Selection of an Agency for Development and Redevelopment of Multiple Parks, Play Courts, Jogging Track at Various Locations in Sagar City under Smart Cities Mission

Site Clearance

Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of servicable material with all lifts and upto a lead of 1000mts and earth filling in the depression / pit and as per relevant clauses of section 2000 For Girth from 300mm to 600mm

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of1 m above ground level and removal of rubbish upto a distance of 50 meter outside the periphery of the area cleared.

Surface Dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. All kinds of soil.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead 1000 meter. Concrete By Manual Means Lime Concrete, cement concrete grade M-10 and below

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead 1000 meter. Concrete By Manual Means Cement Concrete Grade M-15 & M-20

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead 1000 meter. Concrete By Manual Means In cement mortar

Dismantling kerb stone by manual means and disposal of dismantled material with all lifts and up to a lead upto 1000 meter and as per relevant clauses of section-200.

Dismantling of barbed wire fencing/ wire mesh fencing including posts, foundation concrete, back filling of pit by manual means including disposal of dismantled material with all lifts and up to a lead of 1000 meter, stacking serviceable material and unserviceable material separately.

Removal of telephone / Electric poles including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and up to a lead of 1000 meter and stacking the serviceable and unserviceable material separately.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles above 25 mm and up to 40 mm

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge. 1:3:6 or richer mix

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-Charge

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead. Of area beyond 3 sq. meters

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of:

Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 meters lead as per direction of Engineer-in-charge.

Civil Works

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. Ordinary rock

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. Hard rock (blasting prohibited)

Making Bore holes for providing dowel bars at designed depth in rock foundation by drilling 40 mm dia bore hole in rock including necessary bending hooking in position and grouting with cement slurry etc. complete as per drawing and specification (Steel to be paid Seperately)

Loading and unloading of stone boulder / stone aggregates / sand / kanker / moorum. (Placing tipper at loading point, loading with front end loader, dumping, turning for return trip, excluding time for haulage and return trip)

Pumping out water caused by springs, tidal or river seepage, broken water mains ordrains and the like.

Filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth under floors including, watering, ramming consolidating and dressing complete. Moorum/Hard copra

Supplying and filling in plinth under floors including, watering, ramming consolidating and dressing complete. Crusher Stone Dust

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level.- Cement concrete grade M-10 (Nominal Mix) with 20 mm maximum size of stone aggregate

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level.- All work up to plinth level : Cement concrete grade M-15 (Nominal Mix) with 20 mm maximum size of stone aggregate

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement. including Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-25 grade reinforced cement concrete by using 410 kg. of cement per cum of concrete. All work up to floor 2 level.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. up to floor two level, excluding the cost of centering, shuttering and finishing : Concrete grade M-15 (nominal mix) with 20 mm maximum size of stone aggregate

Brick work with modular fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, class designation 100 average compressive strength in superstructure above plinth level up to floor 2 level including the cost of scaffolding : Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick work with well burnt chimney bricks in bulls patent trench kiln ,crushing strength not less than 25kg /sqcm and water absorption not more than 20% in foundation and plinth. Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with of class designation 40 in super structure above plinth level up to floor 2 level including the cost of scaffolding. Cement mortar 1:4 (1 cement : 4 coarse sand)

Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry (with of class designation 40).

6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand)

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement: 6 fine sand).

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire upto floor two level including all wastage etc. complete. Thermo-Mechanically Treated bars. (Grade 550/600)

Centering and shuttering including strutting, propping etc.and removal of form for : Foundations, footings, bases of columns, etc. For mass concrete.

Centering and shuttering including strutting, propping etc.and removal of form for : Columns, pillars, piers, Abutments, Poets, Struts.

Centering and shuttering including strutting, propping etc.and removal of form for : Suspended floors, roofs, landings, etc.

Centering and shuttering including strutting, propping etc.and removal of form for : Lintels, Beams, Plinth Beams, Girders, Bressumers and Cantilevers.

Centering and shuttering including strutting, propping etc.and removal of form for : Walls (any thickness) including attached pelasters, plinth, etc.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying 1.5 mm thick (in two coat) white cement based wall putty of best quality, over plastered surface to prepare the surface even and smooth complete

Applying one coat of cement primer of approved brand and manufacture on wall surface: cement primer.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: including labour rate.

Painting Steel work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @.90 L/10 sqm over an under coat of primer applied @.80L/sq of approved brand or manufacture.

Providing and applying flakes textured homogeneous wall finishing system consisting of a two component system of dry flakes (9.5kgs per/pack) made of a special grade of heat treated China clay with rigid homopolymer coated with fade resistant pigments and a 100% acrylic polymer Bonding agent (5kgs/pack) applied thickness of the coating being between 0.8-1.2mm, to be applied in single coat, on a cured, smooth level plaster surface without keying, as per the shades/ combinations approved, as per manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per direction/supervision of the engineers-in-charge inclusive of one coat of primer on the base at all heights etc all complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and laying polished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 60x60 cm x 10 mm

Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade.

Red Sandstone - Exoppsed Face machine cut and table rubbed with rough backing. 30mm thick.

Providing and laying Antiskid endura floor tiles (300mmx300mm), 12 mm thickness with water absorption's less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand ) including grouting the joints with white cement with matching pigments etc. Complete.

Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded (wherever required) and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooring laid over 20mm thick base of cement mortar 1:4 (1Cement : 4 Sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. Black Area of slab more than 0.50 sqm

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine ith strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50 mm thick compacted bed of course sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying 80mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of course sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. Granite Stone of approved shade.

Kota/cuddapah stone slab 30 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar (1 cement : 4 course sand) 1 : 4 (minimum size of kota stone 0.25 sqm)

Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete and as per clause 408 of specifications

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm

Making plinth protection 50mm thick of Cement concrete grade M- 10 (Nominal Mix with 20 mm maximum size of stone aggregate) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Providing and placing on at all floor levels high design HDPE (polyethylene) water storage tank (3 layer) ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound (Dr. Fixit or Equivallent) consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately For the purpose of measurement the entire treated surface will be measured.

Providing precast cement concrete Jali of cement concrete grade M- 15 (Nominal Mix with 20 mm maximum size of stone aggregate) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits. 40 mm thick

Providing and fixing square-mouth S.W. gully trap grade 'A'‟ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : With Modular Bricks class designation 40. 180 x 150 mm size P type.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. 25 mm nominal outer dia .Pipes.

Providing laying and jointing following P.V.C. pipes with solvent cement joint for 6,8 and 10 kg/sqcm pressures including testing of joints, cost of jointing material etc. complete in all respect. ( Conform to IS 4985:2000 and IS 7634 (PT-3) 110 mm dia (6 Kg/cm2)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore.

Providing & laying of P.V.C. pipe for roof top harvesting from roof slab to Ground floor including all fittings, jointing material with bypass arrangement with suitable valves. P.V.C. pipe 6kg/sqm (110 mm)

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of required thickness for rolling shutters. 80x1.25mm M.S. laths with 1.25 mm thick top cover.

Providing and fixing ball bearing for rolling shutters.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of such as duro board, century or equivelant make. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing factory made laminated 100% solid PVC flush door shutter ( 28 mm thickness ) made from rigid PVC foam sheet (Single Extruded) with density 600 kg/cum and laminated on both sides by laminated sheet/ PVC foil lamination at the manufacturing process itself. 28 mm thick pre laminated Solid PVC Flush Door Shutter.

Providing and fixing factory made 100% solid wood plastic composite (WPC) door frames made from wood plastic composite ( single extruded process) material with density 0.78 kg/cum and manufactured by a ISO 9001-2000 certified company .Water absorption not more than 0.01% cum. WPC Door Frame-single rebate (120mm x40mm)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with L-Type section made of 1.60mm thick M.S. Sheet, joints mitred and welded and grinded finish profiles required size with 15x3mm lugs 10cm long embedded in cement concrete M-10 (Nominal Mix with 20mm maximum size of stone aggregate) blocks 15x10x10cm or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primers.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness

Providing and fixing bright finished brass door latch with necessary screws etc. complete : 250x16x5 mm

Providing and fixing bright finished brass handles with screws etc. complete : 75mm

Providing and fixing bright finished brass handles with screws etc complete 125MM

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200x10 mm

Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete : 300x16 mm

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete

Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. 110 mm diameter OD

Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design: 110 mm diameter PVC. Pipe

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75mm

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes. 75mm diameter

Providing and laying cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed concrete as per standard design : 110 mm Dia SW Pipe

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single tee with door 75x75x75 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single tee without door 75x75x75 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Bend 87.5° 75 mm bend

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75 mm outlet Sand Cast Iron S&S as per IS- 1729.

Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. 160 mm diameter OD

Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) all-round PVC. pipes including bed concrete as per standard design: 160 mm diameter PVC. pipe

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm Nominal Bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm Nominal Bore

Providing and fixing C.P. Brass shower rose with 15 or 20mm inlet 100 mm diameter

Providing and fixing CP brass Urinal spreader of approved quality and make

Oval shape wash basin over counter/under counter with 15 mm C.P brass pillar tap (Counter to be paid sepratly)

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water ( 250 ml and 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.

Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete M-15 with aggregate of 20 mm nominal size over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1cement : 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3mm including strengthening with 3mm dia. wire or nuts, bolts and washers as required complete as per the direction of Engineer-in- charge.

Providing and fixing in position best indian single Lever Auto Mixing Divertor (Cartradge Size 47mm,nickel plating 0.10 micron and chrome plating 0.3 micron) for Shower area use only .

