Special repair to block B, 5th floor at IGMC Shimla. For shifting of Gynee Department from KNH to IGMC and Robotic Surgery in IGMC Shimla. SH Repair of flooring, providing aluminium work for partition of changing room, Doctor duty room, sister duty r

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within 20 metres lead Not exceeding 3 sqm in area

Dismantling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within all leads (wooden/concrete joists to be measured and paid for separately) For all thickness of tiles including carriage of materials in all leads and lifts

Dismantling wooden boardings in lining of walls and partitions, floors including frame work and stacking the materials with in all leads including carriage of materials in all leads and lifts:- Thickness 10mm and upto 25 mm

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) complete including carriage of materials in all leads and lifts

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering , inishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size). including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges.

Centering and shuttering including strutting, propping etc. and removal of form for all heights :Suspended floors, roofs, landings, balconies and access platform including carriage of materials in all leads and lifts

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all floor level including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges.(i) Thermo-Mechanically Treated bars of grade Fe-500D or more.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand). including carriage of materials in all leads and lifts

Providing and fixing 40 mm thick panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws etc. .complete including carriage of materials within all leads and lifts.in 2nd class deodar wood

Providing and fixing 6mm thick ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately including complete including carriage of material in all leads and lifts

Providing and fixing 19 mm thick commercial board water proof in shelves, lining, box for cup boards with butt joints fixed with nails and screws etc complete including carriage of material in all leads and lifts

Providing and fixing 19 mm thick commercial board water proof shutter for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of material in all leads and lifts

Providing and fixing 4 mm thick teak ply wood lining / panelling with butt jointing and nails (frame work and cover fillets to be measured and paid for separately including complete including carriage of material in all leads and lifts

Providing and fixing water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) 12mm thick including carriage of materials within all leads, lifts and other incidentals

Providing and fixing hard wood plain square edged cover fillets (beading) 60mmx12mm section with wood screws in ceiling and lining including mitring at junctions including carriage of materials in all leads and lifts.ist class deodar wood.

Providing and fixing plain cement asbestos sheet of superior quality(frame work to be measured and paid for seperatly) including carriage of material within all leads and lifts

Providing and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary including carriage of materials within all leads and lifts:- Plain Glass: 6mm thick coloured glass. including carriage of materials in all leads and lifts

Providing and fixing brass Sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16mm

Providing and fixing brass tower bolts (barrel type) with necessary screws etc. complete : including carriage of materials within all leads and lifts.(i) 150x10mm

Providing and fixing brass handles, ISI marked,or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials in all leads and lifts

Providing and Fixing of Drawer Lock ( Godrej) of approved brand including carriage of materials within all leads and lifts.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials in all leads and lifts

Supply installation testing and commissioning of flooring seamless with perfectly curved flash-covering, resistance to mechanical stress and dynamic loads and having ESD/EMI (conductive) protection characterstics, 2mm thick wasable (Make Jiofior)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600mm X 600mm.

Providing and fixing 300mmx300mm1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and laying marble work (Table rubbed and polished) in flooring 20mm. thick base in cement mortar 1:3(1cement:3sand) including jointing with cement mortar 1:2(1 white cement:2 marble dust) with an admixure of pigment to match the shade of the marble. 20 mm thick Baroda green marble including carriage of materials within all leads and lifts

Providing round/half round moulding/nosing over edge of marble/granite work or kota stone etc. duly polished in mirror finish as per the direction of Engineer-in-Charge complete including carriage of materials within all leads and lifts

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 5.0 mm thickness (weight not less than 12.5 kg/ sqm) including carriage of materials within all leads and lifts.

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge

Providing and fixing aluminium Sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16mm

Providing and fixing aluminium tower bolts (barrel type) with necessary screws etc. complete : including carriage of materials within all leads and lifts.(i) 150x10mm

Providing and fixing aluminium handles, ISI marked,or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials in all leads and lifts size 125mm

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth InCement Mortar 1:6 (1Cement:6 Sand).including carriage of materials within all leads and lifts

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials within all leads and lifts

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade (New work) Two or more coats applied complete including carriage of materials in all leads and lifts

Painting Wood work with Deluxe Multi Surface Paint of required shade Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete including carriage of materials in all leads and lifts

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - 15mm nominal bore

Providing and fixing 110mm high pressure PVC Finolex (Type-B) spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc. complete including carriage of materials within all leads and lifts

Providing and fixing 110mm PVC finolex (Type-B) plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts

Providing and fixing 110mm PVC finolex (Type-B) collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc.complete including carriage of materials within all leads and lifts 110mm x 75mm

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. including carriage of materials within all leads and lifts

Providing and fixing 610mm x510 mm bowl depth 200mm size Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board complete including carriage of materials within all leads and lifts.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing & fixing 32mm dia, PVC waste pipe for wash basin or sink including carriage of materials within all leads and lifts

Providing and fixing 45cm length UPVC connection pipe with brass unions 15 mm nominal bore complete including carriage of materials within all leads and lifts.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.including carriage of materials within all leads and lifts

Providing and fixing seat cover (European) solid back & white colour complete including carriage of materials within all leads and lifts

Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of materials within all leads and lifts

Providing and fixing 600x450 mm beveled edge mirror of superior glass of approved quality complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including carriage of materials within all leads and lifts

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete including carriage of materials within all leads and lifts

Providing and fixing charomium plated soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials within all leads and lifts

Providing and fixing C.P. Brass Towel ring complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws including carriage of materials within all leads and lifts

Providing and fixing Sink mixer of approved quality including fittings etc. complete including carriage of materials in all leads and lifts

Providing and fixing Basin mixer of approved quality including fittings etc. complete including carriage of materials in all leads and lifts

Providing and fixing 15mm dia C.P.brass Angle cock of approved quality including carriage of materials within all leads and lifts.

Providing and fixing 15mm dia C.P.brass Bib cock of approved quality including carriage of materials within all leads and lifts.

Disposal of building rubbish/ malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 mm initial lead, for all leads including all lifts involved