Repairing of 8 Nos of building or 17 units of NEEPCO Security Quarters at 5th Km Colony Khandong Power House KHEP Umrongso

Amount

Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels.

Plain cement concrete works with coarse aggregates of sizes 13mm to 32mm in foundation bed for footing steps, walls bricks works etc. as directed and specified including dewatering if necessary and curing complete (Shuttering where necessary shall be measured and paid separately). a) In prop. 1:3:6 (1 cement : 3 sand: 6 coarse agg. By volume, (using mixture machine)

15 mm thick cemnt plaster in single coat on fair side of brick/concrete walls for interior plastering upto first floor level including arises, internal rounded angles, chamfers and/ or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. (b) in cement mortar 1:4

Neat cement finishing over the cement plaster surface with cement slurry for bond @ 2.75 Kg/ M2 of area including curing etc. complete.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (b) In proportion 1:4.

Providing, fitting, fixing full paneled doors/ windows including oxidised M.S. butt hinges (100mmx75mmx3.55mm) with necessary screws (other fittings to be measured and paid seperately) (b) With 1st class local wood (Hollock/ Bola/ Bonsum.) (ii) 35mm thck.

Providing, fitting and fixing fully glazed window with sash bars including oxidised M.S butt hinges (75mmx 60mmx3.15mm) 2nos.on each leaf and 3 nos. on single leaf (glass panes to be measured and paid separately) (C) With 1st class local wood (ii) 35mm thick

Providing dressed wood work in post, walls,battens, post plate bressumers etc. includingsupplying and fixing with spikes, nails,bolt and nuts of 12mm dia(M.S) and required length etc.complete with kiricide oiling two coats to faces in contact with C.C or masonry (M.S flats, angle cleats and bolt and nuts required for flats,angle cleats wherever use shall be measured and paid separately) (e) With 2nd class treated timber

Providing, fitting and fixing hard board sheet ceilling with approved quality with necessary nails, wood screws including 1st class local wood 50mm x 12mm ( hollock/ bonsum/ sundi ) beading including paining two coats to timber beads complete as directed ( ceilling joist to be measured and paid separately ). (a). 3 mm thick

Dismantling all types of corrugated/ trapezoidal sheet roofing including ridges, hips, valleys and gutters etc. and stacking the materials as directed by the department for all levels

Providing galvd iron ridging of TATA SHAKTEE / SAIL including supplying and fixing necessary galvd screws/washers etc. complete as directed.(a) 0.45 mm thick (i) 150 mm lapping

Supplying, ftiing, fixing anodised aluminium fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects and with countersunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright natural matt & satin finished). (a) Tower Bolt (iv) 150 x 10mm

( b) Door Handler (ii)100 mm

Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately)Indian type W.C Orissa pattern of size 580 x 440 mm (a) White (i) Parryware make

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. (i) 110mm dia.

Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (v) 63mm dia. PVC cowel of ISI make

White washing with lime on wall surface (two coats) give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter

Painting two coat (excluding priming coat) on old wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping. (i) Surfaces over 100 mm in width or girth. (a) General Purpose (Asian paint/ Berger paint/ICI paint/ J&N paint/ Nerolac)-

Providing and fixing clear sheet glass beded in putty and fixed with/ without wooden beadings including necessary cutting of glass to required sizes (payment for wooden beads shall be made seperately) (I) Area of glass pane not exceeding 0.15sq.m (c) 3.00mm thick