SITC of High Mast Lights at FNV Market Jablipora Anantnag.

Supply and erection of Mild Steel Swaged Tubular Pole confirming to IS: 2713-1980 ( Part I-II) with base plate. The pole shall be made from steel tube and pipe (IS : 1141, Fe 410)including excavation of the pit and filling up the same with cement concrete of M15 Grade (1:2:4 mix) from base plate to 50 cm above ground level, earthing terminal, cable entry with 32mm dia B- class GI cable sleeves. The pole shall be painted with 2 coats of red oxide primer and 2 coats of enamel paint of silver. The job also includes the cost of form work and carriage of all required materials. (9 mtr. 410 SP-28)

Providing and fixing of detachable type round or square bracket (suitable for 6 lights) of 40 mm dia. GI pipe as per requirement.

Supply, laying, connecting and commissioning of 16 sq. mm 2 core PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade Aluminum LT cable , incl. cost of required al. thimbles duly crimped.

Providing & Fixing of IKO8 IP-66 protected high power LED flood light system with single piece Pressure die cast aluminum housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each. Integrated potted driver as a unique BIS R number having more than 85 % and in compliance to BIS certified and Trade mark certificate. The System level Luminary efficacy >=1 wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff V AC and up to resetting Safety Power Factor >0.95, THD(I) <10%, driver current) <=750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector, Surge Protection Min >24KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700k $355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/ authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from.OEM shall be submitted. (150Watt )

Supplying and drawing FRLS PVC insulated copper conductor single core cable through pole up to light.

A. 2 x 2.5 sq. mm (P + N)

B. 1 x 2.5 sq. mm (Loop/ Common earth)

Providing and fixing/ laying of earthing station by way of placing GI electrode rod in a pit connected through GI strip. (complete job)

Providing and fixing of sheet steel enclosure box ( suitable size for housing of voltage stabilizer , 40/63A DP MCB 01 no, 5-32A SP MCBs 3 nos. and a suitable connector) with knock out for cable entry / out including fixing with nut bolt fastener etc required complete in all respects to be fixed on the pole at a height of at least 8 feet from ground level.

Supply, installation, testing and commissioning of 40/63 A DP rating 240V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the enclosure box complete with necessary connections.