Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.0 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹32.5 L+₹1.2 L (3.77%)Rejected-Finance OPP MARUTI SERVICE CENTRE SARACHARMA POST SRI VIJAYA PURAM 744 105 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹33.4 L+₹2.0 L (6.41%)Rejected-Finance 956 2 CHANDERSEKER ENTERPRISE OPP MARICAR HOSPITAL OLD CCS JUNGLIGHAT SOUTH ANDAMAN ANDAMAN NICOBAR 744103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹34.0 L+₹2.7 L (8.53%)Rejected-Finance NEAR OLD CCS JUNGLIGHAT SRI VIJAYA PURAM 744 103 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹34.4 L+₹3.1 L (9.75%)Rejected-Finance OPP CCS GARACHARMA PORT BLAIR 744105 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹31.2 L
EMD Value
₹62,400
Closing Date
25 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Haddo Port Blair
GARRISON ENGINEER HADDO Military Engineer Services Haddo Post Port Blair Andaman and Nicobar 744102
ADDITION/ALTERATION OF BLDG NO P-125 (TANMAY BUILDING) NEAR CG JETTY GATE OF COAST GUARD UNDER GE HADDO
2022_MES_535861_1
8645/GE/H/PB
Open Tender
Civil Works
Item Rate
180 days
GE Haddo Port Blair
Class D Category a(i)
10 documents required · 10 mandatory
₹500
GE Haddo
₹62,400
Yes
30 Aug 2022
5 Jul 2022
30 Jul 2022
5 Jul 2022
25 Jul 2022
19 Jul 2022
5 Jul 2022 - 12 Jul 2022
Amount
Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laid in any mortar complete all as specified.
Demolition of cement concrete un-reinforced in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed.
M & L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) 25mm thick as in levelling course, sub-floors and paving etc complete all as specified.
M&L for vitrified tiles light shade 10mm thick (square/ rectangular) polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified.
Ditto all as per item No 05 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified
M&L for glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified.
M&L 16 to 18mm thick granite stone (of any type ) work (table rubbed and polished) in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including grinding and mirror polishing complete. (Note : Colour of granite shall be as approved by Engr-In-Charge)
Rounding ( chamfering) to edge of marble/granite slab edge with mirror polishing such complete.
M & L for seamless false ceiling made out of 12mm thick of gypsum board fixed to the ceiling section with 25mm long self drilling and tapping screws having Philips head with under head cutter at 200mm centre to centre, including finishing the joints of face board with specially formulated joining compound and 48 mm wide fibre tape to provide seam less finish and including GI channel 0.55 mm thick with two unequal flanges of 20 to 30mm and web of 27 mm fixed to surrounding wall using nylon sleeve and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 215 mm each and web of 45 mm suspended from soffits at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.20mtr length) of 0.55 mm thick having kurled web of 50 mm and flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including 6mm thick GI hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40x3 mm size long and expansion hold fasteners 12.5mm dia 40mm long including thin layer of Pop with Gypsum binder, sanding the surfaces till smooth surface is obtained and finally applying two coats of acrylic emulsion over one coat primer over 3mm thick putty all as specified and as directed
Taking down chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each
Taking down Aluminium Windows chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each
Taking down Aluminium Windows and Ventilator chowkhats or frames with shutters without taking off shutters from frame n. exe 1.5 Sqm each
S&F IInd class hardwood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints.
S&F flush shutter 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6mm thick wooden lipping around the edges of shutter complete all as specified and directed.
S&F 35mm thick, IInd class hard wood glazed and skeleton shutter open rebated and prepared to receive gauze, etc. ( without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing gauze etc size of members of shutters as specified in as Part I Ses 8 Cl 8.24 (a)
S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification all as directed
S & F for Factory made solid PVC molded with particle board core door shutter 30 mm thick panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing all as specified
S&F for mild steel holdfast, bands, straps, bracket/ clamp for eves gutter, valley gutter and similar conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
M & L cement concrete (1:3:6) type C-1 using 20mm graded aggregate as in lintle upto 1.5m clear span, steps, bed plates, kerb & coping including necessary formwork.
S&F in butt hinges extruded brass with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21
S&F extruded brass handle fabricated type anodized 150mm long.
S&F brass barrel bolt of extruded section 150mm long
S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy
M&L preparing new wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer all as specified
S& F for powder coated aluminium shutters of sliding/ openable/ fixed/ fully glazed/partially glazed/fully gauge/ Skelton door/ window and ventilator frame etc., with glass or gauge and panels with prelaminated particle board inserts, side hung type, without sash bars, using standard aluminium sections including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, roller for sliding windows, locking arrangement, anodized aluminium fittings such as handles, required hinging device etc. complete all as specified and directed. Note- Wire mesh and Glass pane will be measured and paid seperately as in supply only.
Supply only plain sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane.
Supply only figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane.
Supply and fix aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed.
S&F powder coated aluminium grill of approved pattern cut to required size/shape and fixed with position with aluminium bedding & frame with & including F sections, fixed to aluminium windows/ventilators complete all as specified and directed.
Dismantling of cast iron/PVC pipe any dia and any shape incl bends/branch pieces jointed in cement mortar and taking out if reqd.
S&F in repairs for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.
S&F in repairs for 110mm dia PVC (SWR) bends any radius complete all as specified.
S&F in repairs for 110mm dia PVC (SWR) bends with acess door any radius complete all as specified.
S&F in repairs for 110mm dia PVC (SWR) branch piece single (Single T ) equal or unequal complete all as specified.
S&F in repairs for 110mm dia PVC (SWR) vent cowl complete all as specified.
S&F in repairs for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified.
S&F in repairs for 75 mm dia PVC (SWR) grade bends of any radius
S&F in repairs for 75 mm dia PVC (SWR) grade bends with acess door of any radius
S&F in repairs PVC (SWR) branch piece, single (SingleT ) of radius equal or unequal, 75mm dia.
S&F in repairs PVC (SWR) branch piece, single (Single Y) of radius equal or unequal, 75mm dia.
S&F in repairs PVC (SWR) vent cowl, 75mm dia.
M&L PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified.
S&F in repairs vitreous china ware wash hand basin white flat back of size 550x 400 mm with peatestal including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete.
S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts. Make :Prayag Cat No. PIS-50H
S&F in repairs for bib taps long body with flange cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe or for brass fancy for CP brass fancy type 15mm dia. Make :Prayag Cat No. PIS-08H
S&F in repairs two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup. Make : Prayag Cart Part No PIS-12 H
S&F in repairs angular stop cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup. Make :Prayag Cat No. PIS-10 H
S&F in repairs vitreous china ware wash down white water closet pan (pedestal pattern with trap incl connecting to drain and flushing pipe, antisyphonage pipe incl PVC sheet cover etc complete all as specified.
S&F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets complete all as specified.
S & F in repairs Brass chromium plated towel ring with round flange. Make Prayag Cat Part No. BA-11 or equivalent as approved by GE.
S&F in repairs Brass chromium plated toilet paper holder. Make Prayag Cat Part No. BA-38 or equivalent as approved by GE.
S&F in repairs Brass chromium plated Soap dish holder. Make Prayag Cat Part No. BA-45 or equivalent as approved by GE.
S&F in repairs Hand shower (health faucet) with 8mm dia & 1.0mtr long flexible tube with wall hook. Make Prayag Cat Part No. BEA-41 or equivalent as approved by GE.
S&F for 150mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring jointslaid in trenches and in floor etc using synthetic rubber adhesive cement solvent complete all as specified.
S&F in repairs PVC connection 15 mm dia and 600 mm long with both and nuts
S&F for Corner glass self assembly size 300mm with chromium plated bracket guard and railing. Make: Prayag Cat No. BEA-44 or equivalent as approved by GE.
S&F in repairs concealed stop Cock with wall flange incl all fittings complete all as specified and as directed. Make : Prayag cat No-7318 or equivalent as approved by GE.
S&F in repairs CP overhead shower dia 130 mm overhead shower round with revolving joints (with body rotation) & 225mm long arm shower with rabit cleaning system and all fittings. Make - Prayag BS-76 or equivalent as approved by GE.
Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store
Taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store
S& F for 20mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcn including all fittings fixed complete to walls, ceiling or in floor etc
S& F for 25mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcn including all fittings fixed complete to walls, ceiling or in floor etc
S&F for providing 25mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes
Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by engineer- in- charge.
S&F rotational moulded Polyethylene [HDPE] Water Tanks, Triple Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks complete all as specified and as directed by Engineer- in - charge.
S&F for Ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe bore dia of 25mm (Minimum weight 455 gms) complete all as specified and as directed by Engineer- in - charge.
M&L for low density polyethylene (LDPE) pipes of 50mm, pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc
M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over one coat of red oxide primer all as directed.
Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed.
M&L precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) all as specified.
Providing precast cement concrete solid building blocks or slabs Type B1 1:3:6 (20 mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls
M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified.
M&L for preparation of newly plastered wall surfaces with 3mm average thick wall care putty and applying two coat of oil bound distemper over one coat of primer including leveling the surface which undulation found with cement putty etc complete all as specified and directed.
M&L for complete removal of existing treatment on wall by scrapping, washing, cleaning etc with 3mm average thick wall care putty and applying two coats of oil bound distemper over one coat primer including filling of cracks, holes and including leveling the surface which undulation found with wall care putty etc. all as specified.
M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint incl filling cracks, holes using wall care putty complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard).
S & F stainless steel tubing of any diameter of circular, square or rectangular in shape of grade AISI-316 (type Austenitic anticorrosive in nature) as in railings / grills / designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixing in any type of location incl taking down old railing of any description complete all as specified and as directed.
M&L For Excavcation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface
S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. conforming to Fe 410-w.(Gde-E-250 ) quality A complete all as specified and as directed.
Surface excavation hard/dense soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out
Removing excavated soil to a dist n.exc.50m deposited complete all as specified and as directed.
M&L for broken stone or boulders hard core of gauge n.exc. 63 mm deposited, spread and levelled in layers of not exc.15 cm thick, watered and rolled rammed to a true surface.
M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified & directed by Engineer-in-Charge.
M&L for glossy finished machine pressed precast concrete interlocking paver block glossy finished of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80mm thickness, M-40 Grade laid dry to any pattern or profile as directed incl filing to the edges in CM 1:4 all manufacturer's instruction complete all as specified and directed
M&L for sand filling under floors or in foundation including watering and consolidation incl spreading and levelling
M&L for Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.
M&L for 6mm thick X 150mm wide non-asbestos decorative planks (shera planks) fixed to steel members with suitable screws/fasteners/nuts and bolts & washers and applying two coats syenthetic enamel paints complete all as specified and an directed. Make:- Shera Planks or Equivalent
S&F 12mm thick toughened glass in required size duly crystal polished at the edges and with full etched design finalised by GE in different colours fixed with stainless steel brackets of size 50x25mm, 100mm long made out with 3mm thick SS sheet at the top and bottom, stainless hinges& brackets to connecting to SS railings glass to glass, wall to glass connector, magnetic seal, middle seal etc all as directed.
Taking down carefully old unserviceable aluminum/ copper point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches, ceiling roses, lamp holders, pendants, regulators sockets, light fittings, junction/terminal boxes etc; removing from site and making good disturbed surfaces of walls, floors etc., to match with existing surrounding surfaces complete all as specified and as directed.
Taking down old Unserviceable fuse unit / DBs 415 Volt/ 230 volt
Taking down carefully old unserviceable light fittings only and removing from site complete all as specified and as directed.
M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic concealed / surface conduits of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for the following:-
ONE LIGHT/FAN point controlled by one, one way 6 Amps modular switch.
TWO LIGHT points controlled by one, one way 6 Amps modular switch.
ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps modular switch on independent board.
ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps modular switch on same board with other switches.
ONE BELL point controlled by one, one way 6 Amps modular switch.
M&L for Point wiring complete with 4 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC concealed / surface conduits of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 4 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for ONE 16A SOCKET OUTLET point controlled by one, one way 16 Amps modular switch on independent board.
S&F modular switch, one way, one module, single pole, 6 Amps, 240 Volts AC complete all as specified and as directed. Make: Roma (Anchor)/Legrand/Simens/Havells
S&F modular switch, one way, one module, single pole, 16 Amps, 240 Volts AC complete all as specified and as directed. Make: Roma (Anchor)/Legrand/Simens/Havells
S&F modular socket outlet modular type, 1 way, 16 Amps, 3 pin, flush type controlled by one switch 230 Volts AC circuit complete all as specified and as directed. Make: Roma (Anchor)/Legrand/Simens/Havells
S&F modular socket outlet modular type, 1 way, 6 Amps, 3 pin, flush type controlled by one switch 230 Volts AC circuit complete all as specified and as directed. Make: Roma (Anchor)/Legrand/Simens/Havells
S&F modular bell push, 6 amps, 1 module, 230 volts complete all as specified and as directed. Make : Roma (Anchor) / Legrand / Simens / Havells
S&F starter switch of capacity 25 Amps working on 240 Volts AC supply,with 15 Amps plug top and 15 Amps socket suitable for airconditioner complete all as specified and as directed. MAKE: CRAB TREE Cat part No. ACAO252504 or equivalent in ANCHOR/HAVELLS/L&T
M&L for ceiling rose, three terminal, 65x20mm size, PVC/Polycarbonate, insulated body, 6A, 240 volts complete all as specified and as directed.
