Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹5.5 LAccepted-AOC | 1 | Accepted-AOC BEING LOWEST | |
| 2 | 2₹5.7 L+₹8,328.30 (1.47%)Rejected-Finance 1 215 BHOOSA MANDI FATEHGARH FATEHGARH FARRUKHABAD UTTAR PRADESH 209601 | FARRUKHABAD | UTTAR PRADESH | 209601 | 2 | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹6.5 L
EMD Value
₹13,500
Closing Date
17 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE(I) FATEHGARH
FATEHGARH
SPL REPAIR TO BLDG NO P-262 (RECREATION ROOM) AT 431(I) SUP PL ASC AND SPL REPAIR TOILETS BLDG NO. 8/B AND 7/B OF RAJPUT REGT CENTRE AT FATEHGARH CANTT
2022_MES_564093_1
AGE(I)/FAT/ET-31 OF 2022-2023
Open Tender
Miscellaneous Works
Item Rate
180 days
AGE(I) FATEHGARH
PLEASE REFER TO TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
AGE(I) FATEHGARH
₹13,500
Yes
6 Feb 2023
19 Nov 2022
23 Dec 2022
19 Nov 2022
17 Dec 2022
3 Dec 2022
19 Nov 2022 - 2 Dec 2022
Amount
Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.
M&L for cement concrete (1:2:4) type B-1,( using 12.5mm graded stone aggregate) set in C:M 1:4 in, lintel,kitchen slabs etc complete all as specified and directed.
M & L mild steel TMT bars 6 to 8mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and directed
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm each not exc 4.00 sqm each complete all as specified and directed
S & F Anodised aluminium frame work for window/ventilator made out of approved section incl providing necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150 mm long ( 1 No.) hinges type B-21 100 mm long (2 no.) suitable handle(1 No.), 100mm long tower bolt (02 Nos), 300mm long aluminium sliding door bolt ( 01 No) (all fittings per window complete all as specified. Note:- Fabrication work shall be got done by approved fabricator or manufacturer of aluminium complete all as specified and directed
S & F Anodised aluminium frame work for door made out of approved section incl providing necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading screws, anodised aluminium fittings such as hinges type 150 mm long (3 no.) suitable handle(2 No.), 150 mm long tower bolt (02 Nos) (all fittings per window) complete all as specified and directed
S&F sheet glass 4.8mm thick ordinary quality exc 0.5 sqm each complete all as specified and directed
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill toproper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed
S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed
Taking down cement plaster on brick wall or stone wall etc. including raking out joints hacking for key, scrubbing down with water etc and disposed off unserviceable material of out side MD land complete all as specified and directed.
Demolition of brickwork masonary built in lime or cement mortar including all quiens arches, pillars etc. But including concrete articles complete all as specified and directed
M&L half brick thick walls built in CM 1:4 Sub Class B bricks straight or curved on plan to any radius complete all as specified and directed
M & L Rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed
M & L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed
M & L Rendering 5mm thick in CM (1:3) on fair faces of brick work ceilling concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed
M & L for preparation of new plastered surfaces of walls and applying two coats of OBD over a coat of chalk whitening complete all as specified and directed.
M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.
M & L for preparation of new plastered surfaces of walls and applying three coats of whitewash complete all as specified and directed
M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceilling complete all as specified and directed.
M & L for preparation of old plastered surfaces of walls by rubbing down and making surface smooth and applying two coats of OBD over a coat of 1mm thick wall putty complete all as specified and directed
M & L for preparation of old plastered surfaces of walls by rubbing down and making surface smooth and applying two coats of cement base paint complete all as specified and directed
M & L for preparation of old plastered surfaces of walls and applying two coats of whitewash complete all as specified and directed
M & L for preparation of old plastered surfaces of ceiling and applying two coats of white wash on ceilling complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving n.exc 15cm thickness (below or above ground level) etc complete all as specified and directed.
S & F Vitrified Ceramic Tiles 8 to 9 mm thick (Square/rectangular) light shade polished area of each tiles not exceeding 0.36 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match incl 15 mm thk screed bed in CM 1:6 complete all as specified and directed.
M & L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors,skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of cement (1:6) complete all as specified and directed.
M & L Glazed ceramic tiles in vertical surface 300x 450x 7 mm set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement (1:6) complete all as spfd and directed.
M & L 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded aggregateds as in subbase of floors complete all as specified and directed
M & L for providing prepolished chequered cement concrete tiles of size 30cm x 30cm x 25mm thick set & jointed in neat cement slurry with grey cement and pigment including 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying of chequered tile complete all as specified and directed.
M&L for 75 mm thick PCC type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection laid in bays n. exc. 2 sqm each, finishing the surface of concrete topping even & fair, without using extra cement filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand (all by weight) complete all as specified and directed
M & L 75 mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) as in floors etc complete
S&Fin repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed up, capacity in 500 Ltrs, hoisted and fixed in position with all fittings and fixtures including float valve 20 mm bore in position complete all as specified in SSR Part-I complete all as specified and directed.
Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.
S&F False Ceiling Horizontal level regular edge grid 600 x600 mm from work using hot dip sections and fixing tiles vinyl laminated MPL gypsum panels size 595x595x6 to 8mm thick after lamination, suspended the grid with grid hangers to Roof Truss / RCC Slab all as per manufactured instruction complete all as specified and directed.
S&F 5 to 8mm thick PVC hollow wall panelling fixed to wall with L or U shaped beading at ends fixed with screws complete all as specified and directed.
S&F in repair Vitreous China Wash Basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets , 32 mm PVC waste pipe, 32 mm PTMT Waste coupling and 15 mm dia Pillar taps fancy type chromium plated complete all as specified and directed
S&F in repair Vitreous China Wash down water closet pedestal patteren white with platic seat cover including Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook complete all as specified and as directed .
S&F in repair Low Level Flushing System PVC valveless syphonic action type, 10 ltrs capacity white, with inlet, ball float and handle including brackets complete all as specified and directed.
S&F in repair Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in walls, ceiling or laid in floors etc complete all as specified and directed.
S&F in repair Steel Tubes Medium Grade Bore of tube in 20 mm galavanised with all fitting laid in walls, ceiling or laid in floors etc complete all as specified and directed.
S&F in repair 15mm bore Chromium plated Bib taps fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair 15 mm bore ,Stop valves, cast copper alloy,screwed down, high pressure,screwed both ends for iron pipe or for unions and fixed fancytype, chromium plated with long shank and cup(concealed type)complete all as specified and directed.
S&F in repair 15 mm bore ,Stop valves/angle valve, cast copper alloy,screwed down, high pressure, screwed both/one ends for iron pipe or for unions and fixed fancy type, chromium plated complete all as specified and directed.
S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.
S & F in repairs brass chromium plated showe rose 125mm size with shower arm complete all as specified an directed by Engineer - in - Charge .
S&F in repair PTMT grating doom 100mm dia with or without waste hole etc complete all as specified and directed.
S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.
Demolition and breaking up drain pipes 100 mm dia(Salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.
S&F Cast iron soil, waste and vent pipe of bore 100mm sand cast in any length with or without ears with lead joints fixed to wall complete all as specified and directed.
S&F Cast iron soil, waste and vent pipe of bore 100mm sand cast in any length with or without ears with run lead joints laid in trenches or in floors complete all as specified and directed.
S&F Cast iron bends (any redius) 100mm bore with oval access door fixed with lead joints complete all as specified and directed.
S&F clamps for CI/PVC pipe 100mm dia made out of flat iron 25mmx3mm fixed to wall by means of stainless steel fastener of size 10mmx72mm(2no.s for each clamp) complete all as specified and directed.”
S&F Vitreous china water closet squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap for 100mm pipe (excluding flush pipe and flushing cistern) all as spd but fixed in repair. all as specified and directed by Engineer-in-Charge.
Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm complete all as specified and directed.
S&F factory made 35 mm thick Plain, framed,panelled shutters(any number ofpanels), withpanels of timber flat on both sides(feather edged), orof veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.
S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.
S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing specified in SSR complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S Frame shall be covered with heat moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock and bottom rail on either side & as gap insert for tip rail & bottorm rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/seated to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing specified in SSR complete all as specified and directed..
S&F Aluminium anodised barrel tower bolts of extruded section of 150 mm size etc complete all as specified and directed.
S&F Aluminium handles, cast type anodised of size 150 mm etc complete all as specified and directed.
S&F aluminium butt hinges anodised of size 100mm medium weight complete all as specified and directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each panel complete all as specified and directed.
S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to steel windows/wodden doors complete all as specified and directed.
M&L preparing surfaces new of wood and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.
S & F aluminium sliding door bolt 300mm long clip type, stove enamelled black with bright bolt not less than 16mm dia complete.
Taking down copper/aluminium point wiring of any discrapation and any position (light, fan, socket or power point) complete, including fixture and fittings such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified.
M&L for point wiring of light/fan/exhaust fan point controlled by one switch with 1100 volt grade PVC insulated and unsheathed 1.5 Sq mm (FRLS) multistranded copper conductor cable with continuous earth wire of 1.5 Sq mm (FRLS) multistranded copper conductor cable PVC insulated and unsheathed, drawn in & including concealed PVC rigid conduit medium grade with fittings (ISI marked) not less than 20 mm dia & 1.6 mm thick sunken pressed steel galvanised terminal boxes with top cover ISI marked plastic laminated hylam sheet for housing/ fixing switches etc complete all as specified and directed for the following- Note- (i) The quoted rete is deemed to be included for the chases cutting. (ii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour.
ditto as above but for One 5 pin 5 Amp switch socket combination point on an independent board…ditto…
ditto as above but for One 5 pin 5 Amp socket point controlled by one switch on same board…ditto….
ditto as above but for one 15 Amp 6 Pin switch socket combination independent with 4 Sqmm FRLS unsheathed copper conductor single core multistranded complete all as specified.
S&F switch piano flush type 5 Amp single pole one way complete all as specified and directed.
S&F switch socket combination 2 in 1 flush type 5 Amp 5 Pin complete all as specified and directed.
S&F switch socket combination 5 in 1, 5/15 Amp flush type complete all as specified and directed.
M & L lamp holder PVC/Polycarbonate type insulated body with back plate angle type for batten fittings complete all as specified & directed.
Supply and fix electronic fan regulator 5 stepped type complete all as specified and directed
S&F ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed.
Supply and fixing in replacement MCB distribution board SPN 240 Volt 6 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with copper thimbles as required complete all as specified.
S&F in replacement of MCB SPN 16-40 Amp 240 volt 'C' curve complete all as specifed and directed.
S&F MCB in replacement of MCB SP 6 to 32 Amp 240 Volt 'C' curve 10 KA complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F surface and wall mounted 18/20W LED extruded aluminium batten fiitting provided for efficient heat dissipation complate all as specified and directed .
S&F in replacement LED 600x600mm fully diffused recessed LED luminair with high transmitive diffuser 36W complete all as specified and directed.
S&F in replacement LED wall light 12 W unbreakable poly carbonate suitable for mounting on wall /surface complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick, burried directly into the ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanised iron or steel all as shown iln electrical plate No - 3 connected to earthing test point all as specified or indicated including excavation and connected earth work, PCC chamber and cover, watering pipe, funnel wire mesh but without earth lead protection pipe and test on completion after dismantling unserviceable erthing (above GL only) complete all as directed incl dismantling of exsisting earthing. Note :- On testing after completion if desired earth resistence is not obtained, the earthing will be redone at no extra cost.
M/S SRI JAGDAMBE TRADERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .