COMPLETION OF INCOMPLETE WORK FOR PROVN OF

Amount

Sch 'A' Part-I (BuIlding Works) Note : (i) This Sch is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col 5 signifies this fact only. (ii) Rates to be Quoted by the Bidders based on Left Over Items / Works to be executed for entire completion of Buildings in all respects as per CA provisions. (iii) The scope of the balance work as assessed by the Department in respect to Schedule ‘A’ Part-I is attached at Annexure 'A' to Schedule ‘A’ Notes (Yard Stick) for guidance only. The drawing for these buildings / structures are enclosed for entire completion of the work and balance scope of work for these building are to be completed as per drawing. Bidders are advised to visit the site and assess the actual quantum of the incomplete building work and quote their rates accordingly for entire completion of building work and making good defective parts of building work & services work (as assessed by the Department attached at Annexure ‘B’ to Schedule ‘A’ Notes) and to be completed in all respects as per CA provisions. Irrespective of whether a bidder has actually visited the site of the work or not, it shall be presumed that the bidder has visited and inspected the site of the work and made his own assessment regarding the scope of the work in changing the serviceability or otherwise of the buildings available at site. No claim on this account shall be entertained at a later stage and no extra shall be paid to the contractor. Bidders are requested to keep this in view while quoting their rates to avoid any contractual issue at a later stage.

Completon of Incomplete Building Work for Construction of a building of triple storied for Office Accn, Fd Fmn HQ, Signal Centre & Parking with all fittings and fixtures etc complete all as specified and as shown on drawings.

Completon of Incomplete Building Work for Construction of a building of triple storied for SM Barrack, Cook House, Dinning Hall and Ors Institute with all fittings and fixtures etc complete all as specified and as shown on drawings.

Completon of Incomplete Building Work for Construction of a building of double storied for Officers Mess with all fittings and fixtures etc complete all as specified and as shown on drawings.

BLANK

BLANK

Completon of Incomplete Building Work for Construction of a building of single storey for Captain Qtrs with all fittings and fixtures etc complete all as specified and as shown on drawings.

BLANK

BLANK

BLANK

Completon of Incomplete Building Work for Construction of a building of Single storey for Garage for Tatra (12 Nos.) with all fittings and fixtures etc complete all as specified and as shown on drawings.

BLANK

BLANK

BLANK

BLANK

BLANK

BLANK

BLANK

Completon of Incomplete Building Work for Construction of Sentry Post with RCC framed structure including all fittings and fixtures, etc complete all as specified and as shown on drawings.

Construction of Refuse Bin with all fittings and fixtures etc complete all as specified and shown on drawings.

Construction of Alarm Post with all fittings and fixtures etc complete all as specified and shown on drawings.

Construction of Fire Point with all fittings and fixtures etc complete all as specified and shown on drawings.

Construction of Flag Staff with base with all fittings and fixtures etc complete all as specified and shown on drawings.

Total

Lumpsum price worked out by the tenderer/ bidder for SITE CLEARENCE, AREA DEVELOPMENT, EARTH WORK AND EXCAVATION as listed in Schedule ‘A’ Part-II on Serial Page No. 40.

Lumpsum price worked out by the tenderer/ bidder for INTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-III on Serial Page No. 44.

Lumpsum price worked out by the tenderer/ bidder for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-IV on Serial Page No 47.

Lumpsum price worked out by the tenderer/ bidder for ROAD/ PATH/ CULVERT as listed in Schedule ‘A’ Part-V on Serial Page No. 53.

Lumpsum price worked out by the tenderer/ bidder for AREA DRAINAGE as listed in Schedule ‘A’ Part-VI on Serial Page No. 56.

Lumpsum price worked out by the tenderer/ bidder for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part-VII on Serial Page No.58.

Lumpsum price worked out by the tenderer/ bidder for SECURITY FENCING AND GATE as listed in Schedule ‘A’ Part-VIII on Serial Page No. 64.

Lumpsum price worked out by the tenderer/ bidder for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-IX on Serial Page No.68.

Lumpsum price worked out by the tenderer/ bidder for EXTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-X on Serial Page No. 72.

Lumpsum price worked out by the tenderer/ bidder for HARD STANDING as listed in Schedule ‘A’ Part-XI on Serial Page No.75.

Lumpsum price worked out by the tenderer/ bidder for REFRIGERATOR AND WATER HEATER as listed in Schedule ‘A’ Part-XII on Serial Page No.76.

Lumpsum price worked out by the tenderer/ bidder for DG SET as listed in Schedule ‘A’ Part-XIII on Serial Page No.77.

Schedule ‘A’ Part-XIV (MISCELLANEOUS ITEMS) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 signifies this fact only.

(INTERNALELECTRIFICATION) Material and labour for point wiring with 1.5sqmm (nominal area) PVC insulated and unsheathed single core FRLS (conforming to IS-694) copper cable 1100 volts grade with multi stranded copper conductor in and including concealed PVC rigid conduit heavy grade of adequet size dia with all fittings and accessories including 1.6mm thick sunk MS pressed steel terminal boxes of appropriate size with 3.0mm thick plastic laminated sheet top cover with cadmium plated iron screws complete including PVC insulated and unsheathed FRLS (conforming to IS-694) single core multi stranded copper conductor cable of size 1.5sqmm green colour as earth continuty conductor connected to common earth dolly for one light/ fan point controlled by one, one way switch complete all as specified and as directed.

BLANK

Material and labour for point wiring with 1.5sqmm (nominal area) PVC insulated and unsheathed single core FRLS (conforming to IS-694) copper cable 1100 volts grade with multi stranded copper conductor in and including surface mounted metal conduit heavy grade of adequet size with all fittings and accessories including 1.6mm thick sunk MS pressed steel terminal boxes of appropriate size with 3.0mm thick plastic laminated sheet top cover with cadmium plated iron screws complete including PVC insulated and unsheathed FRLS (conforming to IS-694) single core multi stranded copper conductor cable of size 1.5sqmm green colour as earth continuty conductor connected to common earth dolly for one bell point for controlled by one, one way bell push botton switch complete all as specified and as directed.

Material and labour for point wiring with 1.5sqmm (nominal area) PVC insulated and unsheathed single core FRLS (conforming to IS-694) copper cable 1100 volts grade with multi stranded copper conductor in and including concealed PVC rigid conduit heavy grade of adequet size with all fittings and accessories including 1.6mm thick sunk MS pressed steel terminal boxes of appropriate size with 3.0mm thick plastic laminated sheet top cover with cadmium plated iron screws complete including PVC insulated and unsheathed FRLS (conforming to IS-694) single core multi stranded copper conductor cable of size 1.5sqmm green colour as earth continuty conductor connected to common earth dolly for one 5/6 Amps socket outlet points controlled by one, one way switch on independent board complete all as specified and as directed.

All as per item No. 14.04 above but one 5/6amps socket outlet point on the same board with other switches complete all as specified and as directed.

Material and labour for point wiring with 2.5sqmm (nominal area) PVC insulated and unsheathed single core FRLS (conforming to IS-694) copper cable 1100 volts grade with multi stranded copper conductor in and including concealed PVC rigid conduit heavy grade of adequet size with all fittings and accessories including 1.6mm thick sunk MS pressed steel terminal boxes of appropriate size with 3.0mm thick plastic laminated sheet top cover with cadmium plated iron screws complete including PVC insulated and unsheathed FRLS (conforming to IS-694) single core multi stranded copper conductor cable of size 1.5sqmm green colour as earth continuty conductor connected to common earth dolly for one 15/16 Amps socket outlet points controlled by one, one way switch on independent board complete all as specified and as directed.

Material and labour for point wiring with 4sqmm (nominal area) PVC insulated and unsheathed single core FRLS (conforming to IS-694) copper cable 1100 volts grade with multi stranded copper conductor in and including concealed PVC rigid conduit heavy grade of adequet size with all fittings and accessories including 1.6mm thick sunk MS pressed steel terminal boxes of appropriate size with 3.0mm thick plastic laminated sheet top cover with cadmium plated iron screws complete including PVC insulated and unsheathed FRLS (conforming to IS-694) single core multi stranded copper conductor cable of size 4sqmm green colour as earth continuty conductor connected to common earth dolly for one 15/16 Amps socket outlet points controlled by one, one way switch on independent board complete all as specified and as directed.

Supply and fixing switch flame proof rotary type with terminal box in 5/6 amps single pole 250 volts complete all as specified and as directed.

Supply and fixing power unit for 25A, with start stop switch inbuilt overload tripping system, single phase, AC 230V, 50 Hz complete with cover plate. Make-Crabtree, model Athena, cat No-ACAO252504 or equivalent make of model as specified in Appendix 'A' here-in-after.

Supply and fix surface & wall mounted LED batten 4 feets with 1x20 w indoor decorative luminaries with and including Electronic driver and 1 x20 Watt LED lamp, pre-wired including necessary electric connection from ceiling rose to light fitting, conforming to the following specifications: - (i) System Watts/lumens: - Max 20 W/Total system lumen not less than 2000 Lm. (ii) Housing: - Extruded polycarbonate. (iii) IP rating: - IP 20. (iv) Front cover: - Acrylic/polycarbonate cover. (v) Mounting: - Suitable for wall/ceiling mounting. (vi) Finish: - Smooth finish. (vii) Lamp: - High bright LED. (viii) System Efficacy (lm/Watt): - Not less than 100 lm/watt. (ix) Colour temperature: - Not less than 5700 K. (x) Colour rendering index (CRI): - Not less than 80. (xi) Life: - Not less than 25000 hrs of operation. (xii) Optics: - Designed for optimum light distribution. (xiii) Control gear: - Inbuilt electronic driver with APFC, PF not less than 0.95, and THD not more than 20% of the standard operating voltage 180-270V Ac, 50 Hz. (xiv) Surge protection: - Inbuilt surge protection minimum 2 KV. (xv) Heat sink: - As per OEM's design. Note:- Bidder has to compulsorily submit the LM-79 and LM-80 and third part NABL accredited lab test report conforming to technical specifications and consolidated lab report for the offered LED has to be structured in the same sequence.

Supply and fix surface & wall mounted LED batten 2 feets with 1x10 w indoor decorative luminaries with and including Electronic driver and 1 x10 Watt LED lamp, pre-wired including necessary electric connection from ceiling rose to light fitting, conforming to the following specifications: - (i) System Watts/lumens: - Max 10 W/Total system lumen not less than 1000 Lm. (ii) Housing: - Extruded polycarbonate. (iii) IP rating: - IP 20. (iv) Front cover: - Acrylic/polycarbonate cover. (v) Mounting: - Suitable for wall/ceiling mounting. (vi) Finish: - Smooth finish. (vii) Lamp: - High bright LED. (viii) System Efficacy (lm/Watt): - Not less than 100 lm/watt. (ix) Colour temperature: - Not less than 5700 K. (x) Colour rendering index (CRI): - Not less than 80. (xi) Life: - Not less than 25000 hrs of operation. (xii) Optics: - Designed for optimum light distribution. (xiii) Control gear: - Inbuilt electronic driver with APFC, PF not less than 0.95, and THD not more than 20% of the standard operating voltage 180-270V Ac, 50 Hz. (xiv) Surge protection: - Inbuilt surge protection minimum 2 KV. (xv) Heat sink: - As per OEM's design. Note:- Bidder has to compulsorily submit the LM-79 and LM-80 and third part NABL accredited lab test report conforming to technical specifications and consolidated lab report for the offered LED has to be structured in the same sequence.

Supplying and fixing LED Bulb 5W, Ac 230V, 50 Hz pin type complete with following specification:- (i) System Watts/lumens: - Max 5 W/Total system lumen not less than 500 Lm. (ii) Housing: - Extruded polycarbonate. (iii) IP rating: - IP 20. (iv) Front cover: - Acrylic/polycarbonate cover. (v) Mounting: - Suitable for wall/ceiling mounting. (vi) Finish: - Smooth finish. (vii) Lamp: - High bright LED. (viii) System Efficacy (lm/Watt): - Not less than 100 lm/watt. (ix) Colour temperature: - Not less than 5700 K. (x) Colour rendering index (CRI): - Not less than 80. (xi) Life: - Not less than 25000 hrs of operation. (xii) Optics: - Designed for optimum light distribution. (xiii) Control gear: - Inbuilt electronic driver with APFC, PF not less than 0.95, and THD not more than 20% of the standard operating voltage 180-270V Ac, 50 Hz. (xiv) Surge protection: - Inbuilt surge protection minimum 2 KV. (xv) Heat sink: - As per OEM's design.

Supply and fix surface & wall mounted LED building street light fittings with 36 w indoor decorative luminaries with and including Electronic driver and LED lamp, pre-wired including necessary electric connection from ceiling rose to light fitting, with necessary standard GI brackets, clamps and nut bolts fixed on wall conforming to the following specifications: - (i) System Watts/lumens: - Max 36 W/Total system lumen not less than 3600 Lm. (ii) Housing: - Extruded polycarbonate. (iii) IP rating: - IP 20. (iv) Front cover: - Acrylic/polycarbonate cover (v) Mounting: - Suitable for wall/ceiling mounting. (vi) Finish: - Smooth finish. (vii) Lamp: - High bright LED. (viii) System Efficacy (lm/Watt): - Not less than 100 lm/watt. (ix) Colour temperature: - Not less than 6500 K. (x) Colour rendering index (CRI): - Not less than 80. (xi) Life: - Not less than 25000 hrs of operation. (xii) Optics: - Designed for optimum light distribution. (xiii) Control gear: - Inbuilt electronic driver with APFC, PF not less than 0.95, and THD not more than 20% of the standard operating voltage 180-270V Ac, 50 Hz. (xiv) Surge protection: - Inbuilt surge protection minimum 2 KV. (xv) Heat sink: - As per OEM's design. Note:- Bidder has to compulsorily submit the LM-79 and LM-80 and third part NABL accredited lab test report conforming to technical specifications and consolidated lab report for the offered LED has to be structured in the same sequence.

Supply and fix Energy saving, environment friendly and robust open type vertical Highbey LED luminaire with High power COB LED as light source, 90W with the following specifications: - (i) System Watts/lumens: - Max 90 W/Total system lumen not less than 9000 Lm. (ii) Housing: - Extruded polycarbonate/ metal with heat sink. (iii) IP rating: - IP 20. (iv) Front cover: - No cover but with reflector (v) Mounting: - Suitable for wall/ceiling mounting with necessary hanging arrangement. (vi) Finish: - Smooth finish. (vii) Lamp: - High bright COB LED. (viii) System Efficacy (lm/Watt): - Not less than 100 lm/watt. (ix) Colour temperature: - Not less than 6500 K. (x) Colour rendering index (CRI): - Not less than 80. (xi) Life: - Not less than 25000 hrs of operation. (xii) Reflector: - Designed for optimum light distribution. (xiii) Control gear: - Inbuilt electronic driver with APFC, PF not less than 0.95, and THD not more than 20% of the standard operating voltage 180-270V Ac, 50 Hz. (xiv) Surge protection: - Inbuilt surge protection minimum 2 KV. (xv) Heat sink: - As per OEM's design. Note:- Bidder has to compulsorily submit the LM-79 and LM-80 and third part NABL accredited lab test report conforming to technical specifications and consolidated lab report for the offered LED has to be structured in the same sequence.

Supply and fix surface mounted LED fittings 2X2 feets square type with 36 w indoor decorative luminaries with and including Electronic driver and LED lamp, pre-wired including necessary electric connection from ceiling rose to light fitting, conforming to the following specifications: - (i) System Watts/lumens: - Max 36 W/Total system lumen not less than 3600 Lm. (ii) Housing: - Extruded polycarbonate. (iii) IP rating: - IP 20. (iv) Front cover: - Acrylic/polycarbonate cover (v) Mounting: - Suitable for ceiling mounting. (vi) Finish: - Smooth finish. (vii) Lamp: - High bright LED. (viii) System Efficacy (lm/Watt): - Not less than 100 lm/watt. (ix) Colour temperature: - Not less than 5700 K. (x) Colour rendering index (CRI): - Not less than 80. (xi) Life: - Not less than 25000 hrs of operation. (xii) Optics: - Designed for optimum light distribution. (xiii) Control gear: - Inbuilt electronic driver with APFC, PF not less than 0.95, and THD not more than 20% of the standard operating voltage 180-270V Ac, 50 Hz. (xiv) Surge protection: - Inbuilt surge protection minimum 2 KV. (xv) Heat sink: - As per OEM's design. Note:- Bidder has to compulsorily submit the LM-79 and LM-80 and third part NABL accredited lab test report conforming to technical specifications and consolidated lab report for the offered LED has to be structured in the same sequence.

Supply and fix surface & wall mounted LED mirror light fittings with 10 w indoor decorative luminaries with and including Electronic driver and LED lamp, pre-wired including necessary electric connection from ceiling rose to light fitting, conforming to the following specifications: - (i) System Watts/lumens: - Max 10 W/Total system lumen not less than 1000 Lm. (ii) Housing: - Extruded polycarbonate. (iii) IP rating: - IP 20. (iv) Front cover: - Acrylic/polycarbonate cover (v) Mounting: - Suitable for wall/ ceiling mounting. (vi) Finish: - Smooth finish. (vii) Lamp: - High bright LED. (viii) System Efficacy (lm/Watt): - Not less than 100 lm/watt. (ix) Colour temperature: - Not less than 5700 K. (x) Colour rendering index (CRI): - Not less than 80. (xi) Life: - Not less than 25000 hrs of operation. (xii) Optics: - Designed for optimum light distribution. (xiii) Control gear: - Inbuilt electronic driver with APFC, PF not less than 0.95, and THD not more than 20% of the standard operating voltage 180-270V Ac, 50 Hz. (xiv) Surge protection: - Inbuilt surge protection minimum 2 KV. (xv) Heat sink: - As per OEM's design. Note:- Bidder has to compulsorily submit the LM-79 and LM-80 and third part NABL accredited lab test report conforming to technical specifications and consolidated lab report for the offered LED has to be structured in the same sequence.

Supplying and fixing fluorescent tube light fittings, 1x36 watts flame proof type FLP-WP made of aluminium alloy LM6 with electronic ballast bipin holders, connector block, etc. and all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. (Make:- Crompton Greaves model No. EXTL140or equvalent as per Appendix 'A' here-in-after.)

Supplying and fixing Brush Less DC (BLDC) ceiling fan with the following specifications: - ((i) Motor: - Brushless DC 32 W, with operating voltage 140V-240V AC, 50 Hz.. (ii) Max RPM: - 360 RPM. (iii) Sweep: - 1200mm. (iv) Colour:- White. (v) Remote control operated. (vi) 5 STAR energy saving rating complete all as specified and as directed.

ditto all per item No. 14.18 above but 1500mm sweep ceiling fan complete all as specified and as directed. (Note for item No. 14.18 for 14.19:- Regulator is not required for this type of ceiling fan will be controlled by remote only.)

Supplying and fixing exhaust fan noiseless square type metal body case , 250mm sweep with polycarbonate blades flush mounting with louvers, AC single phase 230/240 volts, 50 Hz including necessary fixing accessories and make good of surfaces complete all as specified and as directed. (Make:- Usha model No. CRISP AIR or equvalent as per Appendix 'A' here-in-after.)

Supplying and fixing wall fan 300mm sweep with roter switch, AC single phase 230/240 volts, 50 Hz including necessary fixing accessories and make good of surfaces complete all as specified and as directed. (Make:- Usha model No. HELIX HI-SPEED or equvalent as per Appendix 'A' here-in-after.)

Supplying and fixing MCCB 125 Amps, capacity 25kA, 4 pole, 415 volts (Adjustable thermal type & fixed magnetic setting) complete all as specified and as directed.

Material and labour for sub main wiring with four runs of single core 4 Sqmm (nominal area) PVC insulated copper conductor FRLS (conforming to IS-694), stranded, unsheathed 1100 volts grade in PVC concealed rigid conduit (heavy grade) of adequit size with all fittings and conduit accessories concealed type including two runs 4 Sqmm single core unsheathed stranded copper conductor cable FRLS (conforming to IS-694) as earth wire complete all as specified and as directed.

Material and labour for sub main wiring with four runs of single core 6 Sqmm (nominal area) PVC insulated copper conductor FRLS (conforming to IS-694), stranded, unsheathed 1100 volts grade in PVC concealed rigid conduit (heavy grade) of adequit size with all fittings and conduit accessories concealed type including two runs 6 Sqmm single core unsheathed stranded copper conductor cable FRLS (conforming to IS-694) as earth wire complete all as specified and as directed. {Note for item No. 14.23 & 14.24:-(i) Four runs of cable with two runs earth wire and PVC conduit shall be measured as one unit length. (ii) Extra length of cable required for connection to DBs shall be deemed to be included in the unit quoted rate and shall not be measured separately. (iii) Earth wire shall run inside the conduit. (iv) Suitable color code of wire must be ensure for phase/ neutral/ earth.}

Material and labour for sub main wiring with two runs of single core 4 Sqmm (nominal area) PVC insulated copper conductor FRLS (conforming to IS-694), stranded, unsheathed 1100 volts grade in PVC concealed rigid conduit (heavy grade) of adequit size with all fittings and conduit accessories concealed type including one run 4 Sqmm single core unsheathed stranded copper conductor cable FRLS (conforming to IS-694) as earth wire complete all as specified and as directed. {Note:-(i) Two runs of cable with one run earth wire and PVC conduit shall be measured as one unit length. (ii) Extra length of cable required for connection to DBs shall be deemed to be included in the unit quoted rate and shall not be measured separately. (iii) Earth wire shall run inside the conduit. (iv) Suitable color code of wire must be ensure for phase/ neutral/ earth.}

Supply and fixing tamper proof electronic energy meter, single phase, AC 440V, 50 Hz, with accuracy class 1, LED indicator presence for each phase, high surge withstand capacity up to 8 KV, polycarbonate enclosure, Anti tamper proof, 5-30A rating with necessary sheetmetal meter box complete all as specified and as directed.

(INTERNAL WATER SUPPLY) Supply and fixing brass CP wall mixer (three-in-one) for hot, cold and shower water supply facilities, screwed down for 15 mm dia GI pipe including 1.5m long PVC flexible pipe with hand shower complete all as specified and as directed.

Supply and fixing Health faucet (Hygenic shower) for 15mm dia pipe with 1.5m long PVC flexible pipe complete all as specified and as directed.

(EXTERNAL WATER SUPPLY) Drilling of bore of size 200 mm dia up to 200 mtr depth and beyond by vehicle mounted direct rotary or reverse rotery Rig mechanical system for injection well in any kind of soil strata including hard stone / boulders complete all as specified and as directed.

BLANK

ditto as per Item No. 14.30 above but in two steps up to 450mm for depth exceeding 60 mtrs complete all as specified and as directed.

BLANK

BLANK

Supplying assembling lowering and fixing low carbon galvanized (LCG) steel strainer pipe 200 mm nominal bore of wall thickness 7.00 mm cage type wire wound screen 'V' shaped profile in suitable length having slots of size 0.75 mm width including necessary and coupling complete all as specified and as directed.

Supply and packing pea size stone gravel of size 2 mm to 6 mm all around casing pipe and slotted pipe complete all as specified and as directed.

BLANK

BLANK

BLANK

BLANK

M&L for Open Well water filled submersible pump set, 3 Ph, 50 Hz, 415V AC, with high operational efficiency, performance and durability, wide voltage range, super finished water lubricated bush bearings, dynamically balanced rotating parts, CED coated components, with less speed drop motors with Teflon bearing comprising with the following requirements: - (a) Head- 15m, (b) Discharge: - 13 Ltrs per second/780 Ltrs per minute., (c) Outlet discharge pipe dia: -100mm, (d) Voltage range: - 350 to 440V AC, 50 Hz, (e) Pump Bowl, suction and delivery:- made with Cast iron, C.I.FG-200 Grade. Note-I: - These pumps will be installed at raw water reservoir/Tank as one run/one standby basis and will feed the water to Iron removal plant. Necessary valves/pipe lines needs to be installed which will be measured and paid in the relevant item. If the outlet pipe dia as mentioned not matched with the pump discharge outlet dia the necessary reducer shall also be installed which will be measured and paid separately. Note-II: - The above pump set will be controlled by electronic type controller with stainless steel probe/sensor and float switch for automatic operation and a PLC based control panel for automatic operation with necessary automatic operation time setting, with necessary power cables, control cables, starter and connection all are included in the item rate.

BLANK

Supplying, laying and fixing or passing through pipes or laid under floor or through walls etc. jointing and testing of PVC insulated submersible cable 10 sq mm 3 core flat LT 1100 volt graded heavy duty ISI marked with copper conductor and overall served with an outer sheath of PVC complete all as specified and as directed.

Supply and fixing air release valve PN-1.6 size of 80 mm dia both ends flanged heavy duty including packing materials, nuts, bolts and washers, etc and testing complete all as specified and as directed.

Material and labour for CI reducer 50/100mm with flanged both side fixed with necessary gaskets, nuts and bolts complete all as specified and as directed.

Material and labour for CI reducer 100/150mm with flanged both side fixed with necessary gaskets, nuts and bolts complete all as specified and as directed.

Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron strip of size 32 x 6mm as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 40mm dia GI

medium grade earth lead protection pipe and pre-cast earth pit cover made of RCC (1:1.5:3) type A1 duly reinforced with 8mm dia TMT bar @150 c/c both ways, one lifting handle made of 10mm dia TMT bar embedded in cover slab and cover, wire, copper lugs etc mesh, chorcoal and common salt in alternate layer of 15cm thick complete all as specified and directed. {NOTE:- (i) Each protection pipe and earth lead upto and including 7.50m length is deemed to be included in unit rate of of this item. (ii) External Water Supply - 06 Nos., External Electric Supply - 20 Nos & DG Set - 04 Nos Earthing.}

Supply and laying, jointing and testing of ductile iron pipe 150mm dia single socketed of class K-7 laid in trenches complete all as specified and as directed.

Supply and laying, jointing and testing of ductile iron pipe 100mm dia single socketed of class K-7 laid in trenches complete all as specified and as directed.

BLANK

Supply, installation, commissioning and testing of 100mm sluice valve of cast iron body flanged and drilled conforming to IS-14846, PN-1.0 with brass spindle with hand wheel including all jointing materials such as nuts, bolts, washers, & fibre/ rubber gasket as required complete all as specified and as directed.

BLANK

Material and labour for ductile iron fittings such as bends (any radius), tapers, tee piece collers, socket, etc . and any type of branch, cross, increasing, decreasing or double socket or socketed, caps and plugs suitable for upto 200mm bore ductile iron pipe complete all as specified and as directed.

Material and labour for construction of brick masonary valve pit (of internal dimension 900 x900 x 600mm ) with burnt-brick work in cement mortar 1:6 and 10mm thick plastering in cement morter 1:4 and PCC M-7.5 (nominal mix) using 40mm graded agreegate in floor bed including pit cover made out of 3mm thick MS sheet with locking arrangement hinged with 50x50x6mm angle iron frame embeded in PCC M-10 using 20mm graded aggregate for chamfering and pit cover painted with two coats of synthetic enamel paint over a coat of red oxide primer. Excavation and earthwork shall be in soft/loose soil and disposal of surplus earth shall be not exc 50m. All other details shall be as per drawing No CZ/TD/EM/531, Sheet No. 1/1.

Material and labour for construction of brick masonry valve pit of size 600x600x600 mm (inside dimension) with brick work in cement motor (1:4) including excavation and earth work, concrete work 3mm thick, MS sheet cover with locking arrangement hinges and handle, painted to all surfaces with two coats of black bituminous paint over a one coat of primer Excavation and earthwork shall be in soft/loose soil and disposal of surplus earth shall be not exc 50m. All other details shall be as per drawing No MISC/182, Sheet 1/1.

BLANK

BLANK

Supply, installation, commissioning and testing of FRP cylindrical underground tank including necessary civil work requires as per manufacturer recommendations complete including all inlet outlet vent and overflow connections and provn of fixing of open well submersible pumps etc of capacity 25000 Ltrs complete. (Note: - Take needs to be interconnected and pumps will be fitted in one tank only.)

Material and labour for chemical dosing pump operate on single head gear motored adjustable with self priming suitable for interchangeable pump tubes and sub assemblies, mechanical control adjustable from 5% to 100% with non clogging capacity, pumping against pressure of up to 100 psl, mounting (vertical or horizontal) complete with 100 ltrs PE/FRP tank with lid, level Gauge and rain shed cowl. Make:- Declibac cat 96 NGQ 51 or equivalernt make as specified in Appendix 'A' here-in-after. (Note:- (i). Lid should have port hole of pouring solution including provision for mounting dozing pump and all accessories. (ii). The item rate including Rain cowl made with angle iron frame and FRP sheet including one number socket 5 Amps and wiring from main panel to cowl. (iii) Dozing machine shall be installed after Iron removal plant complete all as specified and as directed.

Design, supply, install, testing and commissioning Iron removal pressure feed type filtration plant 8000 GPH to with stand pressure 10 Kg/Sq cm with catalytic and filter media (as required size and grade / mesh to obtain potable water recommended parameters as per WHO) including MS frontal pipe (duly welded), Cocks, valves, (inlet outlet, back wash, rinse, bypass complete as per manufacturer's instruction). Provision of main hole Hand hole strainer including air vent system, coagulant feeder with accessories, oxidation chamber with media, (MnO2) with all accessories suitable capacity with all fitting fixture, pressure gauges, RCC/PCC foundation as per OEM recommendation. Drainage system and connected to rising and delivery system including painting and writing complete. The technical details of Oxidation chamber and Multigrade filter are as given below:-

(A) Oxidation Chamber- (i) Feed Flow - 40 M³/Hr. (ii) Operating pressure - 3.5 kg/cm². (iii) Max. allowable pressure drop - 0.5 Kg/cm. (iv) MOC of vessel - MS. (v) Frontal Pipeline Size - 150/100mm. (vi) Media type - Manganese-di-oxide. (vii) Thickness in mm (shell and dish-ends) - 6 mm. (viii) Media Quantity - 600 Kg. (B) Multigrade Filter- (i) Flow rate - 40 M³/Hr. (ii) Operating pressure - 3.5-5.5 kg/cm². (iii) Max. allowable pressure drop - 0.5 Kg/cm². (iv) Continuous duty cycle - 48 Hrs. (v) Backwash - 20 Min. (vi) Rinsing - 10 Min. (C) Filtering Media Details- (i) Media Type - Mixed sand. (ii) Depth of sand - 2800 Kg. (iii) Depth of Gravels support - 2000 Kg. (iv) Guaranteed life of filtering media - One year. (D) Vessels Details- (i) Type Cylindrical - Vertical. (ii) Dimension in mm (DIA X HOS) - 1600 X 2300 mm. (iii) Free board for back wash - 50%. (iv) Materials - MS. (v) Thickness in mm (shell and dish-ends) - 8-10mm. {Note:-- Rate deemed to be included with the followings:- (a) Raw water and treated water tested report of all parameter from National Test House Salt Lake. (b) Training to DEL Staff with required material and maintaining log book and other register as directed. (c) Electronic flow meter-01 including necessary wiring complete. (d) Butter fly and gate valves as required.

EXTERNAL ELECTRIC SUPPLY BLANK

BLANK

BLANK

BLANK

BLANK

Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cm x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron or steel using GI or steel wire 4 mm dia as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI medium grade earth lead protection pipe and pre-cast earth pit cover 50mm thick made of RCC (1:1.5:3) type A1 duly reinforced with 8mm dia TMT bar @150 c/c both ways, one lifting handle made out of 10mm dia TMT bar 250mm long embedded in cover slab and cover, wire, copper lugs etc mesh, chorcoal and common salt in alternate layer of 15cm thick including taking down old one eathing complete all as specified and directed.

BLANK

BLANK

BLANK

BLANK

BLANK

BLANK

BLANK

BLANK

BLANK

BLANK

Material and labour for Drop Out (DO) fuse assembley for 11 KV, 3 Phase system, 15A dropout fuse with the following specifications: - (a) Out door, Drop Out expulsion type shall conform to IS:9385 (part I&II) following the latter ammendments. (b) Rated Voltage - 12 KV. (c) Single vent having front connected fuse carrier suitable for angle mounting. (d) All ferrous parts shall be hot deep galvanised. (e) The fuse carrier assembley shall be made with bronze casting opening (pull ring) type suitable for operation with Hook stick from the ground level to pull out or close the fuse carrier b manual operation. (f) The fuse base shall be bird proof with single unit with two Nos. porceline insulators with a creep edge distance (to earth) not less than 320mm from the 11 KV line. The porceline insulators, the beam strength shall not be less than 1000 KG (i.e. mechanical falling load).

(g) The fuse tube shall be made of fiber glass coated with ultraviolet inhibitor on the outer surface and having arc quenching bone fibre liner inside. The tube shall have bursting strength to sustain high pressure of the gases during fault interruption. The inside diameter of the fuse tube shall be 17.5mm. The solid cap of the fuse carrier shall clamp the button head of the fuse link, closing the top end of the fuse tube and allowing only the downward venting during fault interruption. (h) The fuse and insulators assemblies shall be provided with suitable arrangement for mounting on 75x 40mm or 100x 50mm channel cross arm in such a way that the centre line of the fuse base is at an angle of 15° to 20° from the vertical and shall provide the necessary clearence from the supports. (j) The terminal connection of the cutout shall be provided with two aluminium alloy connectors conforming to IS 617-1975 and ammendmends.

REFRIGERATOR AND WATER HEATER Supply, installation, commissioning of refrigerator single door, electric driven (single phase) 230V AC, 50 Hz, 308 - 315 ltrs capacity, conforming to IS 15750 (2006) for frost free, with power saver compressor with minimum BEE 4 star rating complete all as specified and as directed. (Make:- Godrej model No. RT EON 311 SC or equivalent model of make as specified in Appendix ‘A’ here-in-after.).

Supply, installation, commissioning of refrigerator single door, electric driven (single phase) 230V AC, 50 Hz, 192 - 210 ltrs capacity, conforming to IS 1476 for direct cool with power saver compressor with minimum BEE 4 star rating complete all as specified and as directed. (Make:- Godrej model No. RD-EDGE DIVA 192 PPS or equivalent model of make as specified in Appendix ‘A’ here-in-after.).

Supply, installation, commissioning and testing of water heater storage type, electric driven, capacity of 25 litres, single phase, 230V AC 50 Hz, closed type ISI marked, vertical wall mounting, with ABS plastic outer cover and stainless steel inner container, BEE 5 star rated. Complete with all connection. (Make:- Havells model No. ADORINE DIGITAL or equivalent model of make as specified in Appendix ‘A’ here-in-after.).

