C x 2.5 sq mm Control Cable Termination. This shall include shifting & storing of demolished materials at owner's provided place (within OR outside plant premises) as per the directions of Engineer-in-charge.

Removal / Dismantling of existing 1.1 kV Grade, 7C x 2.5 sq mm Control Cable Termination. This shall include shifting & storing of demolished materials at owner's provided place (within OR outside plant premises) as per the directions of Engineer-in-charge.

Removal / Dismantling of existing 1.1 kV Grade, 14C x 2.5 sq mm Control Cable Termination. This shall include shifting & storing of demolished materials at owner's provided place (within OR outside plant premises) as per the directions of Engineer-in-charge.

Removal / Dismantling of existing 1.1 kV Grade, 4C x 6 sq mm LV Power Cable Termination. This shall include shifting & storing of demolished materials at owner's provided place (within OR outside plant premises) as per the directions of Engineer-in-charge.

Removal / Dismantling of existing 1.1 kV Grade, 2C x 10 sq mm LV Power Cable Termination. This shall include shifting & storing of demolished materials at owner's provided place (within OR outside plant premises) as per the directions of Engineer-in-charge.

Removal / Dismantling of existing of 1.1 kV Grade, 4C x 16 sq mm LV Power Cable Termination. This shall include shifting & storing of demolished materials at owner's provided place (within OR outside plant premises) as per the directions of Engineer-in-charge.

Removal / Dismantling of existing of 1.1 kV Grade, 3C x 300 sq mm LV Power Cable Termination. This shall include shifting & storing of demolished materials at owner's provided place (within OR outside plant premises) as per the directions of Engineer-in-charge.

CABLE TRAYS, TRAY COVERS AND ACCESSORIES

SUPPLY OF CABLE TRAYS, TRAY COVERS AND ACCESSORIES

SUPPLY OF STRAIGHT ELEMENT, TRAY COVER FOR STRAIGHT ELEMENT

Supply of 300 mm Width Ladder Type GI Cable Tray Straight Element. 300mm width,(100mm side rail, 3 meter long) 3 mm thick, spacing of rungs at 250 mm, Galvanised Steel & ladder type trays, complete with necessary coupler plates, bonding Jumpers for earthing (8 SWG GI wire of 500mm length, with 2nos of crimpped Aluminium Lug with 2 nos M8 X 25 suitable for cable tray connection), accessories & hardwares (All hardware such as bolts, nuts, screws, washers will be stainless steel SS-304 grade)

Supply of 600 mm Width Ladder Type GI Cable Tray Straight Element. 600mm width,(100mm side rail, 3 meter long) 3 mm thick, spacing of rungs at 250 mm, Galvanised Steel & ladder type trays, complete with necessary coupler plates, bonding Jumpers for earthing (8 SWG GI wire of 500mm length, with 2nos of crimpped Aluminium Lug with 2 nos M8 X 25 suitable for cable tray connection), accessories & hardwares (All hardware such as bolts, nuts, screws, washers will be stainless steel SS-304 grade)

Supply of Tray Cover for 300 mm Width GI Cable Tray Straight Element. 300mm width, 1.6 mm thick Galvanised Steel trays covers complete with 2 sets of cover clamp, complete with accessories & hardwares (All hardware such as bolts, nuts, screws, washers will be stainless steel SS-304 grade)

Supply of Tray Cover for 600 mm Width GI Cable Tray Straight Element. 600mm width, 1.6 mm thick Galvanised Steel trays covers complete with 2 sets of cover clamp, complete with accessories & hardwares (All hardware such as bolts, nuts, screws, washers will be stainless steel SS-304 grade)

SUPPLY OF HORIZONTAL BENDS WITH BEND ANGLE 90 DEGREE AND TRAY COVER FOR HORIZONTAL BENDS WITH BEND ANGLE 90 DEGREE

Supply of 600 mm Width Cable Tray bend, 1200mm radius, Horizontal Bend of 90 degree Hot Dipped Galvanized Steel Ladder type, Horizontal Bend of 90 degree, radius 1200mm, width 600 mm, height 100mm, along with coupler plates, bonding Jumpers for earthing, bolts, nuts, washers and other necessary accessories and hardwares of stainless steel of SS-304 grade.

Supply of 300 mm Width Cable Tray bend, 1200mm radius, Horizontal Bend of 90 degree Hot Dipped Galvanized Steel Ladder type, Horizontal Bend of 90 degree, radius 1200mm, width 300 mm, height 100mm, along with coupler plates, bonding Jumpers for earthing, bolts, nuts, washers and other necessary accessories and hardwares of stainless steel SS-304 grade.

Supply of Tray Cover for 600 mm Width Cable Tray bend, 1200mm radius, Horizontal Bend of 90 degree Cover with 2 sets of cover clamps and its necessary hardware's suitable for Hot Dipped Galvanized Steel Ladder type, Horizontal Bend of 90 degree, radius 1200mm, width 600 mm, height 100mm complete with 2 sets of cover clamp, complete with accessories and hardwares of stainless steel SS-304 grade.

Supply of Tray Cover for 300 mm Width Cable Tray bend, 1200mm radius, Horizontal Bend of 90 degree Cover with 2 sets of cover clamps and its necessary hardware's suitable for Hot Dipped Galvanized Steel Ladder type, Horizontal Bend of 90 degree, radius 1200mm, width 300 mm, height 100mm complete with 2 sets of cover clamp, complete with accessories & hardwares of stainless steel SS-304 grade.

SUPPLY OF TEES AND COVERS FOR TEES

Supply of 600 mm Width Cable Tray Tee, 1200mm radius. Hot Dipped Galvanized ladder type Tee, width 600 mm, height 100mm, radius 1200mm, along with coupler plates, bonding Jumpers for earthing, bolts, nuts, washers and other necessary accessories and hardwares of stainless steel SS-304 grade.

Supply of 300 mm Width Cable Tray Tee, 1200mm radius. Hot Dipped Galvanized ladder type Tee, width 300 mm, height 100mm, radius 1200mm, along with coupler plates, bonding Jumpers for earthing, bolts, nuts, washers and other necessary accessories and hardwares of stainless steel of SS-304 grade.

Supply of Supply of Tray Cover for 600 mm Width Cable Tray Tee, 1200mm radius. Cover with 3 sets of cover clamps and its necessary hardware's suitable for Hot Dipped Galvanized ladder type Tee, width 600 mm, radius 1200mm, with bolts, nuts, washers complete with 2 sets of cover clamp, complete with accessories and hardwares of stainless steel SS-304 grade.

Supply of Tray Cover for Supply of 300 mm Width Cable Tray Tee, 1200mm radius. Cover with 3 sets of cover clamps and its necessary hardware's suitable for Hot Dipped Galvanized ladder type Tee, width 300 mm, radius 1200mm, with bolts, nuts, washers complete with 2 sets of cover clamp, complete with accessories and hardwares of stainless steel SS-304 grade.

SUPPLY OF HORIZONTAL ADJUSTABLE COUPLER

Supply of Horizontal Adjustable Coupler for 600 mm width cable tray. Hot Dipped Galvanized type Horizontal Adjustable Coupler, width 600 mm, height 100mm, along with coupler plates, bonding Jumpers for earthing, bolts, nuts, washers and other necessary accessories and hardwares of stainless steel SS-304 grade.

Supply of Horizontal Adjustable Coupler for 300 mm width cable tray. Hot Dipped Galvanized type Horizontal Adjustable Coupler, width 300 mm, height 100mm, along with coupler plates, bonding Jumpers for earthing, bolts, nuts, washers and other necessary accessories and hardwares of stainless steel SS-304 grade.

SUPPLY OF VERTICAL ADJUSTABLE COUPLER

Supply of Vertical Adjustable Coupler for 600 mm width cable tray. Hot Dipped Galvanized type Vertical Adjustable Coupler, width 600 mm, height 100mm, along with coupler plates, bonding Jumpers for earthing, bolts, nuts, washers and other necessary accessories and hardwares of stainles of SS-304 grade.

Supply of Vertical Adjustable Coupler for 300 mm width cable tray. Hot Dipped Galvanized type Vertical Adjustable Coupler, width 300 mm, height 100mm, along with coupler plates, bonding Jumpers for earthing, nuts, washers and other necessary accessories and hardwares of stainles of SS-304 grade.

INSTALLATION OF CABLE TRAYS, TRAY COVERS AND ACCESSORIES

INSTALLATION OF STRAIGHT ELEMENT, TRAY COVER FOR STRAIGHT ELEMENT

Installation of 300 mm Width Ladder Type GI Cable Tray Straight Element. 300mm width,(100mm side rail, 3 meter long) 3 mm thick, spacing of rungs at 250 mm, Galvanised Steel & ladder type trays, complete with necessary coupler plates, bonding Jumpers for earthing (8 SWG GI wire of 500mm length, with 2nos of crimpped Aluminium Lug with 2 nos M8 X 25 suitable for cable tray connection), accessories & hardwares (All hardware such as bolts, nuts, screws, washers will be stainless steel of SS-304 grade)

Installation of 600 mm Width Ladder Type GI Cable Tray Straight Element. 600mm width,(100mm side rail, 3 meter long) 3 mm thick, spacing of rungs at 250 mm, Galvanised Steel & ladder type trays, complete with necessary coupler plates, bonding Jumpers for earthing (8 SWG GI wire of 500mm length, with 2nos of crimpped Aluminium Lug with 2 nos M8 X 25 suitable for cable tray connection), accessories & hardwares (All hardware such as bolts, nuts, screws, washers will be stainless steel of SS-304 grade)

Installation of Tray Cover for 300 mm Width GI Cable Tray Straight Element. 300mm width, 1.6 mm thick Galvanised Steel trays covers complete with 2 sets of cover clamp, complete with accessories & hardwares (All hardware such as bolts, nuts, screws, washers will be stainless steel of SS-304 grade)

Installation of Tray Cover for 600 mm Width GI Cable Tray Straight Element. 600mm width, 1.6 mm thick Galvanised Steel trays covers complete with 2 sets of cover clamp, complete with accessories & hardwares (All hardware such as bolts, nuts, screws, washers will be stainless steel of SS-304 grade)

INSTALLATION OF HORIZONTAL BENDS WITH BEND ANGLE 90 DEGREE AND TRAY COVER FOR HORIZONTAL BENDS WITH BEND ANGLE 90 DEGREE

Installation of 600 mm Width Cable Tray bend, 1200mm radius, Horizontal Bend of 90 degree Hot Dipped Galvanized Steel Ladder type, Horizontal Bend of 90 degree, radius 1200mm, width 600 mm, height 100mm, along with coupler plates, bonding Jumpers for earthing, bolts, nuts, washers and other necessary accessories.

Installation of 300 mm Width Cable Tray bend, 1200mm radius, Horizontal Bend of 90 degree Hot Dipped Galvanized Steel Ladder type, Horizontal Bend of 90 degree, radius 1200mm, width 300 mm, height 100mm, along with coupler plates, bonding Jumpers for earthing, bolts, nuts, washers and other necessary accessories.

Installation of Tray Cover for 600 mm Width Cable Tray bend, 1200mm radius, Horizontal Bend of 90 degree Cover with 2 sets of cover clamps and its necessary hardware's suitable for Hot Dipped Galvanized Steel Ladder type, Horizontal Bend of 90 degree, radius 1200mm, width 600 mm, height 100mm complete with 2 sets of cover clamp, complete with accessories & hardwares

Installation of Tray Cover for 300 mm Width Cable Tray bend, 1200mm radius, Horizontal Bend of 90 degree Cover with 2 sets of cover clamps and its necessary hardware's suitable for Hot Dipped Galvanized Steel Ladder type, Horizontal Bend of 90 degree, radius 1200mm, width 300 mm, height 100mm complete with 2 sets of cover clamp, complete with accessories & hardwares

INSTALLATION OF TEES AND COVERS FOR TEES

Installation of 600 mm Width Cable Tray Tee, 1200mm radius. Hot Dipped Galvanized ladder type Tee, width 600 mm, height 100mm, radius 1200mm, along with coupler plates, bonding Jumpers for earthing, bolts, nuts, washers and other necessary accessories.

Installation of 300 mm Width Cable Tray Tee, 1200mm radius. Hot Dipped Galvanized ladder type Tee, width 300 mm, height 100mm, radius 1200mm, along with coupler plates, bonding Jumpers for earthing, bolts, nuts, washers and other necessary accessories.

Installation of Supply of Tray Cover for 600 mm Width Cable Tray Tee, 1200mm radius. Cover with 3 sets of cover clamps and its necessary hardware's suitable for Hot Dipped Galvanized ladder type Tee, width 600 mm, radius 1200mm, with bolts, nuts, washers complete with 2 sets of cover clamp, complete with accessories & hardwares

Installation of Tray Cover for Supply of 300 mm Width Cable Tray Tee, 1200mm radius. Cover with 3 sets of cover clamps and its necessary hardware's suitable for Hot Dipped Galvanized ladder type Tee, width 300 mm, radius 1200mm, with bolts, nuts, washers complete with 2 sets of cover clamp, complete with accessories & hardwares

INSTALLATION OF HORIZONTAL ADJUSTABLE COUPLER

Installation of Horizontal Adjustable Coupler for 600 mm width cable tray. Hot Dipped Galvanized type Horizontal Adjustable Coupler, width 600 mm, height 100mm, along with coupler plates, bonding Jumpers for earthing, bolts, nuts, washers and other necessary accessories.

Installation of Horizontal Adjustable Coupler for 300 mm width cable tray. Hot Dipped Galvanized type Horizontal Adjustable Coupler, width 300 mm, height 100mm, along with coupler plates, bonding Jumpers for earthing, bolts, nuts, washers and other necessary accessories.

INSTALLATION OF VERTICAL ADJUSTABLE COUPLER

Installation of Vertical Adjustable Coupler for 600 mm width cable tray. Hot Dipped Galvanized type Vertical Adjustable Coupler, width 600 mm, height 100mm, along with coupler plates, bonding Jumpers for earthing, bolts, nuts, washers and other necessary accessories.

Installation of Vertical Adjustable Coupler for 300 mm width cable tray. Hot Dipped Galvanized type Vertical Adjustable Coupler, width 300 mm, height 100mm, along with coupler plates, bonding Jumpers for earthing, nuts, washers and other necessary accessories.

SUPPLY AND INSTALLATIONS OF EARTHING MATERIALS

Supply of GI Earth conductors for Earthing & Connection to Main Earth Grid

Supply of 50 x 10 mm GI earth strip

Supply of 50 x 6 mm GI earth strip

Supply of 10 mm dia GI Wire Rope

Laying, clamping and connecting of GI Earth conductors for Earthing & Connection to Main Earth Grid

Laying, clamping and connecting of 50 x 10 mm GI earth strip for main earth grid/earthing network under ground, along structure, cable trays, racks walls, roofs, in trench etc. including excavation and filling of earth, chipping and remaking of concrete surface, supply and fixing of GI clamps, Supply of fixing GI fastners at earth plate & at equipment end wherever required. Supply & applying bitumin paint & hessian tape on underground joints & cold zinc spray on aboveground joints. Earthing to be carreid out as per IS:3043 It also includes any modification work because of fouling with under ground/above ground piping.

Laying, clamping and connecting of 50 x 6 mm GI earth strip for main earth grid/earthing network under ground, along structure, cable trays, racks walls, roofs, in trench etc. including excavation and filling of earth, chipping and remaking of concrete surface, supply and fixing of GI clamps, Supply of fixing GI fastners at earth plate & at equipment end wherever required. Supply & applying bitumin paint & hessian tape on underground joints & cold zinc spray on aboveground joints. Earthing to be carreid out as per IS:3043 It also includes any modification work because of fouling with under ground/above ground piping.

Laying, clamping and connecting of 10 mm dia GI Wire Rope and connection to main earth grid/earthing network under ground, along structure, cable trays, racks walls, roofs, in trench etc. including excavation and filling of earth, chipping and remaking of concrete surface, supply and fixing of GI clamps, Supply of fixing GI fastners at earth plate & at equipment end wherever required. Supply & applying bitumin paint & hessian tape on underground joints & cold zinc spray on aboveground joints. Earthing to be carreid out as per IS:3043 It also includes any modification work because of fouling with under ground/above ground piping.

Lighting

Street Lighting Pole

Supply, Erection, Testing and commissioning of 9 Meter Height Hot dip Galvanised Tubular / Ooctagonal Street Lighting Pole of Single ARM including four nos foundation Anchor bolts and accessories. The lighting pole shall be bolted on a pre-cast foundation with a set of four Foundation bolts for greater rigidity. Supply, Installation, earthing, glanding, termination of incoming and outgoing cables/ wires at luminaire , testing and commissioning of lighting luminaires (including junction box) and other accessories suitable for outdoor installation. This shall include transportation from owner's issue point to actual place of installation by contractor's own lifting & transporting arrangement, unpacking, assembly of luminaries, drilling etc. as required, all labour and material complete as per drawings, specification of this tender and directions of Engineer-in-charge. Following Site Conditions will be considered for design and installation of 9 meter height Single ARM Tubular Street Lighting Pole: ● Maximum Ambient temperature : 38 Deg C ● Minimum Ambient temperature : 5 Deg C ● Equipment design temperature : 40 Deg C ● Earthquake Design factor : (Code IS-1893 Zone-V/Site spectra whichever is governing), As per IS 1893,Seismic factor = 0.36 ● Wind speed : 50 meter / sec ● Site Altitude : 90 m above MSL ● Relative humidity : 85% at 3 Deg C ● Environmental conditions : Corrosive Industrial Environment / Extreme Moisture (Tropical Climate) The Lighting Pole will comply the following specification as minimum, but not limited to the following : ● Poles shall be bolted on a pre-cast foundation with a set of four Foundation bolts for greater rigidity. ● The pole shaft shall be made from sheet steel . ● The pole shaft shall have tubular / octagonal cross section and shall be continuously tapered with single longitudinal welding. There shall not be any circumferential welding. ● GI Base Plate of minium 350 X 350 X 16 mm. ● Suitable for mounting / installation 120 Watt LED based street lighting fixture.

Supply, Erection, Testing and commissioning of 9 Meter Height FRP Street Lighting Pole of Single ARM including four nos foundation Anchor bolts and accessories. The lighting pole shall be bolted on a pre-cast foundation with a set of four Foundation bolts for greater rigidity. Supply, Installation, earthing, glanding, termination of incoming and outgoing cables/ wires at luminaire, testing and commissioning of lighting luminaires (including junction box) and other accessories suitable for outdoor installation. This shall include transportation from owner's issue point to actual place of installation by contractor's own lifting & transporting arrangement, unpacking, assembly of luminaries, drilling etc. as required, all labour and material complete as per drawings, specification of this tender and directions of Engineer-in-charge. Following Site Conditions will be considered for design and installation of 9 meter height Single ARM FRP Street Lighting Pole: ● Maximum Ambient temperature : 38 Deg C ● Minimum Ambient temperature : 5 Deg C ● Equipment design temperature : 40 Deg C ● Earthquake Design factor : (Code IS-1893 Zone-V/Site spectra whichever is governing), As per IS 1893,Seismic factor = 0.36 ● Wind speed : 50 meter / sec ● Site Altitude : 90 m above MSL ● Relative humidity : 85% at 3 Deg C ● Environmental conditions : Corrosive Industrial Environment / Extreme Moisture (Tropical Climate) The Lighting Pole will comply the following specification as minimum, but not limited to the following : ● Poles shall be bolted on a pre-cast foundation with a set of four Foundation bolts for greater rigidity. ● Poles shall be highly resistant to impact deflection and bending, and shall be highly safe in case of a collision, fire resistant (using special resins), electrically non‐conductive and safe without grounding. ● Poles shall be corrosion proof, resistant to chemical reactions, with UV protection against weatherability. ● Base plates with anchor bolts ● Colour shall be as per Purchaser approval during drawing approval.

Relocation of Existing Street Lighting Pole

Re-location and Re-Installation of Existing Street Lighting Pole, Testing and commissioning of Lighting Pole and accessories and replacement of existing light fixture with 90W LED based street light fixture.

Demolition of Existing Street Lighting Pole

Demolition of Existing Street Lighting Pole including all accessories including the removal of junction box, cabling, earthing, glanding, including associated foundations / structures and other accessories. This shall include shifting & storing of demolished street lighting pole and the accessories to owner's provided place by contractor's own lifting & transporting arrangement, etc. as required, all labour and material complete and as per the directions of Engineer-in-charge.

SUPPLY AND INSTALLATION OF STREET LIGHTING FIXTURE

Supply, Installation, testing & commissioning of 1x120W LED Based Street Lighting Fixtures for Street Lighting Poles. This includes supply of 10 meter length CU conductor 3CX2.5 sq mm XLPE insulated cables along-with street light fixtures and inclusive of double compression Nickel plated brass cable gland for cable termination.

Supply, Installation, testing & commissioning of flameproof Street Light Fixture of 1x120W LED. Light fixture will be suitable for installation at outdoor hazardous area of Gas group of IIA & IIB and CIMFR certified. This includes supply of 10 meter length CU conductor 3CX2.5 sq mm XLPE insulated cables along-with street light fixtures and inclusive of flame proof double compression Nickel plated brass cable gland for cable termination.

SUPPLY AND INSTALLATION OF LIGHTING JUCTION BOX

Supply, installation, termination of Four (4) Way Weather proof Lighting Junction Box with Diecast Aluminium enclosure material, IP66, Suitable for termination of one number incoming cable size of 4CX6 sq mm, one number outgoing cable size of 4CX6 sq mm and two number outgoing cable size of 3Cx2.5/4 sq mm, cu conductor, armoured, XLPE insulated cables. JBs will be suitable for suitable installation in outdoor street lighting pole. Supply will inclusive of four numbers double compression Nickel plated brass cable gland for incoming and all outgoing cables, one number dummy stopper plug, SS hardwares (SS-304) for mounting / installation.

Supply, installation, termination of Four (4) Way Weather proof Lighting Junction Box with FRP enclosure material, IP66, Suitable for termination of one number incoming cable size of 4CX6 sq mm, one number outgoing cable size of 4CX6 sq mm and two number outgoing cable size of 3Cx2.5/4 sq mm, cu conductor, armoured, XLPE insulated cables. JBs will be suitable for suitable installation in outdoor street lighting pole. Supply will inclusive of four numbers double compression Nickel plated brass cable gland for incoming and all outgoing cables, one number dummy stopper plug, SS hardwares (SS-304) for mounting / installation.

Supply, installation, termination of Four (4) Way flame proof Lighting Junction Box with Diecast Aluminium enclosure material, IP66,suitable for Zone 2 gas group IIA/IIB, Temp. Class T3, Suitable for termination of one number incoming cable size of 4CX6 sq mm, one number outgoing cable size of 4CX6 sq mm and two number outgoing cable size of 3Cx2.5/4 sq mm, cu conductor, armoured, XLPE insulated cables. JBs will be suitable for suitable installation in Zone 2, gas group IIA/IIB, Temp. Class T3. Supply will inclusive of four numbers double compression Nickel plated brass cable gland for incoming and all outgoing cables, one number of dummy stopper plg, SS hardwares (SS-304) for mounting / installation.

GI PIPE SLEEVES

Supply of of class B, GI pipes/ sleeves for cable protection

Supply of of class B, GI pipes/ sleeves, 50 mm dia

Supply of of class B, GI pipes/ sleeves, 63 mm dia

Fabrication and installation of GI Pipes

Fabrication and installation of of 50 mm dia, class B, GI pipes/ sleeves for cable protection, fixed on steel, concrete or similar structure, in trenches, ready to be buried in concrete including cutting, bending, grinding, threading and similar works, supply & fixing of required GI fastners, clamps, small iron structures, spacers, cleats, plug, bushings, sealing compound/ material etc., cutting and remaking of concrete surface including supply of civil material, all labour and materials complete as per approved drawings, specification of this tender and directions of Engineer-in-charge.

Fabrication and installation of of 63 mm dia, class B, GI pipes/ sleeves for cable protection, fixed on steel, concrete or similar structure, in trenches, ready to be buried in concrete including cutting, bending, grinding, threading and similar works, supply & fixing of required GI fastners, clamps, small iron structures, spacers, cleats, plug, bushings, sealing compound/ material etc., cutting and remaking of concrete surface including supply of civil material, all labour and materials complete as per approved drawings, specification of this tender and directions of Engineer-in-charge.

STRUCTURAL MEMBERS

SUPPLY, FABRICATION, INSTALLATION OF STRUCTURAL MEMBERS

Supply, Fabrication and installation of various sizes steel for supports, brackets for miscellaneous electrical equipment, base frames, support for switchgear, supports for outdoor lighting fixtures, hangers, risers, clamps etc. for miscellaneous electrical equipment / items, cable and cable tray supports with rolled MS sections, pipes, plates, strip etc., including shot blasting, welding, bolting, rivetting, supply of necessary anchor bolts and grouting etc. Including surface finish, painting with one coat of 60 micron DFT of inorganic zinc silicate primer, 1 coat of 100 micron Two pack Epoxy HB Poly amide cured, including breaking walls, floors etc. for structures as required, including supply of all G.I hardware materials, including all labour and materials, complete as per approved drawings, specification of this tender and directions of Engineer-In-charge. Any item weighing up to 1 kg or less shall neither be measured nor paid.

DISMANTLING / REMOVAL OF EXISTING STRUCTURAL MEMBERS

Dismantling, Removal, Shifting, Storage of existing Structural materials (like : Tray supports at Existing Cable trench, etc). This shall include shifting & storing of demolished structural supports / materials at owner's provided place (within OR outside plant premises) by contractor's own lifting & transporting arrangement, etc and as per the directions of Engineer-in-charge.

MISCELLANEOUS ACTIVITIES

Lettering and Stenciling of 32 mm height including supply of approved colour of Paint/Paints , painting of tag number of Electrical equipments as specified in specification & by Engineer -In-Charge. Supply of various types of paints, primers, preparation of surfaces by manual, hand tool cleaning, power tool cleaning and application of primer and finish paints for equipments surfaces/concrete surfaces, identification (Equipment name) lettering, stenciling,colour bands, colour coding etc as specified including rubdown and touch up of shop primer wherever required, providing scaffolding at all elevations, various locations, labour, materials, tools & tackles, consumables, safety, PPE's, supervision, etc. to complete the work in all respect as per the Painting Specifications drawings, and direction & full satisfaction of owner's/engineer in charge for all types of equipment as specified in the Painting specifications:

Lettering and Stenciling of 32 mm height including supply of approved colour of Paint/Paints , painting of tag number of Electrical equipments as specified in specification & by Engineer -In-Charge. Supply of various types of paints, primers, preparation of surfaces by manual, hand tool cleaning, power tool cleaning and application of primer and finish paints for equipments surfaces/concrete surfaces, identification (Equipment name) lettering, stenciling,colour bands, colour coding etc as specified including rubdown and touch up of shop primer wherever required, providing scaffolding at all elevations, various locations, labour, materials, tools & tackles, consumables, safety, PPE's, supervision, etc. to complete the work in all respect as per the Painting Specifications drawings, and direction & full satisfaction of owner's/engineer in charge for all types of equipment as specified in the Painting specifications:

Supply and installation of water proof material for sealing cable entries inside the switchgear buildings, outside electrical equipment / panel termination (Like : motor termination, DG termination, HV Switchgear, etc termination) of reputed make and as per Site engineer recommendation

Supply and installation of fire proof material for sealing cable entries inside the switchgear buildings, outside electrical equipment / panel termination (Like : motor termination, DG termination, HV Switchgear, etc termination) of reputed make and as per Site engineer recommendation

supply and Filling of Saturated Fine River Sand

FIRE WATER LINE ( UNIT No. FW (AG))

Carbon Steel(A94A) Short Code - PIP Size1 (Inch) - 28 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 10 Component Group - PIPE

Carbon Steel(A94A) Short Code - GAT Size1 (Inch) - 28 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 150LBS Component Group - VALVE

Carbon Steel(A94A) Short Code - FLG Size1 (Inch) - 28 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 150LBS / 10 MM Component Group - FLANGE

Carbon Steel(A94A) Short Code - GAS Size1 (Inch) - 28 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 150LBS Component Group - GASKET

Carbon Steel(A94A) Short Code - BOLT Size1 (Inch) - 1 1/4 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 110 Component Group - BOLT

Carbon Steel(A94A) Short Code - 45E Size1 (Inch) - 28 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 10 Component Group - FITTING

Carbon Steel(A94A) Short Code - 90E Size1 (Inch) - 28 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 10 Component Group - FITTING

Carbon Steel(A94A) Short Code - ERE Size1 (Inch) - 28 Size2 (Inch) - 20 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 10 Shc. 2 / Thk. MM - 8 Component Group - FITTING

Carbon Steel(A94A) Short Code - TEE Size1 (Inch) - 28 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 10 Component Group - FITTING

Carbon Steel(A94A) Short Code - R.PAD Size1 (Inch) - 28 Size2 (Inch) - 12 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 10 Shc. 2 / Thk. MM - 6 Component Group - FITTING

Carbon Steel(A94A) Short Code - TEE Size1 (Inch) - 12 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 6 Component Group - FITTING

Carbon Steel(A94A) Short Code - PIP Size1 (Inch) - 12 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 6 Component Group - PIPE

Carbon Steel(A94A) Short Code - PIP Size1 (Inch) - 28 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 10 Component Group - PIPE

Carbon Steel(A94A) Short Code - 45E Size1 (Inch) - 28 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 10 Component Group - FITTING

Carbon Steel(A94A) Short Code - 90E Size1 (Inch) - 28 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 10 Component Group - FITTING

Carbon Steel(A94A) Short Code - GAT Size1 (Inch) - 20 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 150LBS Component Group - VALVE

Carbon Steel(A94A) Short Code - FLG Size1 (Inch) - 20 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 150LBS Component Group - FLANGE

Carbon Steel(A94A) Short Code - GAS Size1 (Inch) - 20 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 150LBS Component Group - GASKET

Carbon Steel(A94A) Short Code - BOLT Size1 (Inch) - 1 1/8 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 180 Component Group - BOLT

Carbon Steel(A94A) Short Code - ERE Size1 (Inch) - 20 Size2 (Inch) - 12 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 8 Shc. 2 / Thk. MM - 6 Component Group - FITTING

Carbon Steel(A94A) Short Code - ERE Size1 (Inch) - 12 Size2 (Inch) - 8 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 6 Shc. 2 / Thk. MM - 6 Component Group - FITTING

Carbon Steel(A94A) Short Code - 45E Size1 (Inch) - 20 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 8 Component Group - FITTING

Carbon Steel(A94A) Short Code - TEE Size1 (Inch) - 20 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 8 Component Group - FITTING

Carbon Steel(A94A) Short Code - R.PAD Size1 (Inch) - 20 Size2 (Inch) - 8 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 8 Shc. 2 / Thk. MM - 6 Component Group - FITTING

Carbon Steel(A94A) Short Code - R.PAD Size1 (Inch) - 20 Size2 (Inch) - 4 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 8 Shc. 2 / Thk. MM - 5.4 Component Group - FITTING

Carbon Steel(A94A) Short Code - PIP Size1 (Inch) - 20 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 8 Component Group - PIPE

Carbon Steel(A94A) Short Code - PIP Size1 (Inch) - 20 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 8 Component Group - PIPE

Carbon Steel(A94A) Short Code - 45E Size1 (Inch) - 20 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 8 Component Group - FITTING

Carbon Steel(A94A) Short Code - PIP Size1 (Inch) - 8 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 6 Component Group - PIPE

Carbon Steel(A94A) Short Code - 45E Size1 (Inch) - 8 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 6 Component Group - FITTING

Carbon Steel(A94A) Short Code - 45E Size1 (Inch) - 8 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 6 Component Group - FITTING

Carbon Steel(A94A) Short Code - 90E Size1 (Inch) - 12 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 6 Component Group - FITTING

Carbon Steel(A94A) Short Code - BLF Size1 (Inch) - 28 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 150LBS Component Group - FLANGE

Carbon Steel(A94A) Short Code - BLF Size1 (Inch) - 20 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 150LBS Component Group - FLANGE

Carbon Steel(A94A) Short Code - BLF Size1 (Inch) - 8 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 150LBS Component Group - FLANGE

Carbon Steel(A94A) Short Code - FLG Size1 (Inch) - 8 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 150LBS Component Group - FLANGE

Carbon Steel(A94A) Short Code - GAS Size1 (Inch) - 8 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 6 Component Group - GASKET

Carbon Steel(A94A) Short Code - BOLT Size1 (Inch) - 3/4 Rating/ Shc. 1 / Thk. MM / Bolt Length. MM - 120 Component Group - BOLT

Description of Work / Item(s)

Amount

PIPING WORKS

PIPING - Dimantling of Existing Piping : - Removal/Dismantling of Existing piping of all thickness in Above ground, Underground, Culverts along with the connected piping components/fittings like elbows,tee, branches,valves connected hydrants and monitors, pipe supports, supporting structures/pedestals, instruments and other associated items as per GADs/ P&Ids/ instructions of Enginner-in-charge at all elevation from the identified locaton in site and transport to wareouse/yard in the refinery premises including decommissioning, draining, cleaning and purging of the lines to be removed, Cutting,Unbolting / Dismantling / dropping of all types & ratings of erected valves, blinding / de blinding,installation of flanges and blind flanges, providing and fixing & removal of temporary adapters, steam / air /water hose, loosening of gaskets, bolts nuts by consumable, tools and tackles etc, cutting of pipes in appropriate length for transporting purposes,cleaning, flushing, drying and transporting, weighing at designated place and stacking of the serviceable materials, cleaning the site of work of all materials for disposal to anywhere within the plant boundary, transporting the re-usable materials to the identified location inside the refinery premises & complete the work in all respect as per the drawing, instruction of owner's / PMC's Engineer in charge (Piping inch metre will include valves and fittings also during measurement).

Dismantling

NB 6 INCH

NB 8 INCH

NB 10 INCH

NB 12 INCH

NB 14 INCH

NB 16 INCH

PIPING - LINED (Fire water Piping AG & UG ) : Receipt of Materials, Transportation of piping items to worksite/work shop; fabrication including cutting, edge preparation, (inclusive of grinding the edges of pipe, fittings, flanges,etc. to match with the mating edges of uneven/different thickness wherever required); fitup, bending, preheating wherever required, welding, threading, and laying of pipes of all types and thickness over sleepers, overhead on racks and at all elevations, connecting with equipment nozzles, strainers, sight glass, orifice assemblies, spray nozzles, flow meters, tappings for pressure gauges, thermowells, sample connections, springs, sample coolers etc. and fixing of gaskets, bolts, nuts including application of torque wherever required & all other inline instruments and fittings , like elbows, reducers, tees, vents, drains, SW valves upto 1.5 NB, Piping Specials such as Mitres and fabricated fittings, alignment, Fixing and welding of RF pad, supply and welding of strips to all pipes before hydro testing at exit points of Units for earthing purpose, cleaning & flushing by water/compressed air, hydrostatic, pneumatic, vaccum, spark testing , card board blasting, leak test, inertization, hot bolting if required and any other type of testing as specified, draining, drying by compressed air, performing Positive Material Identification (PMI) of existing/new lines using alloy analysers, completing all such works in all respects and as per the specifications, drawings and instructions of Engineer-In-Charge. PMI test shall be performed by third party hired by the contractor after taking prior approval of ngineer-in-charge. Rates for tubing (if any) shall include rates for valves, fittings, all in line instruments and testing etc.

The Contractor scope of Works also includes carrying out Precommissioning activities such as dropping of the valves, control valves, safety valves, orifice plates, thermowells, spool pieces etc. , air and water flushing and air blasting, steam blowing, air drying, reinstalling the valves, control valves and spool pieces, leak testing etc. as per Pre-commissioning specifications / procedure and instruction of Engineer-in-charge including supply of necessary hand tools, equipments / machineries, consummables (electrodes, filler wires, gas, card board, target plate, scaffolding etc. wherever required). The Contractor's scope of Works /supply also includes temporary Piping fabrication for precommissioning, steam blowing, supply of temporary gaskets, supply of temporary blinds cut from plates, hose pipes / couplings required for Water flushing / air blasting, fabrication nd erection of Temporary spool pieces etc.

CARBON STEEL - LINED AG PIPING (NON IBR);

FABRICATION OF LINED AG PIPING

NB UPTO 1.5 INCH

NB 2 INCH - 6 INCH

NB 8 INCH - 14 INCH

NB 16 INCH - 24 INCH

NB 24 INCH - 28 INCH

ERECTION

NB UPTO 1.5 INCH

NB 2 INCH - 6 INCH

NB 8 INCH - 14 INCH

NB 16 INCH - 24 INCH

NB 24 INCH - 28 INCH

DESCRIPTION SAME AS ITEM NO. 1.2 BUT FOR CARBON STEEL - UG LINED + COATING PIPING (NON IBR);

FABRICATION OF LINED + COATING PIPING

NB 8 INCH - 14 INCH

NB 16 INCH - 20 INCH

NB 24 INCH - 28 INCH

ERECTION

NB 8 INCH - 14 INCH

NB 16 INCH - 20 INCH

NB 24 INCH - 28 INCH

VALVES : - Transportation of all types of valves (including special, control valves & motor operated valves) from Owner's Storage point to contractor's stores /worksite and installation of valves for all rating including assembly of valves accessories, if any, fixing of gaskets bolts/nuts wherever required as per specification, drawings and directions of Engineer-In-charge.

All Types of Valves such as Gate, Globe, Check, Ball, Plug valves up to # 300 class

NB. 8 INCH

NB. 20 INCH

NB. 28 INCH

RADIOGRAPHY: - Performance of radiographic inspection on piping of all types & thickness including providing or hiring of all necessary equipment and whatever else even though not expressely mentioned but required to perform the work as per specifications and instructions of Engineer-in-charge. Rates are inclusive of radiography machine, manpower, consumables etc. and all other equipments required to perform the radiography at all heights to the satisfaction of Engineer-in-charge.Radiographs shall be submitted to the Engineer-in-charge. (Repeat Radiography due to defective radiograph on repaired joints due to Contractor's fault and for additional radiography necessitated due to poor performance of contractor's welders shall be done at contractor's cost)

Film Radiography by Gamma Rays

Radiography by Gamma Ray using Selenium (Se 75) source.

PIPE SUPPORTS FOR OFFSITE & INTERCONNECTING PIPEWAYS

PIPE SUPPORTS (FROM MATERIALS SUPPLIED BY CONTRACTOR) : Supply, Fabrication, erection (at all elevations) of pipe supports like shoes, cradles, clamps (of all sizes/thicknesses manufactured by forming method using die), saddles, guides, special supports, pads, T post, brackets and trunion supports etc. of all types including supply and application,shot blasting, one coat of primer, intermediate & final paint, all necessary equipments, consumables, labour, and completing work as per drawings, specifications and instructions of Engineer-in-charge. Modifications/rectifications, if required; and adjustments/alignment during precommissioning, commissioning as per the instructions of Engineer-in-charge. Exclusion / Free Issue support materials from Owners are: a. Hangers, b. Spring Supports c. Tie Rods d. Rigid Struts e.sliding plates

C.S. Structural Steel (CONTRACTOR'S Supply)

PAINTING

Supply of paints and primers, preparation of surfaces and application of primer and finish paints, identification ( Line numbering), lettering, colour bands, colour coding etc. As specified including rubdown and touch up of shop primer wherever required, providing scaffolding for all heights, labour, material, tools and tackles, consumables supervision etc. to complete the work in all respects, drawings and direction of Engineer-in-Charge for all type of uninsulated piping and insulated piping as specified including pipes, fittings, flanges, supports, valves etc. Surface preparation by blast cleaning and application of first coat of primer (as specified in Painting spec) shall be done in fabrication yard prior to erection. For insulated piping wherever blast cleaning with no primer application is specified (insulated SS), in such cases finish paints shall also be applied in the fabrication yard. The identification marks of the piping and joints shall be noted before blasting and the same shall be transferred on primed surface with Polyurethane paint (F2) or as per the instructions of Engineer-in-charge.

