REPAIR OR REPLACEMENT AND AMC OF WATER SUPPLY AUTOMATION SYSTEM AND ALLIED WORKS AT HQ EAC (U) AF UNDER GE (I) (AF) SHILLONG

AMC / Outsourcing the resources for Monitoring, Management, and Operation of water supply management system. It includes providing the manpower 01 No. company trained technician for smooth functioning of complete auto system (OEM of PLC Panels and Motorized Valves) for successful working of the system under GE(I)(AF) Shillong complete all as specified and directed. (i). Automation Main Panel at Pump House No -1. (ii). Automation Mimic Panel at Pump House No -1. (iii). Automation Slave Panel at Officer Md Accn PS Tank Area - 01 No. (iv). Automation Slave Panel at SNCO's PS Tank Area - 01 No. (v). Automation Slave Panel at CPL PS Tank Area - 01 No. (vi). Automation Slave Panel at Officer Mess PS Tank Area - 01 No. (vii). Automation Slave Panel at Camp PS Tank Area - 01 No. (viii). Automation Slave Panel at Command Bldg - 01 No. (ix). Automation Slave Panel at 792 SU - 01 No. (x). Automation Slave Panel at Airman Mess PS Tank - 01 No. (xi). Automation Slave Panel at PVC Tank Officer Mess HQ EAC(U) - 01 No. (xii). Automation Slave Panel at KV School - 01 No.

Comprehensive maintenance shall include the following: (a) Servicing and maintenance /repair and replacement of defective components /spare parts with new one of PLC based control panels including all accessories modem, antenna etc. installed at various pump houses, OHTs and Master control station. (b) Repair/maintenance by disconnecting, cleaning, greasing for wear and tear, complete servicing, refixing, lathing, installing and commissioning as directed by Engineer-in-Charge of all motorised valves, pressure transmitters, magnetic level sensors. (c) Any changes to the Programmable Logic Controller (PLC), e.g. Changes in ladder logic of programme, changes in operational timing, etc. (limited to the scope of items covered under this AMC). (d) Any changes to the SCADA software, e.g. Changes in report format, changes in operational screens, creation of soft keys etc. (limited to the scope of items covered under this AMC). (e) Attending break down maintenance and replacement of unserviceable spare parts with new ones as required at site complete all as specified and directed by Engineer-in-charge

3. Any changes to the Programmable Logic Controller (PLC), e.g. Changes in ladder logic of programme, changes in operational timing, etc. (limited to the scope of work covered under this AMC) shall be carried out by authorized representative of M/s Universal Switch Gear Control. The programmer shall submit a letter from the manufacturer as proof of his being an authorized representative of the manufacturer. The programmer shall also submit a signed report on original letterhead of the manufacturer that servicing has been carried out by him. 4. Any changes to the SCADA software, e.g. Changes in report format, changes in operational screens, creation of soft keys etc. (limited to the scope of work covered under this AMC) shall be carried out by authorized representative of M/s Universal Switch Gear Control.. The technician shall submit a letter from the manufacturer as proof of his being a authorized representative of the manufacturer. 5. Repairs to pump sets, starters, controls, valves etc are not in the scope of work. Un-serviceabililty of the same shall be intimated to the concerned JE/ Engineer-In-Charge E/M for repairs. In such situation the breakdwon period before the pumpsets put into working condition will not be considered as default of the contractor.

All the notes given vide 1.02, 1.03 above shall also be read in conjunction with the following: (A) The repair and maintenance of SCADA system should be done through OEM (M/s Universal Switch Gear Control) or through the authorised service provider of the OEM. (B) Before acceptance of tender, the successful bidder shall submit a Memorandum of Understanding (MoU) from OEM in a non-judicial stamp paper of Rs 10.00 duly notorised with an undertaking stating that execution of all SCADA related items of work shall be carried out under technical support and guidance of OEM. (C) Maintenance if any, shall be operational within 24 hours from the happening. In case, the contractor shall not carried out the same within 24 hours then per day Rs/-1000 penalty upto 01 week afterwards Rs/-2000 penalty per day will be charged to the contractor. No extra cost shall be paid by the Govt to the contractor for such failure.

Supply of Single Phase Preventor with Under and Overvoltage Protection complete all as specified and directed. Make : Recommended by OEM

Supply of Relay Card Single C/O, 24 V DC all as specified and directed. Make : Recommended by OEM

Supply of Relay with Base 2 C/O, 240 V AC all as specified and directed. Make : Recommended by OEM

Supply of Relay with Base 2 C/O, 24 V AC all as specified and directed. Make : Recommended by OEM

Supply of 22 mm LED Indicator Colour Red, Yellow, Green complete all as speicifed and directed. Make : Recommended by OEM

Supply of 10 mm LED Indicator Colour Red, Orange, Green complete all as speicifed and directected.