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 20 mm nominal bore

Bottle trap 38mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263gms.

Providing and fixing uplasticised PVC connection pipe with brass unions 30 cm length 15 mm nominal bore

Providing and fixing C.P. brass grating of approved quality and make conforming to IS: specification.23.38.1 100 mm dia.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 40 class designation bricks in cement mortar 1:4:(1 cement : 4 sand ) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total wieght of cover with frame to be not less than 38 kg (weight of cover 23 kg and wieght of frame 15 kg) RCC top slab with cement concrete grade M-20 (Nominal Mix with 20mm maximum size of stone aggregate), 15 cm thick foundation concrete grade M-7.5 (Nominal Mix with 40mm maximum size of stone aggregate), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design. The sizes of chambers as under : Chamber nside dimensions 500 x 700 mm and 45 cm deep for pipe line with one or two inlets :

Extra for depth beyond 45 cm of brick masonry chamber at 12.25.1 to 12.25.3 : 500 x 700 mm

Constructing brick masonry moudlar brick class designation 40 manhole in cement mortar 1:4 (1 cement : 4 sand ) R.C.C. top slab with Cement concrete grade M-20 (Nominal Mix with 20mm maximum size of stone aggregate), 20 cm thick foundation concrete grade M-7.5 (Nominal Mix with 40mm maximum size of stone aggregate) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 sand) finished with floating coat of neat cement and making channels in cement concrete grade M-15 (Nominal Mix with 20mm maximum size of stone aggregate) as per standard design. The sizes of manhole and manhole covers as detailed below. Manhole inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

Extra for depth for manholes. With Modular bricks class designation 40 Size 90x80 cm

Making soak pit 2.5 m diameter 3.0 meter deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 40 and S.W. drain pip 100 mm diameter, 1.8 m long complete. Over the filling shall be placed single matting which shall be covered with minimum layer of 7.5 cm earth. The shaft be covered with 7.5 cm thick stone or R.C.C. slab 10 cm wide and 10 cm deep brick edging with bricks of class designation 40 shall be provided round the pit. The connection of the open surface drain to the soak pit shall be made by means of 100 mm diameter S.W. pipe with open joints, as per standard design. (Fig 2.25)

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: 4 mm thick alumminium composite pannel material consisting of 3 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.5mm thick)

Sanitary Pad Vending Machine & incinarato

Toilet Feed back Machine

Solar water heating system with heat exchanger with min 100 Lit Capacity Conforming to IS 12976-1990 or Latest

Hand Dryer Conformity to IS: 302-2-30: 2007 latest

Dust Bin (Large)

Dust Bin (Small)

Electrical Work

Point wiring including metallic switch box, sheet, switches, sockets, lamp holders/ceiling roses etc with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI Marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit including painting etc. as required as per specification for :- a) Short point

Point wiring including metallic switch box, sheet, switches, sockets, lamp holders/ceiling roses etc with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI Marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit including painting etc. as required as per specification for :- b) Medium point

Point wiring including metallic switch box, sheet, switches, sockets, lamp holders/ceiling roses etc with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI Marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit including painting etc. as required as per specification for :- c) Long point

Point wiring including metallic switch box, sheet, switches, sockets for 3 pin 6 Amp. Socket outlet point with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit with required materials as per specification on same board .

Wiring for circuit wiring with PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) of ISI marked suitable size including painting etc. as required as per specification 1.3.6 (a) 2x2.5 Sq.mm.

POWER WIRING IN SURFACE RIGID P.V.C.CONDUIT (HEAVY DUTY) SYSTEM WITH FLUSH TYPE ACCESSORIES SOR 1.5.1 Point wiring including metallic switch box, sheet, for 3 Pin 16 Amp. Socket Outlet Point With 4 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in Surface rigid P.V.C.Conduit (HMS) ISI Marked of suitable size including painting etc. with 16 Amp. F.T. Switch & Socket / S.S.Combined 16 Amp. of ISI Marked and 4 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit as per specification for :- (C)Long Point

MODULAR SWITCH BOXES SOR 2.9.3 Supplying and fixing of approved make modular type metal box with modular frame/ base plate and cover plate including fixing in concealed / surface excluding switch,socket etc. as required for:- 6 Module

MODULAR SWITCH BOXES Supplying and fixing of approved make modular type metal box with modular frame/ base plate and cover plate including fixing in concealed / surface excluding switch,socket etc. as required for:- 12 Module

CIRCUIT WIRING IN EXISTING CONDUIT / PVC CASING CAPPING 1.5 Sq mm cable 3 X 1.5 sq mm

Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle , 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898 :2002 but without enclosures :- 8.5.1SINGLE POLE (SP) 8.5.1.2 6 Amp to 32 Amp Rating

Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle , 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898 :2002 but without enclosures :- 8.5.3 DOUBLE POLE (DP) 8.5.3.3 For 40 Amps. Rating only.

Supplying of MCB Isolators suitable for 240/415 Volts, 50 Hz AC supply with KA value rating 10 kA of approved make confirming to IS :13947-Part III : 1993 & IEC :60947- 3:2001 (without enclosures) :-

Supply of approved make powder coated sheet steel encloser SPN MCB DB inclusive of Busbar, Neutral bar, Earth bar & two earth terminals etc. complete as per IS:13032( exclusive of MCB & isolator)- 8 way double door

Suppling and fixing of approved make step type Modular electronic, Fan regulator single/double module including connection etc. as required on existing board

Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete as required confirming to IS :374/1979 with upto date ammendments. Ceiling Fan (Energy Saver 60 W)-1400 mm Sweep

Supplying, erecting and testing of approved make Exhaust Fan heavy duty with mounting frame, blades AC 230-250 complete connection and including, frame bolt/ Anchor hole fastners etc. complete finished and as required. 450mm sweep 900 RPM

Supplying and fixing of LT Panel accessories of approved make in existing LT Panel including connections etc.as required as per specification LED Lamps

Supplying, fixing and testing of approved make fluorescent single & double tube fitting 36/40 watt, rust resistant, stove enamelled paint, CRCA sheet steel housing with opal acrylic diffuser and decorative end plates complete with copper ballast complete duly wired (without tube rod) as per specification & fixing . 1 x 40/36 watt

Supply of XLPE Insulated power cable (conforming IS- 7098 ) 1100 Volt grade/Heavy duty power cable conforming to IS 1554-1100 Volts grade , 2 core /3½ core/4 coreISI MARKED with Alu. Stranded /solid conductor ARMOURED 3 Core 10 Sq.mm.(XLPE)

PUBLIC PARK / PUBLIC TOILET SAGAR SMART CITY LTD. SSCL LOGO & GENTS , LADIES & HANDICAP LOGO at various site of "Construction of Public and Community Toilets in Sagar City" •The thickness of the acrylic should be Minimum 5MM. •Samsung / Bajaj or equivalent Modules should be installed inside the board along with rainproof drivers and Controllers. •The ACP sheet used in the Fixture should be branded. •The design of the Acrylic should be cut on a Computer numerically controlled router machine for finest quality and finish • Fixing arrangement of the Letters shall be such that even during stormy weather conditions, the fixtures shall not get

Hotriculture and Plantation

Trenching in ordinary soil up to a depth of 60cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling with in a lead of 50m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment).

Loading and unloading of stone boulder / stone aggregates / sand / kanker / moorum. (Placing tipper at loading point, loading with front end loader, dumping, turning for return trip, excluding time for haulage and return trip) For a lead upto 5 Km.

Rough dressing the trenched ground including breaking clods.

Fine dressing the ground

Spreading of sludge, dump manure or/and good earth in required thickness (Cost of sludge, dump manure or/ and good earth to be paid separately).

Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) Screened through sieve of I.S. designation 20mm

Supplying and stacking sludge at site including royalty and carriage up to 1 km (sludge measured in stacks will be reduced by 8% for payment).

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge

Grassing with „Doob‟ grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if needed (the good earth shall be paid for separately). In rows 5 cm apart in either direction.

Edging With Brick laid dry linght wise , including requried excavation ,refilling , consolidrating with hend d packing and sprading surplus earth neatly with lied up to 50 m Common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Duranta Golden plant, having ht.15 to 20 cm bushty shape plant with fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot.

Alternanthera species plant of height 15 cm to 20 cm, full of branches and foliage in 15 cm size of Earthen Pot / Plastic Pot

Providing Plant Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot,

Providing of Croton Challanger variety plant, having ht. 30cm and above, well developed with full of fresh and healthy leaves in 20 cm size of Earthen pot / Plastic pot.

Providing of Dracaena mahatma plant, having ht. 30 cm to 45 cm, well developed, fresh and healthy foliage in 20 cm size of Earthen pot / Plastic pot

Acalypha red well developed with fresh & healthy 30 to 45 cm ht. plant in 20 cm size Earthen Pot/ Plastic Pot

Acalypha green well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. plant in 20 cm size Earthen Pot/ Plastic

Supply and stacking of plant Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm

Providing Plant Verbina in different colour having 30 to 45 cm ht., well developed with fresh & healthy foliage in bloom condition in 25 cm Earthen Pot/Plastic Pot.

Supply and stacking of plant Mussaenda erythrophylla (Rosea) of height 60-75 cm. multi branched in earthen pots of size 25 cm

Foxtail palm of plants ht. 240-270 cm bottom girth 35-40 cm well developed in big size HDPE bags

Providing and displaying of Areca palm plant, having ht. 1.50 m to 1.80 m with 6 to 8 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.

Cyprus Golden 30 to 45 cm ht. plant well developed good Golden colour foliage, Conial Shape in 25 cm Earthen Pots

Allamanda cathartica plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots

Supply and stacking of plant Thuja compacta of height 45-60 cm., well branched in earthen pots of size 25 cm

Supply and stacking of plant Tabernaemontana coronaria (Chandni single) of height 45-60 cm. in earthen pots of size 20 cm

Azadirachta indica ( Neem ) of plants height 120-130cm in big polybag of plants size 25 cm

Nauclea cadamba (Kadam) of plants height 150-165 cm. in big poly bag of plants size 25 cm

Delonix regia (Gulmohar) of plants height 150-165 cm. in big poly bags of plants size 25 cm

Phyllanthus emblica (Amla) of plants height 150-165 cm. in Big HDPE Bag

Ficus bengalensis (Bargad) of plants height 120-135 cm. in big poly bags of plants size 25 cm

Plumeria alba of plants height 120-135 cm. with 2-3 branches in bags of plants size 30 cm

Tectona grandis (Teak) of plants height 150-165 cm. in big polybags of plants size 25 cm

Bauhinia purpurea (Kachnar) of plants height 150-165 cm. in big poly bags of plants size 25 cm

Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan, Scarlet Queen, Varigata, Glabra Formosa, Peruviana Odissi, Partha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) plant of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots.

Dalbergia sissoo (Seasam) of plants height 120-135 cm. in big poly bags of plants size 25 cm

Providing and Displaying Cycus revoluta in 35 cm challi, specimen plant, having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed as per direction of the officer-in-charge

Supply and stacking of plant Ficus panda of height 45-60 cm. with 6-7 branches and healthy foliage in p.bag of size 25 cm

Supply and stacking of plant Murraya exotica of height 45-60 cm. in poly bags of size 15 cm

Chlorophytum-variegated plant, full of leafy suckers in 15 cm size of Earthen Pot / Plastic Pot.

Cuphea chinensis plant of ht. 30-45 cm full of branches and healthy foliage in 25 cm size of Earthen Pot / Plastic Pot.

Preparation of beds for hedging and shrubbery by excavating 60cm deep and trenching the excavated base to a further depth of 30cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1(8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50m lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately).

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 1.2 m dia and 1.2 m deep.

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 60 cm dia, and 60 cm deep.

Electrical and Lighting

Porviding,erecting, testing and commissioning solar street light system on 80 mm heavy duty galvanised iron pipe 6 meter hight with 30cm x 30cm x 2mm base plate installed own cement concrete padestal casing complete with solar panel, solar battery with charger,other accessories with control panel in weather proof pole box,solar fitting LED type or CFL type 18 watt to 20 watt (set of 2 nos.)

Supplying and installing Double wall corrugated pipes (DWC) of HDPE ( IS 14930 Part II -marked ) for cable laid under ground with necessary connecting sockets/ couplings,tees of same material and at required depth upto 90cm. below road/ground surface,including excavation, back filling with excavated material with ramming and making the surface good. 50.00mm outside dia.

Supplying and installing Double wall corrugated pipes (DWC) of HDPE ( IS 14930 Part II -marked ) for cable laid under ground with necessary connecting sockets/ couplings,tees of same material and at required depth upto 90cm. below road/ground surface,including excavation, back filling with excavated material with ramming and making the surface good. 63.00mm outside dia.

Supply of XLPE Insulated power cable (confirming IS- 7098) 1100 Volt grade/Heavy duty power cable confirming to IS 1554-1100 Volts grade, 2 core /3 1/2 core/4 core ISI MARKED with Alu. Stranded/solid conductor (Make: Havells /Polycab/Finolex) ARMOURED 4 CORE 10sq.mm(XLPE)

Laying of one number PILC/PVC insulated and PVC sheathed power cable of grade exceeding 1.1kV but not exceeding 11kV of size not exceeding 120 Sq.mm direct in ground including excavation sand cushioning, protective covering and refilling the trench etc. as required.

Supply of XLPE Insulated power cable (conforming IS- 7098 ) 1100 Volt grade/Heavy duty power cable conforming to IS 1554-1100 Volts grade , 2 core /3½ core/4 coreISI MARKED with Alu. Stranded /solid conductor 6 Sq.mm.(XLPE)

Supply of XLPE Insulated power cable (conforming IS- 7098 ) 1100 Volt grade/Heavy duty power cable conforming to IS 1554-1100 Volts grade , 2 core /3½ core/4 coreISI MARKED with Alu. Stranded /solid conductor 10 Sq.mm.(XLPE)

Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle, 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898 : 2002 but without enclosures. TRIPLE POLE - 63 Amps

Supplying of ISI Marked Switch Fuse Unit (rewirable type) triple pole with neutral link, 415 Volt having conduit/ cable gland entry with two earthing terminals confirming to IS: 14947 - 100 Amps. /Timer

Clamps bolts, nuts etc.

Supplying and fixing flood light with high power LED of 1 to 3 W each assembled on single MCPCB, system lumens output with efficacy>90 lm/W. luminiare having color temp 6500K & 50000 burning hrs life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF 0.95 & surge protection 3KV. Housing made of pressure die cast aluminium with heat resistant flat glass, IP65 protection. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory i/c connection lead, testing etc to complete the job. 2 Yrs Guarantee certificate from manufacturer. 30W

Supply, fixing & testing of approved make of LED integral type bollard cylindrical/square shape housing cast aluminium dome shape top cover fixed with cylindrical shape acrylic cover having base plate with holes for direct mounting complete with all accessories including preparation of foundation, fixing, connection etc. as required. LED of 1 to 3 Watt each assembled on single MCPCB, system lumens output with efficacy>90 lm/W. luminaire having color temp upto 6500K & 50000 burning hrs. life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare, comprises of driver PF> 0.95 & surge protection 10KV. IP65 protection. Submission LM 79-08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job. Bollard LED 8-10 Watt cylindrical shape height > 700mm, color temp 3000-6000k

Supply and Installation of Lamp Post 3 mtr height - 20 Watt

Supply and installation of Focus lights (Color)

Water Supply Work

Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. PE-100 , 25mm dia, 6kg/sqm

Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. PE-100 , 20mm dia, 6kg/sqm

Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. PE-100 , 63mm dia, 6kg/sqm

Providing and fixing medium grade G.I. pipes medium class (ISI mark) complete with G.I. fittings (ISI mark) and clamps, including cutting and making good the walls etc 20 mm dia. nominal bore

Providing and fixing gun metal/ brass check (non- return) valves Class-II, confirming to IS-778/1984 (Reaffirmed 2005) ends, tested to 21.09 female kg/sq.cm. 25 mm diameter including labour rate

Providing and laying Equal Tee confirming to IS specifications. 25mm dia, 6kg/sqm

Providing and laying Equal Tee confirming to IS specifications. 20mm dia, 6kg/sqm

Providing and laying Bend 90 Degree confirming to IS specifications. 20mm dia, 6kg/sqm

Drilling of perfectly vertical bore hole of a diameter suitable to receive 200mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 200mm nominal diameter M,S./G.I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete. in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc.

I.S.I. marked UPVC casing pipe confirming to IS 4985/1988. Screen pipes with ribs 150mm dia

I.S.I. marked UPVC casing pipe confirming to IS 4985/1988. Screen pipes with ribs 200mm dia

Supplying & Installation of required capacity of single phase, 50 Hz,220V, deep well submersible pump Stainless Steel body, as per IS of approved Make, suitable for 4"/6 " tube well with Control Panel Starter suitable for Submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications but excluding Pipe, SS/Nylon wire rope and connection cable 1 H.P. with upto 5 stages, Head Mt 35-15, Discharge LPM 40-125

Drainage Work

Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. PE-100 , 200mm dia, 6kg/sqm

Providing, laying, Jointing following PVC U pipes with solvent cement joint for non-pressure gravity drain nd sewer applications including testing of joints, cost of jointing materials etc. complete in all respect. (Conform to IS 15328:2003, solvent cement shall conform 14182). 110 mm dia.

Fountain Work

Float: - Providing, laying & fixing of suitable float arrangment for 20 ft longitudinal fountain made up of FRP filled with PUF & suitable anchoring to sides or bottom including Filter station mesh filter for fountain/submersible pump made of SS mesh.

Providing & fixing of aerator jet nozzle of S.S/ brass plated complete inlet size 2”height of jet approx 10 FT.

Light & PLC controller :- Providing & fixing of programmable colour changing light 12 watt fix or sequence fixed 1 no. sequencing.

Providing laying & fixing of DMX controller for above light.

Control panel system electrical control panel made of 16 gauge CRC sheet powder coated with starter single phase preventer MCB volt meter TPN mCB protection circuit as per the requirement of foundation and space for step down transformer for the lights including all electrical wiring.

Supplying &installation of required capacity of three phase, 50 Hz,415V, deep well submersible pump steel body, as per IS of approved make, suitable upto 6 " tube well with control panel starter suitable for submersible pump with dry run protection, single phase preventer, connections, including clamp, bore cap etc. as required as per specifications but excluding pipe and connection cable. 3 HP with upto 6 stages, head metre 55-7, discharge LPM 60-510

Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make. 4.0 sq.mm multi strand

Earthing with G.I. earth plate 600mm X 600mm X 6mm thick including accessories and providing masonry encloser in cement mortar, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7 metre long etc. (but without charcoal or coke and salt) complete as required

Supplying and drawing single core PVC insulated cable FRLS with copper multi strand conductor ISI marked in existing rigid PVC casing and capping/conduit in surface or concealed as per specification. 10.00 sq. mm. cable 4 X 10.00 sq. mm.

Sprinkler System -Piping network

Providing, laying & jointing in position HDPE pipe conforming to IS:4985:2000 and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction, including excavation of trenches, refilling(Earth work includes 450mm of soil cover over the pipe and width of 300mm) HDPE pipe 160mm-10kg/cm2(PE-100)

Providing, laying & jointing in position HDPE pipe conforming to IS:4985:2000 and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction, including excavation of trenches, refilling(Earth work includes 450mm of soil cover over the pipe and width of 300mm) HDPE pipe 90mm-10kg/cm2(PE-100)

Sprinkler System -Sprinkler& Accessories

Providing & Fixing of Pop up Sprinkler with Gear driven mechanism having 2" female inlet, dia of coverage 84.0-92.0 m at 6.0-7.0 bar, capable of delivering discharge 9.08-15.6 lps and trajectory of throw 23°. The Sprinkler shall be available in (5) numerically coded interchangeable nozzle, the sprinkler nozzle assembly shall incorporated diffuser screw facility for radius reduction and shall be suitable for use in extremely saline and/ or dirty water condition, so that sprinkler shall not require secondary filtration of any kind. The sprinkler shall provide both part and continuous forward full circle adjustment from 40°to 360°. Sprinkler shall have minimum 16cm Pop up Stro ke to bring the rotating nozzle in clean environment. It shall be suitable for sports fields like Football, Rugby, Hockey, Cricket, Soccer & Baseball. It should have a feature of special internal rubber folding top, avoids the passage of powder, sand and dirty water around the telescopic pipe as approved by Engineer -in- charge.

providing and fixing of connecting assembly for 2" PGP.

Providing & Fixing of 1 1/4" Two piece Aluminium Quick Coupling Valve (QCV) It has auto close lid made of heavy duty rubber when QCV is not in use. Dubble piece construction,having stainless steel valves as approved by Engineer -in- charge.

Providing & Fixing of 1 1/4" Steel Quick Coupling Valve (QCV) key with handle with 11/4" outlet as approved by Engineer -in-charge.

Providing & Fixing of Metallic Service Saddle 90mm X 1 1/4"

Sprinkler System -Volve and Accessories

Providing & Fixing of 4" Butterfly Valve for Head Unit. It shall be with integral synthetic rubber lining. It shall be lever operated quarter turn and offers bi- directional smooth operation. The hydraulic body test pressure of the cast iron buffer type Butterfly Valve is 15 bar and hydraulic seat test pressure of the product is 11 bar as approved by Engineer -in-charge.

Providing & Fixing of 2.5" Gun Metal Ball Valve for bypass arrangment. It shall be full bore, two piece design, lever operated, screwed Female BSP parallel threaded of 2.5" dia as approved by Engineer -in-charge.

Providing and fixing of 4" Foot valve as approved by Engineer -in- charge.

Providing & fixing of Valve box 20" Rectangular Valve Box with cover. The valve boxes shall be high strength, high density polyethylene constructed material. It should be UV stablizer with anti oxidants, resistant to moisture. It should be minimum 12" height and 25" length. Rain Spa/ MA IS/Arkal/Toro or as approved by Engineer -in- charge.

Providing and fixing of Aluminum pilot Pressure relief valve size 2" along with bypass arrangement, cover & necessary fittings. It shall be adjustable Pressure setting from 22 PSI - 120 PSI for maximize performance. It should be high strength cast Aluminum body, Stainless Steel shaft offer, strength and corrosion resistant. Oil tempered coil spring provides quick response for individual pressure range as approved by Engineer -in- charge.

Providing & fixing of a double acting Continuous Air release valve 2" made of high strength plastic with fiber glass reinforced . The Continuous Air release valve shall be capable of both releasing and admitting air from and into the line during system operation. The working pressure shall be 10 Bars and testing pressure shall be 16 Bars as approved by Engineer -in-charge.

Providing & fixing of disc filter (120 mesh) 50m3/hr having an inlet & two outlets connections of 3", 2 pressure guaze ports of 3/4", a helix made of fibre glass reinforce polyamide at base of disc filter cartridge to create a helical effect in the incoming water, spinning particulate in suspension away from tec filtering element and so minimizing cleanings frequency, 3/4" outlet for flushing at bottom of filter & maximum working pressure of 14 bars as approved by Engineer -in-charge.

Providing and fixing of pressure guaze ( glycerine filled), 4" dial ( 0- 10kg/cm2)

Sprinkler System -Automation Unit

Providing & Fixing of 2" BSP Straight flow Solenoid valve with flow control and "pressure regulation unit" which shall be normally closed 24 VAC 50/60 cycle solenoid actuated angle pattern design. The valve pressure rating shall not be less than 10.5 bar. The valve body shall be constructed of high-impact, weather- resistant Nylon Glass Filled with heavy duty diaphragm and stainless steel screws, fasteners and components. The valve shall have manual open/close control (internal bleed) for manual opening and closing of valve without electrically energizing the solenoid, manual bleed can be removed for " tamper proof" operation. The valve shall operate with minimum 24 VAC at 10.5 bar. The valve must open or close in less than 1 minute at 10.5 bar, and less than 30 seconds at 0.7 bar. The valve construction shall provide for all internal parts to be removable from the top of the valve without disturbing the valve installation as approved by Engineer -in- charge.

