Relining of Indira Gandhi Main Canal from RD 42 - RD 44 (package 243)

Amount

Cutting and burning cactus and thorny bushes and sarkanda.

Uprooting Juli Flora/ sarkanda, pahari kikar or arrows upto 0.50m depth below ground level

De-watering by pumping water to maintain desired level including cost of POL/ power consumption etc complete 10 to 19 HP

Silt clearance/ Removal of blown sand/ berm unloading undressed with combined lead up to 50m for lined canal section for FSD more than 2m

Add Extra over above item for additional lead upto 350 meters.

Extra for slush or daldal that which will support man's weight 1/3 qty. of silt clearance.

Earth work excavation in ordinary soil for main canal and branches having discharge 10 cumecs & above: Kassi work undressed.

Extra on earthwork for laying in 15 to 25 cm layears including dressing and watering as per specifications (Water to be made available by the department at one place of work site)

Ramming of earth work in layers by wooden or irom rammer as per specifications to attain a density 90% of maximum dry density.

Dressing of earthwork.

Add extra for earth taken from private land, land to be arranged by the contractor through private negotiations. Item applicable on certification by Ex. En. that no earth is available within canal boundary.for command area.

Carriage of earth for lead 1 km kachcha.

Dressing of dowels in addition to payment for dressed earth work if top width of dowel is less than 1 mtr.

Temporary compensation for the land with crop i.e. for six month period. For command area.

Rubbing and clearing the surface of existing Brick/tile lining to be used as subgrade both in bed and side slopes by means of wire brushes, water / air applied under pressure through nozzle to get rid of dirt, sand etc. deposited on it, complete in all respect, as per specifications and the instructions of the engineer incharge for preparation of surface.

Providing, Laying and spreading of HDPE geomembrane confirming to IS specifications, on sub grade including jointing and cost of jointing material. HDPE 500 Micron

Providing & laying Cement concrete lining 10 cm thick cast in situ M-15 grade (minimum cement content 322 kg per cum of concrete) ( 1cement: 2 Bajri: 4 Grit (Graded coarse aggregate 20 mm nominal size)) including use of machenical mixer, formwork & vibrator, applying primer confirming to IS :3384 in panel side,finishing etc. as per specification complete in all respect including cost of primer.In Bed including, pumping, scafflding, curing, composite weight batching, transit mixer, admixture and paver

Providing & laying Cement concrete lining 10 cm thick cast in situ M-15 grade (minimum cement content 322 kg per cum of concrete) ( 1cement: 2 Bajri: 4 Grit (Graded coarse aggregate 20 mm nominal size)) including use of machenical mixer, formwork & vibrator, applying primer confirming to IS :3384 in panel side,finishing etc. as per specification complete in all respect including cost of primer. On Side Slopes including, pumping, scafflding, curing, composite weight batching, transit mixer, admixture and paver

Providing & Laying in position cement concrete for Canal Dowel foundation including curing, compaction and cost of centering and shuttering in grade M10 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50m lead as per direction of Engineer in charge 1:4:8 or leaner mix

Providing & Laying in position cement concrete for canal dowel including curing, compaction and cost of centring and shuttring in cc M15 1:2:4 ( 1 cement : 2 coarse sand ; 4 graded stone aggregate 12-20mm nominal size.

Supply of synthetic Fibre 6/12 mm long. (125 gm packing) for mixing in cement plaster/ CC Lining/ CC floring or RCC confirming to IS specification.

Supply of Admixture in rcommended proportion confirming to IS Specification per cum of concrete.

Supply of informatory reflective sign boards out of 2mm thick MS sheet, stove enamelled paint as per IRC-67 (Latest revision) fixed on angle iron of size 65X65X6mm of 3m long. 600X800mm with size of square of 400mm.

Hiring of Light vehicle i.e. Jeep, and cars etc.

Construction of Bench Mark muttam of size 30x30x75 cms in cement concrete (1:3:6) with 750 mm long 25x25x4mm. MS angle iron embedded including cost of material, curing, transportation and fixing at site with all leads and lifts complete

S & F in position precast RCC stone (M-15 mix) of standard RCC design including finishing in cement sand mortar 1:3, painting with enamel paint, printing letters and numerals etc complete (MoRTH specification clause : 800) GUIDE STONE (RD Stone)

M/S BHANWER LAL CONTRACTOR

VARSHA CONSTRUCTION COMPANY

M/s Shera Ram Choudhary

RAJINDER SINGH CONTRACTOR

Devi sahai And Co.

JASWINDER SINGH CONTRACTOR

BABU LAL AND COMPANY

BHAWANI CONSTRUCTION COMPANY