Supply and fixing PTMT connection pipe (Heavy duty) of ISI marked for water heater Hot and Cold 15mm dia upto 300mm length complete all as specified and as directed.

DG SET Supply, erecting, testing and commissioning of Factory assembled silent (Sound proof acoustic enclosure meeting CPCB Norms) type Diesel Engine Driven Generating Set capable of delivering 160 KVA, Water coolant cooled, 415 Volts (AC three phase, 4 wire system of supply) 50 HZ 1500 RPM complete with AMF control panel. The DG set shall consists of diesel engine coupled to a matching alternator, through flexible copuling and mouted on common base frame and complete with control panel. (i) ENGINE (Prime Mover) : Diesel Engine 1500 RPM, direct injection, multi cylinders, four stroke, confirming to ISO3046/BS 5514, water and coolant cooled, naturally turbo charged, capable of giving adequate power to drive alternator capable of delivering 160 KVA at outdoor atmospheric conditions at Nabagram,

(Taking all derating factor into consideration), 12 Volt (130 AH) battery electric start complete with fly wheel all standard fittings / fixtures as per manufacturer and including suitable panel with tachometer, lube oil temperature, pressure gauge and frequency meters and also including self starter system with electronic governor and Engine protection system (Shut down, High water temperature, low lube oil, oil pressure, over speed etc.) fuel tank and first fill of lube oil and other consumables etc and self starting system incl batteries etc complete. (ii) ALTERNATOR : Brushless AC alternator, 3 phase, 415 Volt, 4 wire, rated for output of 160 KVA, 1500 RPM, IP 23 Protection class enclosure, insulation class "H", salient pole, revolving field, single bearing automatic voltage regulator coupled through flexible coupling with and to match the above engine. (iii) BASE PLATE : Made out of structural steel as per manufacturers recommended design/specifications.

(iv) ACOUSTIC ENCLOSURE : Sheet metal fabricated cope type silent enclosure manufactured on CNC machines as per CPCB norms and powder coated after seven tank process, the enclosure shall be designed for reducing the sound level to 75 dB (A) at a distance of 1 M at 75% load under field condition 70 dB at 3 M from Gen set when DG set is working at full load along with testing conformance, lebeling certification etc as laid down in GSM No 371 (E) dt 17 May 2002 and amendements thereof. (v) FOUNDATION/PLINTH/BASE : Shall be provided as per manufacturers recommendations, however minimum 0.5 m Space should be available all around the set and height of plinth shall not be less than 0.5M. (vi) MISC : Tool kit, operation and maintenance catalogue, spare part list, overhaulling manuals, guarantee card etc shall be provided as per manufacturer standard parctices. (vii) Fully automatic AC operated additional battery charger of suitable capacity including suitable size twin core copper wires fixed with copper lugs shall be provided from charger to batteries for charging of batteries without extra cost. {Make of the complete DG set: - Kirloskar (KOEL GREEN) Model No- KG1-160WS, or equivalant model of Cummins/Ashok Layland/Greaves Cotton.

Supply and fixing onload changeover switch 125A, 4 pole, complete with connection with DG cable and main cable with necessary earthing connection with main supply panel/DBs complete all as specified and as directed. MAKE- HAVELLS, Model- Euroload, Cat No- IHCNFO0125 or equivalent model of make as specified in Appendix 'A' here-in-after.

Forming embankments sand mixed with non expansive soil in ratio 50:50 (approx) to achieve CBR value not less than 8% on ground as approved by GE and at OMC to get 97% maximum dry density of soil and sand filling, including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick, watering, ramming/ rolling and finishing to required size, shape, etc., not exceeding 1.5 m high from base of solid complete all as specified and as directed. {Note:- (i) This item includes mixing of sand and non expansive soil to achieve CBR value not less than 8%. (ii) Quantity for site development =2066.00Cum, Road/ Path/Culvert =.11352.00Cum and Hard Standing= 459.00Cum}.

Supply and fixing cornices (Ceiling and lining) made with plaster of paris as per approved desing by Garrison Engineer complete all as specified and as directed.

SCHEDULE 'A' PART-XV PROVISIONAL LUMP SUM FOR Ramp (Double of size 2.76m X 26.20m), Washing Platform, Incinerator, Dhobi Ghat (03 Nos), Basket Ball Ground, Football & Hockey Ground. {NOTE : (i) Provisional Lump Sum inserted in this Sch will be considered as one item priced at per SSR 2010. The bidder shall quote lump sum amount against this item and accordingly percentage shall be derived automatically by the system in the Excel Sheet BOQ based on the amount quoted against this item by the bidder. (ii) NOTE (Applicable for all items /parts) :- The bidders /contractors are advised to refer Notes on BOQ/SCH'A' before entry /quoting the rates.

Prasur Electricals & Engineering Co. (BID ID -3319776)

surendra infrastructure pvt ltd (BID ID -3313395)

FRIENDS CONSTRUCTION (BID ID -3311846)