S&F electric bell, single pole, 230 volts, AC supply complete all as specified and as directed. Make: Roma (Anchor)/Legrand/Simens/Havells
S&F wall mounting fan, 400mm (16") sweep, 65% electricity saving, 50 Watts, 1330 RPM, Air velocity 76CMM (m^3/min) working on 230 volts, 50 Hz, single phase, AC supply, heavy duty, aluminium alloy blades with double ball bearings, sturdy closed mesh guard protection complete with all accessories including provision of 3 core twisted copper conductor cable of suitable gauge with plug top from socket outlet to connector of fan complete all as specified and as directed. MAKE: CG,Cat part no. WM High speed, or equivalent in HAVELLS/USHA/ ALMONARD
S&F modular electronic fan regulator for ceiling fan, step type, 5 speed, AC, 2 module, 120 watts, 240 volts complete all as specified and as directed. Make : Roma (Anchor) / Legrand / Simens / Havells
S&F 65% electricity saving ceiling fan metallic body with smart remote control, toggle operation to control speed 1200mm sweep complete all as specified and as directed. MAKE: Atomberg model No. Efficio white colour/CG/Orient/ Usha
S&F new GI brackets of GI pipe light grade of size 25mm dia including nuts, bolts and washers for building security light complete all as specified and directed.
S&F LED security light fitting, 1x25 watts, 230 volts, 50Hz Ac supply, with high power and high efficiency long life LEDs with built-in electronic driver, unique peanut lens to ensure uniform distribution completely housed, complete all as specified and as directed. MAKE:CROMPTON Cat Part No. LSTS-25-CDL-M/ Philips cat part No. BRP042LED19 CW MR SL PSU GR or its equivalent in Philips/ C&S
S&F recessed mounted 18 watts, down light round shape, LED panel light fitting with ultra bright luminarie comprising thermally conductive material, pre wired with high efficiency electronic driver with all accessories and fixing arrangements for fixing the light fitting complete all as specified and as directed. MAKE: PHILIPS Cat part No. Astra Max Metal Panel/ CROMPTON GREAVES Cat Part LSCRM-18W-CDL/NW/WW or equivalent in HAVELLS/C&S
Supplying, fixing and testing surface mounting LED light fittings 18 watts (Yellow /White colour) as required at site) including all accessories and fixing arrangements for fixing the light fitting (White/yellow colour of light as required at site) complete all as specified and directed. MAKE : Philips Model No : Star Surface dimension 234-234-25mm/C&S/CG/Havells.
S&F and testing Tube light fittings LED 20 watts 4 feet including all accessories and fixing arrangements complete all as specified and directed Make :CG Cat Part No : CCS-100-20-65-HL2-DP-NWH/ Philips/Havells
Supplying, fixing and testing tube light fittings LED 10 watts 2 feet including all accessories and fixing arrangement for fixing the light fitting complete all as specified and as directed MAKE: CG/Philips/Havells
Taking down old aluminium sub main wiring of any size complete all as specified and as directed by Engineer-in-Charge..
M&L for Sub main wiring complete with two runs (1P+1N) of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Two runs of 6.0 Sqm copper conductor, One run of 6.0 Sqmm copper conductor as earth wire and and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.
M&L for Sub main wiring complete with two runs (1P+1N) of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Two runs of 4.0 Sqm copper conductor, One run of 4.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.
S&F MCCB DB sheet steel enclosure, VTPN, 4-way, double door, 415 Volts with 200 Amps rated bus bar, IP-43 protection suitable for incoming MCCB 125 Amps and outgoing MCB TP/SP, enclosed in standard steel sheet flush mounting type, factory fabricated complete all as specified and as directed. MAKE: L&T/ LEGRAND/SCHEIDER/ INDO ASIAN/ HAVELLS
S&F SPN DB sheet metal enclosure double door suitable (IP-43) Protection, 8 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete. Make : Havells/L&T/Indo Asian
S&F MCCB, 4 pole, 125 Amps, 50Hz, 25KA rupturing capacity, 415 Volts adjustable type with thermal and magnetic release complete all as specified and as directed. MAKE: INDO ASIAN/ L&T/ LEGRAND/ HAVELLS
S&F MCB, SPN, "C" series, 240 volts, 40 Amps, 10 KA rupturing capacity complete all as specified and as directed. Make : Havells/L&T/Indo Asian
S&F MCB, SP, "C" series, 240 volts, 6 to 32 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811122 to 811129 or equivalent in L&T/ LEGRAND/ ABB/ HAVELLS
M&L for earthing complete with GI earth plate electrode of size 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5m below normal ground level connected to 4mm dia GI earth wire as earth lead connected by means of bolts, nuts, washers and check nuts made out of galvanised iron or steel all as shown on electrical plate No. 3 of SSR Part-I connected to common earth dolly including testing on completion complete all as specified and directed. NOTES: 1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. 2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.
M/s Ramesh Lal
CHANDER SEKER ENTERPRISE
SKV Engineering
DEEPAK AGENCIES
S K ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .