SPECIAL REPAIR TO CERTAIN SMQs AT AF STN PALAM

Amount

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for ceramic coloured/ printed non-skid tiles of size 7 to 8 mm thick ( square / rectangular ) area of each tile exceeding 0.06 Sqm but n. exc. 0.11 Sqm laid as in floors setting and jointed with neat cement slurry over & including 15 mm thick screed bedding layers of cement sand mortar ( 1:4) and pointed with coloured cement to match with surfaces of tiles complete all as specified and directed.

M&L for ceramic coloured/ printed non-skid tiles of size 7 to 8 mm thick( square / rectangular ) area of each tile exceeding 0.11 Sqm but n. exec. 0.18 Sqm laid as in floors setting and jointed with neat cement slurry over & including 15 mm thick screed bedding layers of cement sand mortar ( 1:4) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed

M&L for coloured glazed ceramic tiles in vertical surface of Size 350x 250 x7 mm /450x350x7 mm /400x300x7 mm set and jointed in neat cement slurry over 10 mm thick cement rendering in cement mortar 1:4 and pointed in white or colour cement to match with surfaces of tiles complete all as specified and as directed

Taking down cement or cement lime plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without extra cement as on wall complete all as specified and as directed

M&L for 10 mm thick cement plaster in cement mortar 1:3 as on ceiling & plastering to be finished even & smooth without using extra cement complete all as specified and as directed

M&L for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as on wall complete all as specified and as directed

M&L for two coat of cement base paint after preparation of new plastered surfaces as on wall complete all as specified and as directed

M&L for preparation of plastered or unplastered new surfaces of ceiling and applying three coat of white wash complete all as specified and as directed

M&L for two coat of oil bound distemper over a coat of primer after preparation of new plastered surfaces complete all as specified and as directed

S&F in repair PVC flushing cistern of 10 ltrs capacity valveless, syphonic action type, low level, white, with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore and connection to pipes etc complete all as specified and as directed

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed

All as per Srl item No-13 here-in-before but of length 450mm complete all as specified and as directed .

S&F in repair PVC waste pipe 32mm dia & 750 mm long, suitable for couplings 32mm & 40mm dia complete all as specified and as directed

S&F in repair vitreous china squatting pan (orissa Pattern) white size 580x440 mm with integral foot rest and fixed as per manufacturer’s instructions complete all as specified and as directed . Make:Cera/Hindware/parryware .

S&F in repair wash hand basin, vitreous China, flat back 550x400mm size, excluding taps,waste ,chain and plug and porcelain stopper but including brackets complete all as specified and as directed

M&L for replacement of 100 mm CI floor/nahani trap with grating including jointing and breaking/ dismantling any type of floor and making good with cement concrete type B-1 (1:2:4) using 12.5mm graded stone aggregate and testing after repairs and taking down existing trap etc complete all as specified and as directed

S&F in repairs Bends, diminishing pieces or tapers for CI pipes 100mm bore, complete all as specified and as directed

S&F in repair 100mm bore Cast iron , waste and vent pipes in any length with or without ears, with cement joints and fixed to walls complete all as specified and directed.

S&F in repairs chromium plated shower roses with or without swivel joints any size including fixing to 15mm bore steel pipe or union complete all as specified and as directed

S&F for 100mm bore PVC branch pieces, single (equal or unequal) ordinary or inverted or with parallel branches complete all as specified and as directed

Taking down PVC rain water pipe up to 4 storey building complete all as specified and as directed

S&F 110mm dia, PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps as approved complete all as specified and as directed

S&F PVC (SWR) bends, 110mm dia fixed to PVC pipes complete all as specified and as directed

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples, wooden beads in wooden/ steel window or doors complete all as specified and as directed

S&F 250 mm aluminium sliding door bolt,with hasp ,staple bolt type and fixing clips at sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium complete all as specified and as directed

S&F in repair MS powder coated 20 mm dia curtain rod including brackets and end knobs / finials complete all as specified and as directed

S&F double legged door stopper 150 mm of aluminium alloy body and tongue, anodised with hard drown steel spring complete all as specified and as directed

S&F in repair, brass chromium plated tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges complete all as specified and directed.

S&F in repair grating square 150mm size of PTMT complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden or steel or aluminium frames glazed with putty or fixed with wooden/Aluminium beads complete all as specified and directed.

S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads including provision of glazing pins/spring clips wherever necessary in squares ,not exc 0.5 sqm in each pane complete all as specified and as directed

Taking up or down 15mm dia steel tubing, and connections in walls, ceilings, floors, etc including cleaning for refixing or removal to store complete all as specified and as directed.

M&L for GI tubing, 15mm bore 'medium grade' with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed

Taking up or down dia steel tubing, and connections in walls, ceilings, floors, etc including cleaning for refixing or removal to store complete all as specified and as directed.

M&L for GI tubing, 20mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F in repairs bib taps with wall flange 15mm bore , chromium plated fancy type cast copper alloy with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule complete all as specified and directed.

M&L in repairs for 15 mm dia stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both side for iron pipe or for union and fixed complete all as specified and directed.

S&F in repairs, 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair corner glass shelf with 12mm thick glass with bracket complete all as specified and directed.

S&F stainless steel plate rack of size 780mmx760mmx250mm and 25 SWG thickness, weight not less than 9 Kgs/Each with all fittings and fixed to walls complete all as specified and directed.

Taking down chowkhat or frame n exc 1.5 sqm each but with shutters (without taking off shutter from the frames) complete all as specified and directed.

Taking down chowkhat or frame exc 1.5 sqm and n exc. 4.00 sqm each but with shutters (without taking off shutter from the frames) complete all as specified and directed.

S&F framed work as in door or gates of angle of Fe 410-W(Gde-E-250 quality A section with gusset plates rails braces etc complete ,drilled for fixing of steel sheeting or other covering ,doors etc to be prepared for hanging or sliding with and including hooks and hinges or steel hanging door fittings also fastening and fixing complete all as specified and directed.

S&F for 35 mm thick 2nd class hardwood factory made plain framed paneled shutter (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick 2nd class hardwood factory made, glazed and skelton shutter, open rebated and prepared to received glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section-8, Clause 8.24(a), fitted to chowkhat complete all as specified and directed.

S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet, strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement in the frame at site complete all as specified and directed.

S&F factory made solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube incl fixing in opening complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section length of bolt 200mm complete all as specified and directed.

S&F aluminium handles, cast type 125mm size anodized and fixed complete all as specified and directed.

S&F for 100mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed.

Demolition of mud phuska in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) complete all as specified and directed.

Demolition of brick tiles or terracing tiles,single layer on roofs any thickness complete all as specified and directed.

M&L for 15 mm thick screed bed on concrete surface in cement plaster 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for providing cement concrete PCC (1:2:4) type B1 using 20mm qraded stone aggregate as in roof padding/ kerbs complete all as specified and directed.

M&L for APP based modified pre fabricated five layer 3 mm thick and weighing not less than 3.6 Kg/Sqm water proofing membrane reinforced with polyester non woven fabric mat with 160 gm/Sqm black finished with compatible primer conforming to IS 3488 @ 0.30 Lit/ Sqm before laying membrane laid by torch application side overlap of 75 mm and over lap of 100 mm longitudinally, at the junction of roof and parapet wall a grove of 20 x 20 mm shall be made at the ht of 100 mm and membrane shall be inserted and sealed with bituminous mastic joints/overlap shall be salted with hot bitumen 85/25. Two coat of water proofing bituminous aluminium paint on top of APP membrane shall be applied complete all as specified and directed.

M&L for cement concrete tiles 25cmx25cmx22mm thick ,machine pressed with grey cement and no pigment laid over 15mm thick cement screed bed in cement mortar 1:4 ,set jointed in neat cement slurry in floors /roof , and cut and polished complete all as specified and directed.

M&L for 20mm thick Granite (of jet black ) work (table rubbed and polished ) in steps ,jambs ,pillars,window cills, cooking platforms and like fixed in cement mortar 1:4, 15mm thick including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including exposed edges to make half round complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. any type complete all as specified and directed.

Taking down unserviceable sub main wiring with conduits/battens etc complete all as specified and directed.

M&L for Point wiring with single core PVC insulated but unsheathed 1.5 Sqmm FRLS multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC conduit medium grade not less than 20 mm dia in concealed wiring system including necessary cutting, chasing and making good disturbed surface of wall ISI with all conduit fittings and fixing accessories including pressed steeI boxes with bakelite sheet for mounting switches, sockets, fan regulators, etc and earth wire single core PVC insulated but unsheathed multistrand copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLS cable connecting to common earth dolly complete all as specified and directed for the followings.

(a) One light point controlled by one switch one way

(b) One fan/exhaust fan point controlled by one switch.

(c) One socket outlet 5 Amp controlled by one switch on independent board

(d) One 3 pin 5 Amps socket out let point on the same board controlled by one switch complete

(e) One bell point controlled by one bell push 5 Amps

All as per Srl item No 62 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sqmm stranded copper conductor cable PVC insulated including earth wire 2.5 Sqmm copper conductor cable connected to earth dolly complete, all as specified and directed.

S&F ceiling rose, surface type, 65mm x 50mm, 3 terminal complete all as specified and directed.

S&F electric ding dong bell, 230 volt AC, single pole complete all as specified and directed.

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F stepped fan regulator 300 watt, 230 volts, 50 HZ, AC complete all as specified and directed.

S&F switch piano flush type 5 Amps, single pole one way complete all as specified and directed.

S&F socket outlet 3 pin 5 Amps, flush type complete all as specified and directed.

S&F switch piano flush type single pole one way15 Amps complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5/15 Amps, flush type complete all as specified and directed.

S&F flush type bell push, 5 Amps complete all as specified and directed.

S&F indoor decorative LED battens- integrated type 20 watt 4 feet white fixture with extruded aluminium body, suitable for LED tube 20 watt , bi-pin holder, connector block, LED rod 20 watt etc complete with all accessories internally are wired and including connecting up with twin core copper conductor cable complete all as specified and directed.

S&F LED bulb 7 watt fixed in pendent holder/bulk head complete all as specified and directed.

S&F sheet metal enclosure for distribution board SPN (when MCBs to be used ) 8 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and directed.

S&F vertical type load line distribution board, double door ,4 way, AC, 3 phase, 415 volts, TPN bus bar 200 Amps rating and earth bar & din rail suitable for accommodation of MCCB 100/125 Amp, 16KA 4 pole as incomer complete all as specified and directed.

S&F MCCB, 4 pole 100A, 16KA complete all as specified and directed.

S&F MCB, SPN, 40A ,10KA complete all as specified and directed.

S&F MCB, SP, 6-32A ,10KA complete all as specified and directed.

S&F MCB, SP 40 Amp ,10KA complete all as specified and directed.

S&F singIe poIe and neutraI encIosure 240 VoIts with two pin and earth pIug and socket compIete with one singIe poIe MCB of 10 Amps rating complete all as specified and directed.

M&L for sub main wiring with two single core 6.0 sqmm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 6.0 sqmm PVC insulated FRLS multistranded copper conductor cable as continuous earth wire complete all as specified and directed.

M&L for earthing complete for building with galvanized mild steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in cement mortar 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified and directed.

Taking down carefuIIy water heater storage type, electric ,capacity 25 Iitres carefully and depositing to the MES store and refixing the same after completion of B/R work complete all as specified and directed.

Taking down ceiling fans/exhaust fans of any sweep and any size including cable connections and disconnecting of fan blades and removing the fan with blades and refixing after cleaning at site complete all as specified and directed.

Atish Builders LLP

Shiv Shankar Nirman Co.

Commercial Traders

SHEELSONS ENTERPRISES

M/S Davinder Kumar

Parveen Builders