Renewal of Dada Nahar to bargadhi Ganwariya Road Lot 14 of 179

WBM Grading-3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3, As per MORD Specification & Clause No. 405(A), 4.7(3)(A) complete in all respect as per directions of Engineer in charge. (Including Labour Cess & Roylty) (GST will be paid extra as applicable)

Tack Coat Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom, As per MORD Specification & Clause No. 503, 5.2(ii) complete in all respect as per directions of Engineer in charge. Including cost of Bitumen (Including labour cess) & (GST will be paid extra as applicable)

20mm. Thick open-graded premix carpet 20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C. As per MORD Specification & Clause No. 508 Case - I By Manual Means (I) Bitumen (S-90), 5.9 Case I(I) complete in all respect as per directions of Engineer in charge. Including cost of Bitumen (Including labour cess) & (GST will be paid extra as applicable)

Seal Coat Type 'C' Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C. As per MORD Specification & Clause No. 510 A. By Manual Means Bitumen (S-90), 5.12 By Manual Case-III-Type c(I) complete in all respect as per directions of Engineer in charge. Including cost of Bitumen (Including labour cess) & (GST will be paid extra as applicable).

Please Enable Macros to View BoQ information