Shifting of 02 x Cemented Pole, three phase connection at URO and 10 Security light in MT garage of TK TPTR PL Asc and Spl repair of Submersible Pump set and other connected items against BER under GE (East) Ferozepur Cantt

Supply and fix Prestressed concrete poles of 9 meter long having 102mm x 152mm at top and 102mm x 289mm at bottom, class 10, including foundation and coping, complete all as specified and directed.

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed.

Supply & fixing street light pole cable junction box IP-65 with box size of 200x160x98 with 4 Nos of terminal block, 1 Nos of earth terminal metnic knockouts for cable entry and the box made out of thermal plastic material suitable for 16/25 UG sqmm cable including clamps bolts, nuts duly painted and MCB SP 6 Amp etc. complete all as specified & directed.

Supply & fixing 3 core 1.5 sqmm PVC insulated and FR PVC round sheathed copper conductor flexible 1100 volts for connection from Junction Box to street light fittings including clamps for FR PVC wire as specified & directed by Engr-in-Charge.

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 4 core 16 sqmm including taking out old u/s cable complete all as specified and directed.

Supply and fixing GI pipe light grade 40mm dia upto 1.5 Mtr from surface to junction box with all fittings for cable protection all as specified and directed by Engr-in-charge.

Supply and fixing GI pipe bracket for street light fittings made out of 40 mm dia GI pipe medium grade 1.2 mtr long bent to required angle/shape with and 2 x pair of MS clamps made out 40mmx5mm MS flat iron bolts,nuts complete including two coat of synthetic enamel paint (first grade) over a coat of red oxide complete all as specified and directed by Engr-in-charge

M&L Painting of LT PCC pole upto 1.5 mtr height from PCC, of synthetic enamel paint with black and white strips and including wiriting pole No all as specified and directed by Engr-in-Charge.

Material & labour for boring hole under the road/payment/ hard standing upto 150 mm Bore Pipe not less than one metre below ground level complete all as specified and directed.

Supply, installation, testing and commissioning in replacement of CPRI approved, factory made, LT panel board cubical, Outdoor type, floor mounted single door, Front & Rear openable with locking arrangement, suitable for AC, 3 phase, 4 wire, 50 cycles, 415 Volts. The panel board shall be made of 3.15 thick CRCA / Powder coated with of suitable size. The panel have to provide proper compartment as per IS specification and wiring of panel with suitable size of copper conductor FRLS cable of suitable size with thimbles,Base frame of the panel shall be made of angle iron of size 50 x50 x 6mm of upto 1/2 mtr hight from GL& 1/2 mtr for Below GL in PCC (1:3:6) type C-2 using 40 mm stone aggregates comprising of following:- (i) Panel having common aluminium bus bar of capacity 200 Amp TPN each and suitable capacity TPN bus bar for outgoing MCCB's,including aluminium lugs to connect the cable and cable gland for Each cable entry as per cable size. (ii) Incoming:- (a) MCCB 4 Pole, 230 V, 63 Amps, Adjustable type with breaking capacity 16 KA - 02 Nos (b) Indicator lamp RYB :01 Nos Set.