MODERNIZATION AND UPGRADATION OF JOINT COMMISSIONER INDUSTRIES OFFICE DISTRICT JHANSI UP

RENNOVATION WORK

Site Clearance

Clearing jungle including uprooting of rank vegitatio mtr above ground level &removal of rubbish upto a distance of 50 metre outside the periphery of area cleared

Dismantalling of old Existing plaster including disposal of refuse as directed by Engineer-in-charge within a distance of 60 meters SI No. 706

Dismantalling of C.C. flooring

Concrete with 4 cms guage stone ballast, coarse sand of 1.25 f.m. and cement in proportion of 8:4:1 in foundation and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of work.

Racking out joints of Brick Workin cement or lime mortor to a depth of 1 cm including disposal of refuse as directed by Engineer-in-charge within a distance of 60 meters SI No. 707

Scraping of old white or colour wash including disposal of refuse as directed by Engineer-in-charge within a distance of 60 meters SI No. 708

Dismantling and Removal of old Existing Electrification works

Dismantling and Removal of old Existing Plumbing works

12 mm thick cement plaster on wall in 1 : 4 cement & c. sand mortor on fair side of single or half brick wall for exterior plastering upto floor two level

Removing of doors leaf

Removing of door Frames

Supply and Fixing of Fully panneled of doors commercial quality ISI maked Ply Wood Flush Shutters

Supply and Fixing 25 mm thick pvc flush door shutteri Ply Wood Flush Shutters

Supply/fixing of anodised aluminium windows having 2mm thick aluminium section excluding coating and an average coating of 20 micron fully glazed made of aluminium window tube in vertical,bottom & horizontal member door chaukhat should be of aluminium tublar vertical with two openable shutter,the rate will including cost of material fixture 5mm glass,handles,locks,screw necessary bending etc as required for proper completion of the work, as per direction of engineer incharge.

Supply & fixing vitriffied glazed floor tiles of size 600x600mm in flooring or in skirting or dado laid with 1 :4 cement and approved coarse sand mortor finished with white cement slurry jointing & polishing complete including supply of all materials , labour Tools & Plants etc. required for proper completion of the work.

4.0 cm thick 1 :2 :4 plain cement concrete floor with cement approved coarse sand & 2cm graded approved stone grit , laid in pannels finished with 3 mm floating coat of neat cement specified over & without base concrete including supply of all materials , labour Tools & Plants etc. required for proper completion of the work. . SI No. 601-a

M-150 brick work in 1: 4 one cement and four coarse sand in superstructure including necessary cutting and moulding of brick for walls of one brick thick including supply of all material, labour and Tools & Plants etc. required for proper completion of work.

Providing/Applying white cement based wall putty on wall of average thickness 2 mm of approved brand and manufacture over the plastered surface to prepare the surface even and smooth complete .

Distempering with oil bound distemper of approved brand three coats and of required shade on undecorated surfaces to give an even shade and including throughly brooming surface to remove all dert and dust and other foreign material.

Finishing wall with two coat Premium acrylic smooth exterior paint with silicon additives of required shed on previous surface

Supply/fixing curtain rod of 1.25mm thick chromiumplated bras plate , with two cromium plated brass brackets fixed with C.P. brass screws and wooden plug 25 mm dia

Providing and laying APP Modified prefabricated five layer 3mm thick water proofing membrane, black finished reinforced with non woven polyster matt consisting fa coat of bitumen primer

Construction of Drain along Apron

Disposal of dismantled Malwa including loading and unloading Refused Material within distance of 8.00 Km from site .

Providing and fixing in position PVC Wall panelling and provision for providing switch boards fixtures etc , as per drawing complete as per direction given by engineer - in - charge . With on side laminated insted of plain board .

Providing and fixing of PVC strip BLINDS with rod …. Etc. complete

Providing and fixing PVC false ceiling at all height including providing and fixing of frame work made of special section, power pressed from MS sheet and galvanised with zinc coating as per IS-277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flange of 27mm and 37mm at 1200 center to center etc all complete.

Providing and fixing 12mm thk frameless toughened glass door shutter of approved brand and manufacturar, including providing and fixing of top & bottom pivot and spring type fixing arrangement and making necessary holes etc for fixing of required door fittings all complete as per direction of Engineer-in-charge (Door handle, lock & stopper etc to be paid seperately)

Prviding and fixing ISI marked nickle plated brass fancy Handle with necessary screw etc all complete.

Providing and fixing ISI marked bright finished brass floor door stopper with necessary screw etc all complete.

Providing and fixing bright finished brass night latch of approved quality including necessary screw etc all complete.

Providing and fixing aluminium die cast body tubular type universal door closer (IS-3564) with necessary acessories and screw etc complete. (DSR 9.83)

New Building

Earth work in foundation in ordinary soil excavation to be in form of regular pits not exceeding 0.50m in depth & earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including lift upto1.50M and lead upto 30m.The earth from cutting to be used in making embankment or to be deposited as spoil banks with in 30M distance as directed by engineer in charge.

Providing & laying in cement concrete with 8 : 4 : 1 of not less than strength of stone Ballast (40mm nominal size ), 4 Fine sand and 1 cement & curing complete,includingcost of form work in foundations and under floors. SI No. 281

Earth filling upto plinth level in surrounding area for Site development. AR Earth

Sand filling in plinth under floors including watering, ramming,consolidation and dressing complete including lead upto 50m. and lift upto1.5 m. including the cost of sand.

Providing and injecting chemical emulsion for pre-constructional antitermite treatment and creating a chemical barrier under and around the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the external perimeter of binding expansion joints, surrounding of pipes and conduit etc. complete (plinth area of the building at ground floor only shall be measured as per I.S. 6313 (Part II 1981) Aldrin emulsifiable concentrate or any other approved material such as Hepthachlor or chlordane will be used. Ch No -18, SI No-1

plinth prodection

R.C.C. work with cement , approved coarse sand and 20mm gauge stone grit in proportion of 1 : 1.5: 3 in excluding supply of reinforcement and its bending but including its fixing and binding the same with 24B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials , labour Tools & Plants etc. required for proper completion of the work but including the cost of binding wire .

LINTEL BAND

Same as above item but in R.C.C. slab in proportion of 1 : 1.5 : 3 and with 20mm stone grit.

M 150 Brick work in 1 : 6 cement and coarse sand mortor in foundation and plinth including supply of all materials , labour Tools & Plants etc. required for proper completion of the work. SI No. AR-III

2.5 cm thick Damp Proof Coarse with cement and approved coarse sand & 10mm stone grit in 1:1.5:3 and including water proofing material as ordered by engineer in charge in the proportion as specified by the manufacturer. SI No. 361

M-150 brick work in 1: 4 one cement and four coarse sand in superstructure including necessary cutting and moulding of brick for walls of one brick thick including supply of all material, labour and Tools & Plants etc. required for proper completion of work.

M.S. (tor steel or plain ) in plain work such as R.C.C.or R.B. workincluding for proper shape and including supply of steel & its wastage bend , hooks and authorised overlaping shall be measured and including cost of binding wire.SI NO. 504

Providing & Laying "brick bat coba" 100 mm thick laid with M-150| class brick bat coba 7.50 cm thick with gap of 15 mm to each| other, over 20 mm thick base of cement mortar 1:4 cement and Coarse sand mixed with water proofing compound spreading cementslurrymixedwithaereliccementconcretewaterproofingcompoundfilledgapsofcoba&toofcobamortamixedwithwaterproofingcompoundin1:4cementandcoarsesandmortarfinishedsmooth & top mashed false square 30 cm X 30 cmandsidewallparapetshallbemonotythicplasterwallupto30cmhigherandjunctionandcornershallberoundedbybrickballast|cementandcoarsesandandmasonrycobawithtopfinishing|plaster mixing withacetic water proofing compound @2%byweight&IncludingsupplyofallmaterialslabourT&Petc.requiredforpropercompletionofworks.Ch.no11,S.I.No. New item 1

12 mm thick cement plaster on wall in 1 : 4 cement & c. sand mortor on fair side of single or half brick wall for exterior plastering upto floor two level

12 mm thick cement plaster on wall in 1 : 4 cement & c. sand mortor on fair side of single or half brick wall for exterior plastering upto floor two level (Outer Plaster)

Providing & Laying of 8 to 10 mm thick ivory or light shade Vitrified tiles of 600 mm X 600 mm size in flooring or skirting laid with 1:3 cement mortar (1) cement: 3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T& P required for proper completion of work CH -14 New Item-2

Supply and Fixing of Ceramic white / Coloured glazed tiles in WALL complete item . DSR-8.31

Providing and fixing 25mm thick PVC flush door shutter made out of one piece multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm etc all omplete. (DSR 9-118-3)

Providing and fixing 12mm thk frameless toughened glass door shutter of approved brand and manufacturar, including providing and fixing of top & bottom pivot and spring type fixing arrangement and making necessary holes etc for fixing of required door fittings all complete as per direction of Engineer-in-charge (Door handle, lock & stopper etc to be paid seperately)

Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).

Providing and fixing of PVC strip BLINDS with rod …. Etc. complete

Supply/fixing curtain rod of 1.25mm thick chromiumplated bras plate , with two cromium plated brass brackets fixed with C.P. brass screws and wooden plug 25 mm dia

Providing and fixing PVC false ceiling at all height including providing and fixing of frame work made of special section, power pressed from MS sheet and galvanised with zinc coating as per IS-277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flange of 27mm and 37mm at 1200 center to center etc all complete.

Providing/Applying white cement based wall putty on wall of average thickness 2mm of approved brand and manufacture over the plastered surface to prepare the surface even and smooth complete .

Distempering with oil bound distemper of approved brand three coats and of required shade on undecorated surfaces to give an even shade and including throughly brooming surface to remove all dert and dust and other foreign material.

Finishing wall with two coat Premium acrylic smooth exterior paint with silicon additives of required shade

Providing & fixing ISI marked oxidised M.S. Sliding door Bolts with nuts and screws etc. complete 250 x 16 mm

Providing & fixing ISI marked oxidised M.S. with nuts and screws etc. complete Tower Bolt 250 x 16 mm

Providing & fixing ISI marked oxidised M.S. with nuts and screws etc. complete , Handle 125 mm

Construction of drain along with Apron

Provinding and laying of 80 mm Interlocking concrete block pavement laid in stone dust base and fill joint with finr sand .joint filled after labing and dressing base including supply of all materials labour T & P etc. Required for proper completion of the work.

Septic Tank

Earth work in foundation in ordinary soil SI No-251

Providing & laying in cement concrete with 8 : 4 : 1 stone Ballast , coarse sand and cement . SI No. 281

M 150 Brick work in 1 :6 cement and coarse sand mortor in foundation and plinth

R.C.C. work with cement , approved coarse sand and 20mm gauge stone grit in proportion of 1 :1.5 : 3 .

M.S. (tor steel or plain ) in plain work such as R.C.C. work

20 mm cement plaster in 1 : 2 cement & coarse sand with neat finish . SI No. 597

4.0 cm thick 1 :2 :4 plain cement concrete floor with cement approved coarse sand & 2cm graded approved stone grit , laid in pannels finished with 3 mm floating coat of neat cement specified over & without base concrete including supply of all materials , labour Tools & Plants etc. required for proper completion of the work. .

Providing M.S. foot rest of 20 x 20 x 10 cm size of 20mm square bar DSR 19.15.1

Providing & Fixing soil waste and vent pipe 75mm dia sand cast iron S&S pipe .

Providing & Fixing sand cast iron terminal guard 75mm dia .

Providing & Fixing C.I. Tee at the inlet & outlet of Septic Tank

Providing & Fixing plane sand cast iron S&S bend of required degree 75 mm

Providing lead chauked joints sand cast iron centrigugally cast ( spun ) irons pipes & fitting of dia 75 mm

Supply & fixing of medium quality R.C.C. Manhole cover with frame complete . HD-20-Circular shape 560 mm dia

Supply & fixing of medium quality R.C.C. Manhole cover with frame complete . MD-10-Sqaure shape 450 mm dia

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter . 1.8 m long complete as per standard design with common burnt clay F.P.S. ( non modular )bricks of class designation 7.5

Excavation in trench in all kind of soil for pipes exceeding 80 mm dia But not exceeding 300 mm ( AS per DSR Item No. 2.10.1.2 )

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100 mm diameter

Providing , fixing , jointing and testing in position of ISI marked UV stablized UPVC pipes for soil ,waste and vent , Type B asper IS : 13592 suitable for rubbering joints for vertical pipes and salvent cement joints for horizontal pipes ........................... Complete 100 mm dia

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mmnominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 455 x 610 mm ...... for sewer line

SANITARY FIXTURES & ACCESSORIES

Providing & fixing one piece construction white vitreous china European Type W.C. pan with 100 mm sand cast P or S trap ,an integaral longitudinal flushing pipe,/PVC. flush pipe cutting and making good the wall and floors wherever required.

providing & fixing of wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass single hole mixturewaste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required (550x400mm).

