PROVN OF COVERED SHEDS AT AF STN DINJAN UNDER GE(AF) MOHANBARI

Amount

Excavating over areas, n exc 1.5 m deep in soft and loose soil and getting out complete all as specified and directed

Excavating over areas, exc 1.5 m but not exceeding 3.0m in deep in soft and loose soil and getting out complete all as specified and directed

Excavation in trenches n.exc. 1.5m wide and n.exc. 1.5m. deep and getting out in soft/ loose soil complete all as specified and directed

M&L for broken stone as hard core of gauge n,exc 63mm, deposited, spread and leveled in layers n,exc 150mm thick, watered and rammed to true surface complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 with old size bricks complete all as specified and directed.

M & L for 15mm thick rendering in cement mortar 1:4 on brick/concrete surface as in external wall surface etc, finished fair and even without using extra cement complete all as specified and directed.

Material and labour RCC 1:2:4 type B-1 (using 20mm graded stone aggregate), as in slab supported on walls, beams and columns, in floors, roof landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC M-25 Design Mix Concrete in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L for RCC M-25 Design Mix Concrete in columns, pillars, piers, posts and struts etc complete all as specified and directed

M&L for formwork to sides of rough finished concrete surfaces of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed.

M&L for formwork rough finished surfaces of concrete to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) surfaces rough finished complete all as specified and directed.

M & L high strength deformed TMT steel bars 10mm dia and over as in reinforcement cut to length, bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.complete all as specified and directed.

All as per item No 14 above but 6mm to 8mm dia

M & L High strength deformed TMT steel bars 8mm dia and over as in stirrups cut to length, bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F steel work with RHS & SHS in trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 4923:(Latest amendment) complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290(Gde E-165) complete all as specified and directed.

S&F for rolled mild steel section plate girder or single stanchions,built up of one beam or channel section with flange plates, caps,bases. splices, angle brackets Fe-290(Gde E-165) fixed verticaly with other members complete all as specified and directed

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-290(Gde E-165) complete all as specified and directed.

Removal of surplus soil to a distance not exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well raming in layers, not exc 25cm thick complete all as specified and directed.

M&L for Granite (of any type) work 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like laid over and including 20 mm thick cement mortar 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L Glazed ceramic coloured tiles of size 350x 250x 7mm/ 450X 350X 7mm thick on vertical surfaces laid over and including 10mm thick rendering in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fix mild steel bolts dia of neck exc 20mm but n exc 25mm purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 30 cm long complete all as specified and directed.

Kaushik Enterprises

MAZUMDAR ENTERPRISE

M/S CHAKRA GOHAIN

Construction House

M/S HAZARIKA CONSTRUCTION

M/S S.A.Electrics

FREEZCON