Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹4.4 LAccepted-AOC OPPOSITE VIPUL GAS AGENCY HOSPITAL ROAD SOLAN H P | SOLAN | SOLAN | HIMACHAL PRADESH | L-1 | Accepted-AOC Accepted | |
| 2 | L-2₹4.5 L+₹8,000 (1.82%)Rejected-Finance H NO 281 PHASE III HOUSING BOARD BADDI TEHSIL BADDI DISTRICT SOLAN HP | L-2 | Rejected-Finance Rejected | |
| 3 | L-3₹5.0 L+₹65,000 (14.8%)Rejected-Finance | L-3 | Rejected-Finance Rejected | |
| 4 | L-4₹6.0 L+₹1.6 L (36.3%)Rejected-Finance HAMIRPUR ROAD NEAR BUS STAND UNA DISTT UNA HP | UNA | HIMACHAL PRADESH | 174301 | L-4 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | SS ENGINEERING WORKS L4 | Bharat Engg and Suppliers L3 | ANITA KUMARI CONTRACTOR L2 | ROYAL ENGINEERING WORKS L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Supply, erection, testing & commissioning of 50 HP horizontal spindle, horizontal split casing, radial split Single,/Multistages centrifugal pumps of standarad make such as KSB/ Mather & Platt/ Jyoti / Kirloskar/ Beaconweir/BS & BE conforming to BIS 1520-1980 with upto date ammendments read with BIS 9137-1978 or latest edition to handle clear raw water having charteristics as mentioned in item as under, with impelleres, casing ring, priming funnels & shaft sleeves of bronze, shaft of steel with cast iron casing of suitable capacity coupled directly through a flexible coupling on a common base plate of cast steel /Mild steel to BHEL /Kirlokar/ NGEF/ Crompton / Siemen/Jyoti /GEC make slip ring /squirrel cage screen protected drip proof induction electric motor suitable for operation on the data given below. The power of motor should be atleast 10% on excess of the maximum power required by the pump in operation range & (-) 15% of the duty point head. i/c the cost of all accessories in all lead & lifts & carriage of material at site as per direction of Engineer-in-Charge. | 1 | 50 HP | 5,35,000 ₹5,35,000 | 4,25,000 ₹4,25,000 | 3,69,000 ₹3,69,000 Lowest | 3,70,000 ₹3,70,000 |
| 1.01Total Head:- 193.00 mtrs. | |||||||
| 1.02Discharge (Q):- 9.00 LPS. | |||||||
| 1.03Dia of Rising Main(in mm):- 125 mm dia. | |||||||
| 2.00 | Providing and fixing suitable size base plate including with all leads and lifts. | 1 | No. | - | 10,000 ₹10,000 | 9,000 ₹9,000 | 5,000 ₹5,000 Lowest |
| 3.00Providing and fixing of fully automatic control pannel with push button start star delta starter for centrifugal pump set of KSB/Kirloskar/BS/Crompton or any other reputed make fabricated with MS Sheet and angle duly painted and complete with internal wiring comprising of main switch of including auto start and auto stop facility,single phase preventer, three phase indicator timer,relay, selector switch,auto start,stop facility etc.with manually start, stop facility with in all respects. | |||||||
| 3.01 | 1 No. Panel (Suitable for 50 HP Centrifugal P/M of LWSS Mandhala -II). | 1 | 50 HP | 64,500 ₹64,500 Lowest | 70,000 ₹70,000 | 70,000 ₹70,000 | 65,000 ₹65,000 |
Tender Value
₹5.0 L
EMD Value
₹9,980
Closing Date
12 Aug 2025, 11:00 amClosed
Executive Engineer
Jal Shakti Division Baddi
(SH- Replacement of centrifugal pumping set 50 HP of Lift water supply scheme Mandhala-II both pump and motor with allied accessories).
2025_HPIPH_111379_1
NIT No. 9529-9629 Dt. 31-07-2025
Open Tender
Civil Works
Item Rate
30 days
Baddi
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
₹9,980
15 Sept 2025
31 Jul 2025
12 Aug 2025
31 Jul 2025
12 Aug 2025
31 Jul 2025
31 Jul 2025 - 11 Aug 2025
Amount
Supply, erection, testing & commissioning of 50 HP horizontal spindle, horizontal split casing, radial split Single,/Multistages centrifugal pumps of standarad make such as KSB/ Mather & Platt/ Jyoti / Kirloskar/ Beaconweir/BS & BE conforming to BIS 1520-1980 with upto date ammendments read with BIS 9137-1978 or latest edition to handle clear raw water having charteristics as mentioned in item as under, with impelleres, casing ring, priming funnels & shaft sleeves of bronze, shaft of steel with cast iron casing of suitable capacity coupled directly through a flexible coupling on a common base plate of cast steel /Mild steel to BHEL /Kirlokar/ NGEF/ Crompton / Siemen/Jyoti /GEC make slip ring /squirrel cage screen protected drip proof induction electric motor suitable for operation on the data given below. The power of motor should be atleast 10% on excess of the maximum power required by the pump in operation range & (-) 15% of the duty point head. i/c the cost of all accessories in all lead & lifts & carriage of material at site as per direction of Engineer-in-Charge.
Total Head:- 193.00 mtrs.
Discharge (Q):- 9.00 LPS.
Dia of Rising Main(in mm):- 125 mm dia.
Providing and fixing suitable size base plate including with all leads and lifts.
1 No. Panel (Suitable for 50 HP Centrifugal P/M of LWSS Mandhala -II).
ANITA KUMARI CONTRACTOR (BID ID -543608)
Bharat Engg and Suppliers (BID ID -543607)
SS ENGINEERING WORKS (BID ID -543169)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .