Conversion of HT/LT OH Line into HT and LT UG Cable in theTemple Car Procession Street of Arulmigu Koniamman Temple in Bazaar/ West, Bazaar/East and Town hall section of central Division in respect of Coimbatore EDC/ Metro Circle

Amount

Dismantling of LT 3 Ph channel x arm

Dismantling of LT 1 Ph channel x arm

Dismantling of RSJ Pole 36 feet

Dismantling of RSJ Pole 30 feet

Dismantling of 11 KV Strain Disc with MP

Dismantling of 11KV Pin with insulator

Dismantling of stay set complete with guy shackle

Dismantling of ACSR 7/2.59mm conductor

Dismantling of ACSR 7/3.35mm conductor

Dismantling of ACSR 7/4.09mm conductor

Dismantling of LT pin insulator

Dismantling of LT shackle with MP

Dismantling of Alu knob.

Erection of RSJ Joist pole 36 feet

Erection of V X arm

Erection of HT TI Fitting

Top 10 ft Centre

Structure Earthing

Structure Concreting

HT Portion: Earth work excavation in all kind of soils within an initial of 10m and lift of 2m in trenches (Narrow pits) less than 1m width

Removing the Blacktopped road surface including the cost for providing signal boards, lights,watch and ward to regulate the traffic, taking all precautions to protect the men, materials and the public fromo any possible accidents etc.,using JCB/Air compressor (or) drilling machines etc., wherever necessary (at anytime throughout the day) including taking all precautions to prevent any damages to the Telecom and Water lines.

Providing crusher dust instead of sand with good quality to a depth upto 150mm (6") including cost of materials, labour, leads and lifts etc., complete.

Refilling with excavated earth consolidating in layers and the top brought for line with the existing surface including cost of labour, lead, lift etc., complete.

Supplying of 11 KV RCC "V" troughs and laying over the UG cable to propper grade and alignment inside the cable trench, printing letters of not less than 75mm on either side of the troughs as directed by the engineer incharge of works including the cost for all materials , transporting of troughs from the source to the destination upto 10kms, steciling, paints brushes all leads and lifts etc.., complete.

Supplying, laying, jointing and fixing in position cement pipes of 225 mm dia in size in the excavated cable trench as directed by the Engineer incharge at site, including the cost of rope, sealing the ends with cement mortar, labour, lead, lifts etc complete.

Uncoiling and laying of 11KV cable in the excavated trench including drawing the cable through RCC / GI/ PVC pipes wherever necessary at road crossings etc.., without any damage. Including transporting of cables tools and plants labour, lead lift etc.., complete.

Transporting of the remains of the empty cable drums (iron materials) to the stores for devolution including loading and unloading, leads and lifts, etc., complete.

Supply and erection of cable marker in RCC (1:2:4) using 20mm HBS metal of size 0.3m x 0.60m and of 100mm thick, engarving letters "TNEB UG CABLE" Painting the engraved letters, fixing the Cable Marker in a bed of PCC (1:3:6) using 20mm HBS Metal of size 0.45m x 0.30m x 0.45m including cost of all materials, labour, Transporting to the destination, all leads and lifts etc., complete.

Erection of 11 KV 3x300 Straight joint Kit

Erection of 11 KV 3x300 sqmm Outdoor End Termination Kit & 3x120 sqmm Outdoor End Termination Kit

UG Cable earthing by coil earthing

LT Portion: Earth work excavation in all kind of soils within an initial of 10m and lift of 2m in trenches (Narrow pits) less than 1m width

Cutting open the Blacktopped road surface including the cost for providing signal boards, lights,watch and ward to regulate the traffic, taking all precautions to protect the men, materials and the public fromo any possible accidents etc.,using JCB/Air compressor (or) drilling machines etc., wherever necessary (at anytime throughout the day) including taking all precautions to prevent any damages to the Telecom and Water lines.

Providing crusher dust instead of sand with good quality to a depth upto 150mm (6") including cost of materials, labour, leads and lifts etc., complete.

Refilling with excavated earth consolidating in layers and the top brought for line with the existing surface including cost of labour, lead, lift etc., complete.

RCC 11 KV "V" troughs and laying over the UG cable to propper grade and alignment inside the cable trench, printing letters of not less than 75mm on either side of the troughs as directed by the engineer incharge of works including the cost for all materials , transporting of troughs from the source to the destination upto 10kms, steciling, paints brushes all leads and lifts etc.., complete.

Supplying, laying, jointing and fixing in position cement pipes of 225 mm dia in size in the excavated cable trench as directed by the Engineer incharge at site, including the cost of rope, sealing the ends with cement mortar, labour, lead, lifts etc complete.

Uncoiling and laying of LT cable in the excavated trench including drawing the cable through RCC / GI/ PVC pipes wherever necessary at road crossings etc.., without any damage. Including transporting of cables tools and plants labour, lead lift etc.., complete.

Transporting of the remains of the empty cable drums (iron materials) to the stores for devolution including loading and unloading, leads and lifts, etc., complete.

Supply and erection of cable marker in RCC (1:2:4) using 20mm HBS metal of size 0.3m x 0.60m and of 100mm thick, engarving letters "TNEB UG CABLE" Painting the engraved letters, fixing the Cable Marker in a bed of PCC (1:3:6) using 20mm HBS Metal of size 0.45m x 0.30m x 0.45m including cost of all materials, labour, Transporting to the destination, all leads and lifts etc., complete.

Laying of LT cable of all sizes for service connection including excavation of trench,Laying of cable ,refilling of trench & termination of cable complete(25 sqmm & 16 sqmm)

Construction of RCC pedestal of size 0.75 x 0.25 x 1.05m (2 Nos) for fixing 6 way pillar box with 15.76 kgs of steel reinforcement in 0.394m 3 of ROC (1:2:4) mix concrete using 20mm HBS metal , plastering (1:5) 12 mm thick around the pedestal colour washing two coats over one coat of primer using white cement including cost of all materials, labour, transportation of all materials of size, fixing the pillar box in proper alignment over the pedestal, tools and plants, lead, lift, etc., complete. 6 way pillar box.

Construction of RCC pedestal of size 0.60 x 0.25 x 1.05m (2 Nos) for fixing 4 way pillar box with 13.88 kgs of steel reinforcement in 0.315 m3 of ROC (1:2:4) mix concrete using 20mm HBS metal, plastering (1:5) 12 mm thick around the pedestal colour washing two coats over one coat of primer using white cement including cost of all materials, labour,transportation of all materials of size, fixing the pillar box in proper alignment over the pedestal, tools and plants, lead, lift etc., complete. 4 way pillar box.

Construction of RCC pedestal of size 0.60 x 0.25 x 1.05m (2 Nos) for fixing Mini pillar box with 13.88 kgs of steel reinforcement in 0.315 m3 of ROC (1:2:4) mix concrete using 20mm HBS metal, plastering (1:5) 12 mm thick around the pedestal colour washing two coats over one coat of primer using white cement including cost of all materials, labour,transportation of all materials of size, fixing the pillar box in proper alignment over the pedestal, tools and plants, lead, lift etc., complete. Mini pillar box.

Painting two coats of enamal emulsion paint over one coat of metal white primer for 6 way pillar boxes by using spray paint including cost of materials, lead, lift, labour etc., complete.

Painting two coats of enamal emulsion paint over one coat of metal white primer for mini pillar boxes by using spray paint including cost of materials, lead, lift, labour etc., complete.

Supplying and pasting of stencil cut stickers with good adhesives with lettres showing ''TNEB, 440 V and Danger with Skull and Bone symbols'' etc including cost all materials, lead, lift, labour etc., complete. (LMR)

Pillar box Coil Earthing

SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only