Balance Work for the reconstruction of drain from H/o Dr. Harneet Koul ,H-no 105/6 Lane no 10 H/o Harbans Lal H-no 10 Ward no 43 and laying of precast paver tiles in various Location

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles above 25 mm and upto 40 mm.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 m lead. As per direction of engineer–in-charge.1:3:6. or richers mix(I/c equivalent design mix)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. (All kind of soil 1 meter from cutting Edge)

Removal of Excavated mulba dismantled unserviceable material from the site of work by mechanical transport or manual means or animal means including loading and unloading complete job

Providing under layer including preparation of ground 75mm thick (un compacted) layer of dry stone aggregate & grouted with sand. (Complete Job).

Providing & laying in position cement concrete of specified grade including curing but excluding the cost of cenetring & shuttering –All work up to plinth level with 1:3:6(1 Cement: 3 Coarse sand: 6graded stone agg. 20mm nominal size) .

Dumping / filling of stones including cost of stones. In horizontal on level.

Reinforcement cement concrete work in walls(any thickness) including attached pilasters,buttresses,plinth & string courses, fillets, columns, piller pires,abutments,posts & stures etc. up to floor V level excl. cost of centering, shuttering finishing & reinforcement cement concrete with 1:1.5:3 mix (1 cement 1.5 Coarse sand 3 graded stone agg. 20mm nominal size).

Steel Reinforcement for R.C.C. works including straightening, cutting, bending, placing in position and binding all complete above plinth level mild steel and medium tensile steel bars.

Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bars, ladders, railings, brackets, gates and similar works.

Centering & shuttering including strutting propping etc. & removal of form for: Foundations, footings, bases of columns etc for mass concrete.

12mm Cement Plaster of 1:6 mix (1 cement : 6 fine sand)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone aggregate.

Providing and fixing of innaugration granite Stone of size 2’-0 x 2’-6” including engraved letters and pedestal of Standard height complete job as per direction engineer-in charge.

Carriage of materials by all means including loading / unloading & stacking complete Stones

Carriage of materials by all means including loading / unloading & stacking complete. Sand

Carriage of materials by all means including loading / unloading & stacking complete. Stone aggregate below 40mm Nominal size

Raman Sharma

PAWAN KUMAR

ANIL MAHAJAN

M/S ROHIT BADYAL