Providing and fixing of DBR connector It shall be pre filled, low voltage, dry splice, direct bury , waterproof wire connector that protect electrical connection from corrosion, and moisture. Each splice kit contains two wire nuts, water proof, Gel-filled housing and ideal splice organizer as approved by Engineer -in-charge.

Providing and fixing of 1.5 sq. mm single core copper conductor cable (live wire) - as approved by Engineer -in-charge.

Providing and fixing of 1.5 sq. mm single core copper conductor cable - as approved by Engineer -in-charge.

Providing and fixing of 10 sq. mm single core copper conductor cable - as approved by Engineer -in-charge.

Providing and fixing conduit pipe 32mm dia, as approved by Engineer -in-charge.

Other System

Night Vision CCTV Monitoring Camera (Min 5 MP) integrated with ICCC

Music System for Park( Music System For 1 Acre= 1 Unit)

Benches (Min- 3 seater ) - Park Type Benches

Solar tree (2 KW)

INSTALLATION OF VARIOUS PLAY FIELD- Ground Prepration for Tennis Court, Basketball Court& Vollyball Court

EXCAVATION - Excavation to a depth of 6 inches to remove all weeds and grass from its roots, create a slope of 1” in every 10’ in the sub-base on the shorter axis. Extreme care would need to be taken to ensure a correct slope of 1” in every 10’.

COMPACTION - Compaction of the sub-base will be by 8 – 10 ton roller.

ANTI TERMITE & WEEDECIDE - Carry out anti termite and weedicide on the total area by making 9” deep holes spaced 12” apart and injecting the chemicals and also spraying.

WATER BOUND MACADAM (WBM) - 200 mm thick Lay a 1st layer of 75mm compacted water bound macadam with good earth (not moorum). WBM to be densely compacted by keying and interlocking the stones to ensure no settlement takes place. Lay a 2nd layer of water bound macadam (75mm thick) same as above except the stone size will be smaller.

BITUMINOUS MACADAM - (Bitumen @3.5 % by weight) Lay a 50mm compacted thick Hot Mix asphalt BM course.

ASPHALTIC CONCRETE - (Bitumen @5.0 % by weight) Lay a 25 mm compacted thick Hot Mix A.C. course

SEAL COAT - Seal Coat with stone dust.

INSTALLATION OF VARIOUS PLAY FIELD- Flooring for Jogging and Children Play Area

36mm Rubber Concrete for EPDM Flooring (Minimum Base Rubber 30MM and EPDM 6MM)

15mm Rubber Concrete for Jogging Track Area (Minimum Base Rubber 9MM and EPDM 6MM)

INSTALLATION OF VARIOUS PLAY FIELD- Flooring for Skating Area

Acrylic Coating 5 Layer Hard Coat for Skating

Skating 2mm PU Flooring

INSTALLATION OF VARIOUS PLAY FIELD- Prepration of Ground and Installation of Natural Grass

INSTALLATION OF VARIOUS PLAY FIELD-

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 4mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.

Volleyball Accessory Volleyball net with post

Basket Ball Flooring

Basketball Accessory 8” Round pipe 5.2mm (W.T) with 2.2 mtr distance from the board. Plus 25mm back board transparent Acrylic with International Standard die made framecoated die made frame with built in brackets for mounting. Plus Dunking Rim withthree Spring Mechanism.

INSTALLATION OF VARIOUS PLAY FIELD- Tennis Court (3)

Edge Wall (350 mm height) Laying a 6" retaining wall keeping the top level straight

Drain- Making an open saucer drain at the lower end

Synthetic Acrylic (8 Layers) - ITF Classified Category 1,2,3,4 & 5 In this system we shall apply 1 layer of resurfacer 5 layers of cushion, 2 layers of colorand court markings. This is a cushioned system which makes for comfortable and enjoyable play. The product must be an ITF classidfied product in all the categories i.e. 1,2,3,4&5

Tennis Accessories American designed tennis net post and export quality tournament nets. They are of excellent quality and are used in all the major tournaments in the country. Net

Tennis Accessories American designed tennis net post and export quality tournament nets. They are of excellent quality and are used in all the major tournaments in the country. Net Post

Tennis Accessories American designed tennis net post and export quality tournament nets. They are of excellent quality and are used in all the major tournaments in the country. Water Removing Roller

Maintenance of Landscaping and Horticulture work

Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.) Permanent office accommodation. (as per yard stick 1Mali =1.25Acre

ARJIT CONSTRUCTION