Supply & fixing of beveled edge Mirror of superior glass of approved make and Rectangular shape with 6 mm thick hard board backing. 600 x 450 mm ….. Complete ( AS per DSR Item No. 17.31 )

Providing & fixing CP Brass 32 mm size Bottle Trap .. Complete ( AS per DSR Item No. 17.22 A )

Providing & fixing CP Brass Single leave telephonic wall mixture….. .. Complete ( AS per DSR Item No. 17.22 B )

Providing & fixing 600x120x5 mm glass self….. .. Complete ( AS per DSR Item No. 17.33 )

Supply & fixing of 15mm dia C.P. Brass Stop Cock heavy quality (Gem / eqv . ) ….. .. Complete ( AS per DSR Item No. 18.16.2 )

flat black or angular front lipper urinal basin of white glazed earthen ware 465x355x265 mm

SOIL WASTE & VENT PIPES AND FITTINGS

Providing & fixing 32MM size B class I.S.I. marked G.I. pipe complete with G.I. specials such as bend, tee, socket, cross , clamp etc. ….. .. Complete ( AS per DSR Item No. 18.10.4 )

Providing & fixing ON WALL FACE Unplastified RigidPVC rain water pipe 110 mm diameter. ….. .. Complete ( AS per DSR Item No. 12.41.2 )

Making Khurra 45x45 cm ….. .. Complete ( AS per DSR Item No. 12.22

Providing & fixing Unplastified RigidPVC pipe Clips for 110 mm diameter. ….. .. Complete ( AS per DSR Item No. 12.43.2 )

Providing & fixing the inlet mouth of rain water pipe cast iron grating 15 cm diameter. ….. .. Complete ( AS per DSR Item No. 12.44 )

WATER SUPPLY PIPES AND FITTINGS

Providing & fixing Chlorinated Polyvinyl Chloride ( CPVC ) pipe Exposed on wall 25mm dia nominal outer dia ….. .. Complete ( AS per DSR Item No. 18.7.3 )

Providing & fixing Chlorinated Polyvinyl Chloride ( CPVC ) pipe Concealed on wall 15 mm dia nominal outer dia ….. .. Complete ( AS per DSR Item No. 18.8.1 )

Providing & fixing Chlorinated Polyvinyl Chloride ( CPVC ) pipe Concealed on wall 20 mm dia nominal outer dia ….. .. Complete ( AS per DSR Item No. 18.8.2 )

Providing & fixing 45 cm long Unplastified PVC Connection pipe with brass union 15 mm nominal bore. ….. .. Complete ( AS per DSR Item No. 18.21.2.1 )

Providing & fixing CP brass bib cock 15 mm nominal bore

Providing & fixing CP brass Long body bib cock 15 mm nominal Bore

Providing & fixing CP brass Angle valve for basin mixture and gyser points of 15 mm nominal Bore

Supply & fixing of 25mm dia gun metal gate valve with C.I. wheel of approved quality.

Supply & fixing of 25mm dia Ball valve of approved quality.

Providing & Placing on terrace wter storage tank ( AS per DSR Item No. 18.48 )

SCHEDULE OF QUANTITIES FOR INTERNAL SEWERAGE SYSTEM

E/W & P.C.c. 1:2:4 for covering of 110 mm PVC pipe

Providing, laying and jointing U-PVC PIPE Type- B including testing of joints etc. complete 110 mm diameter

Providing and fixing square-mouth S.W . gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P Type

providing & fixing of UPVC floor Trap of self cleaning Design with C.P. jali complete

providing & fixing on wall face unplasticised -PVC moulded fitting accessaries for unplasticised Rigid PVC pipes including joints with seal ring leaving 10mm gap for thermal expansion ,( Make Supreme / Finolex / Prince)

Reducing Door Tee 110x110x75

Door Tee

Bend 110 mm

DOOR BEND ( T.S. ) 110 mm

SANITARY FIXTURE & ACCESSORIES

Providing & fixing C.P. BRASS Two-way angle valve for EWC points & for fixing Ablution health faucet of approved quality confirming to IS : 8931 , 15 mm nominal bore -ESSCO SQT 526 AKN

Providing & fixing 75X2 CM C.P. BRASS TOWEL RAIL complete with C.P. Brass brackets fixed to wooden cleats with C.P. brass screw -ESSCOAEC-1181

Providing & fixing C.P. BRASS SOAP TRAY FIXED to the wall with PVC rubber plug complete with C.P. brass screw -ESSCOAEC-1131

Providing & fixing 15 mm dia inlet C.P. BRASS single flow overhead shower with arm -ESSCO EOS-542A - 125 MM DIA

2.00 H.P. Pupm

Transportation of Rig Machine &equp. And Stock

Drilling of 275 mm dia bore in over bore by D.c. ?DTH Rigd

Drilling of 175 mm dia bore in all Tip. ?DTH Rigd 91 to 100 mm

Provision for per submersible pump unsuccesful bore 35 %

Cost of Successful bore

Lowing anf fixing of 200 mm ms plain pipe

Supply of 200 mm ms ERW ms pipe

Supply of 200 mm ms well cap

Supply of 200 mm ms ring

Supply of 32 mm upvcpipes

Supply of 200 mm ms well cap

Development of bore 250 PSI Air Compressor thr Rate

Supply of Gravel

Water arragment for bore

Supply of 2 h. p sumbersible pump

Supply of 4 mm cable

Fixing of pipe .,Gate ,Valve ….etc

Installation of submersible pump over the bore holes as per instruction of the …

Emergency / other work

Supply of 32 mm upvc pipe for fitting

s/f of 1000 ltr water storage tank

Providing all material laboure T&P ect. 60x60x75 cm

Excavation in foundation in ordinary soil (loan clay or sand )

Concrete with 4.0cm gauge STONE Ballast, Fine sand of 1.25 F. M. and cement in proportion of 8 : 4 : 1 in foundations and under floors

M 150 Brick work in 1 :4 cement and fine sand mortor in Foudation & Plinth

20 mm cement plaster in 1 : 2 cement & coarse sand with neat finish .

Construction of R.C.C. Slab with cement , approved coarse sand and 20mm gauge stone grit in proportion of 1 :1.5 :3 in

M.S. (tor steel or plain ) in plain work such as R.C.C.or R.B. Work

Supply of M.S. or iron work of small size & section such as M.S. gates wrought to required form including supply of all materials , labour Tools & Plants etc. required for proper completion of the work. )

Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :

With common burnt clay F .P .S.(non modular) bricks of class designation 7.5

4.0 cm thick 1 :2 :4 plain cement concrete floor with cement approved coarse sand & 2cm graded approved stone grit , laid in pannels finished with 3 mm floating coat of neat cement specified over & without base concrete including supply of all materials , labour Tools & Plants etc. required for proper completion of the work. .

Providing & fixing of 110 mm dia P.V.C. Pipe Type -B

Excavation in trench in all kind of soil for pipes exceeding 80 mm dia But not exceeding 300 mm ( AS per DSR Item No. 2.10.1.2 )

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100 mm diameter

Boring with 150 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested :

150 mm dia

Providing & laying Stone grit 40 mm size

Providing & laying Stone grit 20 mm size

Providing & laying Pea gravel 5-10mm size

Providing & laying Coarse Sand

Nylon mesh for filter

Interlocking Road

Earth work in filling by cartage of earth from 3.00km by tractor tralley including ramming dressing and watering complete

Laying of stone dust in foundation including cos tof material….

M-150 brickwork in 1:3 cement and coarse sand mortor including cost of material , labour, T&P complete

PIL & compacting of 53-22.4mm granite stone ballast with screening material 0.19 Cum/Sq.m (6.7mm-70%, stone dust 30%7.50 cm compacted thickness in top coat by 3wheel 80-100 KN static roller thand rammer including hire charnes and fuel charne

Provinding and laying of 80 mm Interlocking concrete block pavement laid in stone dust base and fill joint with finr sand .joint filled after labing and dressing base including supply of all materials labour T & P etc. Required for proper completion of the work.

12mm. Thick plaster work in 1:4 brick work minimum thickness not less then 10mm. With cement and Fine sand of 1.25 F.m. Mortor.

Less 5% of Department

Please Enable Macros to View BoQ information