Notes: 1. All joints (fabrication as well as erection joints) shall be left unpainted till hydrotesting. 2. No extra payment shall be made for identification (line numbering etc.) of insulated and uninsulated lines.

PAINTING OF UNINSULATED CS PIPING as per Painting Specification

DESIGN TEMP GROUP: -14 to 100 (Deg C): As per Painting Specificaton

NB. 0.5 INCH

NB. 0.75 INCH

NB. 1 INCH

NB. 1.5 INCH

NB. 2 INCH

NB. 3 INCH

NB. 4 INCH

NB. 6 INCH

NB. 8 INCH

NB. 20 INCH

NB. 28 INCH

COMMISSIONING ASSISTANCE:

Carrying out Commissioning activities such as Valves operations, cleaning of strainers, Flange tightening and any other activities / assistance etc. as per Commissioning specifications / procedure and instruction of Engineer-in-charge including supply of necessary hand tools, equipments / machineries, consummables (electrodes, filler wires, gas, card board, target plate, scaffolding etc. wherever required) and with the single point responsibility of Contractor's supervision. Note: This Manpower shall be utilized for Commissioning assistance requirement over and above that already described elsewhere in the Price Schedule. One Manday is 12 Hour duty.

Skilled Manpower (with Hand Tools, Equipment / Machinery, Consummables)

Semi Skilled Manpower (with Hand Tools)

Helper / Unskilled Manpower

Misc. Works (Related to Piping Fabrication and Erection)

MODIFICATION/ HOOK-UPS :Cutting, bevelling, fitup, welding of different sizes of CS( NON IBR) piping of all types and thicknesses in shop, in position, on ground/overhead on rack and at all elevations; transportation of pipes, fittings, flanges etc from owner's storage point to work site/ work shop, making necessary scaffoldings, consumables, machinery, tools, tackles, labour, hydrotesting upto the nearest isolation point and supervision including attending repairs,arranging dewatering pump,hookup with existing lines connecting with equipment nozzles,fire fighting equipments like hydrant, monitor, HVLRM etc, strainers, sight glass, orifice assemblies, spray nozzles, flow meters, tappings for pressure gauges, thermowells, sample connections, springs, sample coolers etc. and fixing of gaskets, bolts, nuts including application of torque wherever required & all other inline instruments and fittings , alignment, Fixing and welding of RF pad, for completing the work as per the instruction of Engineer-in-charge.

Flame Cutting/cold cutting C.S. Piping IBR/Non IBR

Fitup & welding C.S. Piping Non IBR

HydroTesting, flushing, drying etc. of existing lines C.S. Piping Non IBR including Blinding and Deblinding of existing lines

Flame Cutting/cold cutting C.S. Piping Non IBR

Fitup & welding C.S. Piping Non IBR

HydroTesting, flushing, drying etc. of existing lines C.S. Piping Non IBR including Blinding and Deblinding of existing lines

CIVIL AND STRUCTURAL WORKS

Site Clearance

Clearing Grass and Removal of Rubbish

Clearing grass and removal of rubbish up to a distance of 30m outside the periphery of the area. By manual means. Grubbing, scrubbing & clearing the areas, removal of roots/boulders, breaking clods, making up the hollow produced by removal of roots/boulders with available earth, clearing the site of all objectionable/unserviceable materials by means of manual or mechanical excavation as per directions of Engineer-in-Charge. Including loading, transport, unloading and disposal of the unserviceable material at designated areas within the plant boundary and leveling the same.

Dismantling of RCC

Dismantling of existing structures like culverts, bridges, retaining walls,drains, trenches, and other structure comprising of masonry, cement concrete, including Tools and Machineries and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 500 m outside exit gate (By mechanical means. )

Plain Cement Concrete of all Mix grades

Reinforced Cement Concrete of all Mix grades

Dismantling Brick/Tile Work

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick/Block/Rubble masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 500 m outside exit gate

Brickwork /Rubble masonry made with Cement Mortar of all mix

Dismantling Steel Work

Dismantling Steel Work in all Types of Sections upto a height of 5 m above Plinth Level excluding Cutting of rivet , including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 500 m outside exit gate

Removal of Telephone/Electric Poles and Lines

Removal of telephone/electric poles with wires including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and upto a lead of 500 m and stacking the serviceable and unserviceable material

Relocation of manual Call Point

Relocation of Instrument call Points with wires including excavation and dismantling of existing foundation concrete and lines and installing new foundation with pole under the supervision of concerned department, disposal with all lifts and upto a lead of 500 m and stacking the serviceable and unserviceable material

EXCAVATION

Earth work in excavation for all kind of Soil including all labour, materials, dressing of sides, pumping & bailing out water accumulated due to rain and / or subsoil waters and including disposal or stacking, leveling and neatly dressing as decided by Engineer-in-Charge of surplus excavated material within a lead of 500 M etc including providing temporary supports to existing service lines like water pipes, sewerage, electric cables, etc., if any, complete, including shoring/ strutting if required, all materials and labour complete and as directed by Engineer-in-Charge for following depth. Excavated soil shall be disposed at least 50 m away from the Plant Boundary / kept for backfilling within a radius of 500M and the charges for the same is included in this item.

From grade level upto 1.5m depth

BACKFILLLING and EARTH DISPOSAL

BACKFILLLING WITH W.M.M. Backfilling in section excavations for foundation, plinth, trenches etc with W.M.M supplied by Contractor , loading, transporting the earth to site of work, unloading, breaking clods and laying at all depths and heights in layers of 150 mm loose thickness, watering and ramming to proper compaction to achieve 85% laboratory maximum dry density as per IS 2720 part XIV, before providing the above treatment the base of foundation pit shall be compacted to 95% max dry density as per IS 2720 part VII. all complete as per directions of Engineer-in-Charge. Price shall be including cost of backfill material along with all royalties. including Inspections and Tests.

BACKFILLLING WITH River sand Backfilling in section excavations for foundation, plinth, trenches etc with riversand supplied by Contractor after excavating the same from approved borrow areas, loading, transporting the sand to site of work, unloading, laying at all depths and heights in layers of 150 mm loose thickness, watering and ramming to proper compaction to achieve 85% laboratory maximum dry density, dressing etc. all complete as per directions of Engineer-in-Charge and including certification of used material in compliance with the Soil Recommendations. Price shall be including cost of backfill material along with all royalties. including Inspections and Tests.

Transportation of surplus earth/debris (excavated earth from item 7.0 above) Carting the surplus excavated earth/rocks and debris from construction area beyond the initial lead of 500 meters to the approved dumping area within the plant boundary ncluding re-excavating deposited soil excavated earlier, transportation, loading, unloading, laying at all depths/heights, stacking, levelling and dressing both the area (viz. from where the earth is carted and where it is deposited) to required levels and slopes complete with all lifts.

