PROVN OF PARKING SHED FOR 10 CARS AND 15 MOTORCYCLES IN 25 BLOCK FOR OFFRS SINGLE ACCN AT AEC TRG COLLEGE AND CENTRE

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, Getting out hard Rock.

Supply and fixing MS hollow section as in vertical post and struts in fencing including cutting tops to shape as required , drilling holes, notching for wire etc. including flat iron fillets with nuts and bolts for securing chain link fencing, nosing of steps embeded in concrete and screwing etc. including all necessary drilling, bolting or riveting, etc.and similar works conforming to Fe-290 (Gde E-165) complete all as specified and as directed.

M&L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases)all as specified and direcetd.

S & F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W including welidng cleats,distance pieces etc.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Material & labour for two coats of synthetic enamelled paint over a coat of red oxide on new steel surfaces exc 10cm width or girth including preparation of surfaces.complete all as specified and directed by Engr In Charge.

S & F Roof plates with sleeve pieces riveted or welded thereto, and similar roof and ceiling connections complete all as specified and as directed

S & F for 12mm Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long complete all as specified and as directed

Material and labour for 75mm thick PCC 1:2:4 type B-2 (using 20 mm graded mechanically crushed stone aggregate) as in floor/pavement complete all as specified.

M&L Forming Construction joint 30mm deep x 10mm wide with grade 'B' and filled with sealing compound complete all as specified.

DEEPAK JAISWAL (BID ID -3069561)

M/s DS Khekde (BID ID -3080006)

Dev Enterprises (BID ID -3074796)

SUBIR KUMAR ROY (BID ID -3079501)

GHASI RAM SAHU (BID ID -3072111)