Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.2 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹4.8 L+₹62,702.44 (15.0%)Rejected-AOC | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | Elite Paradise promoters L1 | V.ALAGARRAJ L2 |
|---|---|---|---|---|---|
| 1.00 | Labour for cutting open road for laying water mains or sewer. B.T. Roads (or) Maccadam road (TWAD 2024-25, P.No 195, S.No.2, WD-W0739) | 1.2 | Sq.m | 929.98 ₹1,115.98 Lowest | 1,069.48 ₹1,283.38 |
| 2.00 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT (Data 2024-25. S.No 17) | 1.1 | Cu.m | 7,118.19 ₹7,830.01 Lowest | 8,185.92 ₹9,004.51 |
| 3.00 | Plastering with cement mortar 1: 5 mix 12mm thick including cost and conveyance all materials etc. complete asper standard specification. (Data 2024-25. S.No 21) | 9 | Sq.m | 267.89 ₹2,411.01 Lowest | 308.07 ₹2,772.63 |
| 4.00 | Supplying and delivery of 1.5 H.p belt compressor with motor pump set as per IS 8024/2002 including all other material and erection labour charge ect complete (Rate Taken By Quoatation) (150lpmx 50m (TWAD 2024-25, P.No:101,S.No:WD-M1577) | 3 | Nos | 38,119 ₹1,14,357 Lowest | 43,836.85 ₹1,31,510.55 |
| 5.00 | Supply and fixing of 2000 litre capacity HDPE tank with ISI make etc., complete (TWAD24-25, P.No 87 S.No.WD-M1419) | 3 | Nos | 18,772 ₹56,316 Lowest | 21,587.8 ₹64,763.4 |
| 6.00 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains including cost and convyenace etc. complete. (Electric data 24-25 P.No 34 Sd, 65) | 153 | R.m | 145 ₹22,185 Lowest | 166.75 ₹25,512.75 |
| 7.00 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains including cost and conveyance etc. complete. (Electric data 24-25,P.No:36, Sd:70) | 15 | R.m | 692 ₹10,380 Lowest | 795.8 ₹11,937 |
| 8.00 | Errection charges of 1.5 HP compressor motor with pumpset including all other accessories and Labour charges ect complete(Rate taken By Quoatation) | 3 | Nos | 2,000 ₹6,000 Lowest | 2,300 ₹6,900 |
| 9.00 | Labour Charges for inserting 150 mm/200mm/250 mm dia (M.S. Casing pipes assembly with slots or with out slots) in the drilled hole including welding the joints etc., complete and supplying and packing the annular space with pebbles of size and quality as approved by the Executive Engineers of TWAD Board. Labour charges for errection of 150mm dia pvc casing pipe (TWAD 2024-25, P.No:201, S.No:12e,WD-W0827) | 72 | R.m | 441.4 ₹31,780.8 Lowest | 507.61 ₹36,547.92 |
| 10.00 | 25mm HDPE Pipe (SOR2024-25 P.No 155,156, S.No:M-1055 ) | 455 | R.m | 64.7 ₹29,438.5 Lowest | 74.41 ₹33,856.55 |
Tender Value
₹5 L
EMD Value
₹5,000
Closing Date
24 Dec 2025, 3:00 pmClosed
COMMISSIONER
63 SAKKARAIKULAM STREET, SRIVILLIPUTHUR
Maintenance of minipower pump HDPE Tank with pipe line arrangement at ooranipatty Street, Keelapatty street , keelapatty center street in srivilliputhur
2025_MAWS_634896_1
5936/2025/E1
Open Tender
Water Supply/Equipments/Meter/Drilling/Boring
Item Rate
SRIVILLIPUTHUR
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹5,000
11 Feb 2026
22 Dec 2025
24 Dec 2025
22 Dec 2025
24 Dec 2025
22 Dec 2025
Labour for cutting open road for laying water mains or sewer. B.T. Roads (or) Maccadam road (TWAD 2024-25, P.No 195, S.No.2, WD-W0739)
Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT (Data 2024-25. S.No 17)
Plastering with cement mortar 1: 5 mix 12mm thick including cost and conveyance all materials etc. complete asper standard specification. (Data 2024-25. S.No 21)
Supplying and delivery of 1.5 H.p belt compressor with motor pump set as per IS 8024/2002 including all other material and erection labour charge ect complete (Rate Taken By Quoatation) (150lpmx 50m (TWAD 2024-25, P.No:101,S.No:WD-M1577)
Supply and fixing of 2000 litre capacity HDPE tank with ISI make etc., complete (TWAD24-25, P.No 87 S.No.WD-M1419)
Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains including cost and convyenace etc. complete. (Electric data 24-25 P.No 34 Sd, 65)
Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains including cost and conveyance etc. complete. (Electric data 24-25,P.No:36, Sd:70)
Errection charges of 1.5 HP compressor motor with pumpset including all other accessories and Labour charges ect complete(Rate taken By Quoatation)
Labour Charges for inserting 150 mm/200mm/250 mm dia (M.S. Casing pipes assembly with slots or with out slots) in the drilled hole including welding the joints etc., complete and supplying and packing the annular space with pebbles of size and quality as approved by the Executive Engineers of TWAD Board. Labour charges for errection of 150mm dia pvc casing pipe (TWAD 2024-25, P.No:201, S.No:12e,WD-W0827)
25mm HDPE Pipe (SOR2024-25 P.No 155,156, S.No:M-1055 )
SINGLE PHASE PANEL BOARD WITH TWO LEVEL GUARD AND AUTO START 1.5 hp panel board Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended there after with suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (TWAD24-25 P.No 119, S.No: WD-M1906 )
32mm GI Equal Tee plain (TWAD 2024-25 P.No 32,S.no WD-M0595)
40 x 32mm PVC Reducer (SOR 2024-25 P.No 148,S.no.0913)
25mm G.I Reducer (TWAD 2024-25 P.No 32,S.no 1WD-M0607)
25mm GI Equal Tee plain (TWAD 2024-25 P.No 32,S.noWD-M0595)
25mm G.M. Gate valves (TWAD 2024-25 P.No 33,S.no:WD-M0618)
25mm G.I Elbow (TWAD 2024-25, P.No 32,S.NoWD-M0594)
25mm G.I Bend (TWAD 2024-25 P.No32,S.no WD-M0602)
32mm Poly Propylene compression Male Threaded Adaptor MTA (TWAD 2024-25 P.No 42,S.no V WD-M0814)
32mm Poly Propylene Female Threaded Adaptor (FTA) (TWAD 2024-25 P.No 42,S.no iV WD-M0811)
PVC Adhesive (Solution) 100gram (TWAD 2024-25 P.No 87,S.no:M-0519)
32mm HDPE Pipe (SOR2024-25 P.No 155,156, S.No:M-1056 )
6' Casing Pipe Bore cap using M.S. Flat of size 1 cm x 3 mm and M.S sheet on top with bolting arrangements for securing the cap in position (Bore caps with M.S. Couplings need not be made) (TWAD 2024-25,P.No:195, S.no:BWD-W0737 )
1/2" MS/ Hose Coller (Quatation Rate)
1/2" Hose Clip (Quatation Rate)
32mm GI Coupling (TWAD2024-25, P.No:32, S.no:WD-M0596)
32mm GI Elbow (TWAD2024-25, P.No:32, S.no:WD-M0594)
32mm GI Union (TWAD2024-25,P.No:32,S.no:WD-M0603)
32mm PVC ELBOW (TWAD2024-25,P.N-10,S.no-WD-M0112)
32MM pvc Pipe (SOR 2024-25 P.No 146,147S.no.M0877)
40mm M.S ClampSet (TWAD2024-25, P.N:32, S.no:WD-M0617)
Tower Bolts of various lengths and diametre (with required screw) 75mm long and 10mm dia (75 x 10 Bolt) (SOR2024-25,P.N-78,S.no-M-0342)
32mm CPVC Tank Nipple (Quatation Rate
25mm G.I Elbow (TWAD2024-25,P.N:32,S.no-WD-M0594)
Reaper nails (40mm long) (TWAD2024-25,P.N-234,S.no-MW-M0241))
Supply and fixing 20mm G.I pipe for following materials (TWAD 24-25, P.No 27, S.No:WD-M0485)
Supply and fixing 25mm G.I pipe for following materials (TWAD 24-25, P.No 27, S.No:WD-M0486)
20mm G.I Pipe Cutting of GI pipes including cost and conveyance of all materials (SOR 2024-25 p.no 33, S.no:W-0125)
20mm G.I Pipe Threading of GI pipes including cost and conveyance of all materials (SOR 2024-25 p.no 33, S.no:W-0126)
25mm G.I Pipe Cutting of GI pipes including cost and conveyance of all materials(SOR 2024-25 p.no 33, S.no:W-0127)
25mm Pipe Threading of GI pipes including cost and conveyance of all materials (SOR 2024-25 p.no 33, S.no:W-0128)
TW plank of size 375mm x 300mm x 19mm with supporting reepers of 1" thick on both side with painting and with bolt, nut and washer Meter Board (Electrical Data 2024-25,P.N-55,SD-125)
Supply and fixing of 32ATPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only (Electrical Data 2024-25,P.N-64,SD-148)
100A Triple Pole MCB (SOR 2024-25,P.N-194,S.no:7, M-1785)
40 Amps 30 MA DP 2 pole RCCB (SOR 2024-25,P.N-195,S.no:10, M1805)
20mm G.I Elbow (TWAD 24-25, P.No 32, S.No:WD-M0594)
Supply and run of 25mm x6mm tinned copper flat with necessary clamps /supports on wall /floor /ground for earth connection (Electric data 2022-23 P.No :43 SD:77)
PVC Insulation Tape (19mm) (SOR 2024-25,P.No89,S.No 8M-1682-
20mm G.I Bend (TWAD 2024-25 p.no :32,S.No WD-M0602)
Supply and run of 2x1.5sq.mm. (22/0.3)PVC insulated SC unsheathed copper conductor of 1100 V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains (Elec Data 2024-25, P.NO: 35,SD69)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_759720.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.48 MB
BOQ_759720.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .