8366 REPAIR AND MAINT TO COMPOUND WALL GATES FENCING HARD STANDING FOOTPATH AND MISC BR ITEMS UNDER AREA AGE BR I GE (CENTRAL) PUNE

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removal of debris out side defence land complete all as directed.

Demolition and breaking up drain pipes 150mm bore dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar all as directed.

Demolition and breaking up drain pipes 200mm bore dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar all as directed.

Demolition and breaking up drain pipes 300mm bore dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar all as directed.

Demolition of cement concrete bed in haunching and breaking up RCC drain pipes 600mm bore dia set in cement mortar all as directed.

Excavation in trenches not exc 1.5 Mtr deep and not exc 1.5 Mtr wide in manholes etc. and getting out in any type of Soil all as directed.

M & L plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling in mass concrete for manholes & drains all as specified and directed.

M & L plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation, filling in mass concrete for manholes & drains all as specified and directed. .

M & L plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in benching and surface channel of drain etc complete all as specified and directed.

M & L plain cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in coping including use and waste of necessary form work etc complete all as specified and directed. .

Dismantling of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc compete all as directed.

M & L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) grade D-5 and setting in CM 1:6 complete all as specified and as directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed.

All as per item No 13 above but exept stone complete all as specified and as directed.

M & L extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms mould, mitred / stopped ends etc complete all as specified and as directed.

M & L extra for forming fair finished drain or channel 45cm inner girth in cement concrete using extra cement incl, forms mould, mitred / stopped ends etc complete all as specified and as directed.

M & L extra for forming fair finished drain or channel 60cm inner girth in cement concrete using extra cement incl, forms mould, mitred / stopped ends etc complete all as specified and as directed.

M &L for rendering 15mm thick in CM 1:4 on stone masonary sufaces finished the surface even and smooth with using extra cement including taking down old cement plaster including raking out joints, hacking for key, scrubbing down with water all as specified.

M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished the surface even and Smooth without extra cement all as specified.

M & L Cement Concrete bed to drain pipes, 1:4:8, type D-2 using 20mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore dia pipe all as specified and as directed .

M & L Cement Concrete bed to drain pipes, 1:4:8, type D-2 using 20mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested for 200mm bore dia pipe all as specified and as directed .

M & L Cement Concrete bed to drain pipes, 1:4:8, type D-2 using 20mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested for 300mm bore dia pipe all as specified and as directed .

M & L for 150mm bore dia reinforced concrete drain pipes class NP-2 confirming to IS laid in trenches and jointed in CM 1:2 with collars all as specified and as directed .

M & L for 200mm bore dia reinforced concrete drain pipes class NP-2 confirming to IS laid in trenches and jointed in CM 1:2 with collars all as specified and as directed .

M & L for 300mm bore dia reinforced concrete drain pipes class NP-2 confirming to IS laid in trenches and jointed in CM 1:2 with collars all as specified and as directed .

M & L for 600mm bore dia reinforced concrete drain pipes class NP-2 confirming to IS laid in trenches and jointed in CM 1:2 with collars all as specified and as directed .

Returning , filling in , including spreading, levelling and well ramming in layers not exc 25cm thick in soil complete all as specified and as directed..

Removing excavated material (Soil) not exc. 50 Mtr and depositing where as directed at a level not exc. 1.5 Mtr above the starting point all as specified and as directed.

Dismantling of fencing wire mesh any type all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

Dismantling posts or struts (Wood, Steel or RCC) of any section embedded in concrete or brick work etc. including taking out embedded portion and making good disturbed ground complete all as directed.

S & F mild steel work in Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

Supply only Chain link MS galvanised fencing, any size or any type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as specified and as directed.

S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guide) and hanging , also fastening and decorative cast iron artical etc complete all as specified and as directed.

S & F 1.25mm thick, Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc. as required complete all as specified and as directed.

S & F 2.00mm thick, Fibre glass reinforced translucent plain sheeting fixed with coach screw and washer in roof, wall, Gates etc complete all as specified and as directed.

S & F in repairs galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed (each line of wire to be measured) complete all as specified and as directed.

M & L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide or zink chrome primer all as specified.

Demolition for precast concrete articles complete all as directed .

M & L 35mm thick (measured solid), precast cement concrete, type B-0, 1:2:4, using 12.5mm graded stone aggregate as in louvres and jallies including all mouldings but excluding frame and set in CM 1:4, complete all as specified and as directed. (Note : Precast frame shall be measured separately and paid separatly under relevant item)

M & L Precast cement concrete , type B-1 1:2:4 , using 20 mm graded stone aggregate as in columns, posts, boundary pillars, with plain fair faces, including chamfers, weatherings, throating etc. and set in cement mortar 1:4 complete with joints to match complete all as specified and as directed.

M & L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of white wash complete all as specified.

Dismantling of floors health or walls tiling and Stone floor including cement mortar bedded (but not backing) nd removal of debris out side defence land complete all as directed .

M & L 75 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub bases complete all as specified and as directed.

M & L precast rubber moulded glossy finish concrete tiles 30cm x 30cm x 20mm thick Chequered cement with mixture white cement and pigment, set, jointed and pointed in neat cement slurry in floors in coloured cement to match including screed bed 15mm thick in CM (1:6) complete all as specified and directed.

Demolition of stone slabs and tiles of any description in floors, aprons etc laid , bedded and pointed in any mortar and removing debris out side defence land all as directed.

M & L 20mm thick granite (of any type) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms, floor / skirting / risers or as in vertical support or counter top for wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 with edges polished / rounded as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface complete all as specified and as directed.

Rounding to edges of stone slabs, one edge, such as in steps, Cooking platform, and other similar situations all as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed, bedded and pointed in cement mortor all as directed.

M & L 60mm thick factory made chamfered edge cement concrete interlocking paver block of M-35 grade confirming to IS 15658-2006 with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size / shape made by table vibratory method using PU mould laid in required colour & pattern over and including 50mm thick compacted bed of fine sand compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M & L factory made kerb stone of M-25 grade cement concrete , laying at or near ground level in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M & L for Filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops etc , section of fillete exc 25 Sqcm not exc 50 SqCm complete all as specified and directed.

M & L Precast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slabs for man holes / drains etc and set in CM 1:6 complete all as specified and directed.

M & L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Mourya Enterprises

REKHA ELECTRICALS

Mukund Engineers and Contractors

M/s.BAJRANG CONSTRUCTION

Parhar Enterprise

ANIL CONSTRUCTION CO.

Agarwal Agencies