LEAN CONCRETE (PCC 1:4:8)

Providing and laying in position Plain Cement Concrete 1:4:8 (1 Cement: 4 Coarse Sand: 8 Graded Stone Aggregates) with 40 mm and down size graded stone aggregate as leveling course in foundations, under slabs on grade etc., including tamping, curing, shuttering etc. complete for all depths and heights. For details refer specification for Plain and Reinforced concrete (NR-0ZZZZ-CV-SPE-0002).. Materials to be supplied as per approved vendor lists attached with special conditions of contract.

FOUNDATION CONCRETE

FOUNDATION CONCRETE Providing and laying in position Reinforced Cement Concrete in open foundations, trenches, precast cover slabs of specified grade( design mix ) with 20 mm and down size graded stone aggregates including screening and cleaning of coarse aggregates, fineaggregate (sand) conforming to proper grading, zone, both of approved quality and Ordinary POrtlamnd Cement , as necessary, cost of curing with water, excluding cost of centering and shuttering and reinforcement including providing pockets/ shear keys during concreting, vibrating, tamping, curing, sampling, testing and rendering if required, to give a smooth and even surface etc. including cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge, cost for quality control,sampling, testing etc. including cost of all material & labor in substructure, footings and other similar items not specifically mentioned herein, for all depths, complete as per drawings, specification and as directed by Engineer-in-charge/ owner. For details refer specification for Plain and Reinforced concrete (NR-0ZZZZ-CV-SPE-0002). Materials to be supplied as per approved vendor lists attached with special conditions of contract.

M-25 grade of concrete

M-30 grade of concrete

bipolar concrete corrosion inhibitors

Supply and installation of 50mm dia PVC sleeves (embed in concrete foundation), including tools, equipment and labour necessary to complete the work.

Supply and installation of 63NB GI pipe sleeves (embed in concrete foundation), including tools, equipment and labour necessary to complete the work.

FORMWORK

Providing and fixing plywood centring and shuttering straight / inclined, in foundations for footings, rafts, retaining walls, trenches, pedestals, pipe sleepers, culverts, drains, pipe way bridges, tunnels, liquid storage structures etc. including keeping the same in position during concreting and removal of the same after specified period, keeping necessary provision for inserts, projecting dowels etc., tools, equipments and labour necessary for the work all compete, and as specified and directed.

SURFACE TREATMENT OF FOUNDATION Providing surface treatment to foundations in contact with aggressive water or soil in form of linings, membranes, mastic seal, coal tar epoxy paint, bitumen paint / layer, mortar fillet, protection board etc including materials, tools and tackles as specified in the Drawings, specifications and directions of Engineer-in-charge. Inspections and Tests as per relevant specification / IS codes shall be deemed to be included in the scope

Bitumen Paint/ Layer : Surface Treatment of Foundations using Bitumen Paint / Layer

DEFORMED/TMT STEEL BARS FOR CONCRETE REINFORCEMENT

Supply and fixing in position TMT reinforcement bars Fe500D conforming to IS-1786 (FY=500 MPa) for RCC work including the cost of steel and cost of binding wire, carting the same to site of work, straightening, cleaning, cutting, binding with 18 SWG black soft annealed binding wire, and placing with proper cover blocks, supports, chairs, spacers, complete for all heights and depths complete as per drawing & specification. Materials to be supplied as per approved vendor lists attached with special conditions of contract. For payment reinforcement including authorized weight for spacer bars, laps, chairs etc shall be measured separately for diameter wise length actually used. Wastages & unauthorized laps shall not be considered for payment. Inspections and Tests as per relevant technical specifications and codes shall be deemed to be included in the scope

SUPPLY AND INSTALLATION OF ANCHOR BOLTS

Fabricating, supplying and installing thread Anchor Bolts of specified diameter conforming to IS 2062 Grade BR as per drawings, including the cost of M.S. rounds and plates, nuts, washers , anchor plates, fine plates, stiffness, pipes sleeves etc, material as per relevant IS codes, fixing in position with necessary, tools, templates, labour etc for all heights and depths, all complete. Materials to be supplied as per approved vendor lists attached with special conditions of contract.

NON-SHRINK GROUT FOR STRUCTURAL STEEL COLUMNS/ POSTS/ EQUIPMENT/

Supply and laying non-shrinking grout with a minimum crushing strength of 40 N/mm2 for grouting under base plates, base frames or other anchoring elements for structures and/or machines, including cleaning of surfaces, form-works, chamfering of edges, smoothing of exposed surfaces, providing all tools and labour necessary to complete the work as per drawings / specifications and as directed. The non shrink grout shall be laid as per approved vendor‘s specification ( SIKA/FOSROC make)

STRUCTURAL STEEL Supplying, fabricating and erecting in position steel structures conforming to IS : 2062 grade BR comprising of rolled and built up sections for side runners, beams, columns, trussed girders, sag rods, etc., including the cost of straightening if required, cutting to required size bolting and or welding of joints as per drawings, Surface preparation SSPC-SP-10, painting with one coat of 60 micron DFT of inorganic zinc silicate primer, 1 coat of 100 micron Two pack Epoxy HB Poly amide cured, fixing in line or level with temporary staging, complete with all tools, equipments and labour for all depths and heights as per drawings and directed. Materials to be supplied as per approved vendor lists attached with special conditions of contract.

Tray supports at Grade level

Same as 19.0 but for Structural Steel Inserts, w/ TMT Fe 500D lugs & exposed surface painted

TRENCH for underground electrical cables, meant for electric poles, High Light Mast, etc., as per drawings Laying Cables in Trenches in Unpaved areas, Rectangular or Trapezoidal Trench as per given Layout, including Supply and Laying 50thk Red Concrete protection tiles ( Concrete Cable Protection Cover are manufactured to IS 5820-1970 and imprinted as standard with the indented lettering warning legend “ELECTRIC “. The precast cable cover generally of two Types namely with Peak and Flat) , Supply and Laying Yellow warning tape imprinted as per specification/drawings TP-1ZZZA-CV-GAS-0016.02. Quoted rates excludes Excavation (Covered in item 11.1), disposal of earth(Covered in item 12.4), supply and backfilling with fine river sand(Covered in item 12.3) and backfilling of sected earth upto FGL in layers of 150mm (Covered in item 12.1).

PUNJAB ENGINEERING COMPANY (PROJECT DIVISION)

P K CONSTRUCTION

M/s. Sparkon Engineers

North East Engineering n Construction

M/s P.K.M. ERECTORS

ASSOCIATED WORKS INFRA PVT. LTD.

Mech Technik (India) Private Limited

P K CONSTRUCTION

M/s. Sparkon Engineers

PUNJAB ENGINEERING COMPANY (PROJECT DIVISION)

M/s P.K.M. ERECTORS

ASSOCIATED WORKS INFRA PVT. LTD.

Bidder Name

PUNJAB ENGINEERING COMPANY (PROJECT DIVISION)