Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹37.8 L+₹1.3 L (3.67%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹38.4 L+₹1.9 L (5.33%)Rejected-Finance H NO 12 ADRASH SAINIK ENCLAVE HISAR CANTT HARYANA | HISAR | HISAR | HARYANA | 125006 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹41.3 L+₹4.8 L (13.3%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹45.5 L+₹9.0 L (24.8%)Rejected-Finance H NO 920 SEC 16 17 HISAR HARYANA 125005 | HISAR | HISAR | HARYANA | 125005 | L5 | Rejected-Finance Being L5 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
6 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (W) HISAR
GE (W) HISAR HISAR MIL STN HISAR 125006
GE(W)/HSR-38/2022-23 COMPREHENSIVE REPAIR OF ANIMAL LINES IN EBS AT HISAR MIL STN UNDER GE (W) HISAR
2022_MES_550522_1
GE(W)/HSR-38/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (W) HISAR
As per tender documents
8 documents required · 8 mandatory
₹500
GE (W) HISAR
₹98,000
Yes
23 Dec 2022
7 Sept 2022
8 Oct 2022
7 Sept 2022
6 Oct 2022
22 Sept 2022
Amount
Demolition of cement concrete as in ground floors and pavings not exceeding 15 cm thick below or above ground level (unreinforced) complete all as specified and directed.
M&L 100mm thick cement concrete type B-2 , 1:2:4 ( 40mm graded stone aggregate ) with finished the surface even and smooth W/o using extera cement and making 12 mm wide 10 mm deep grove while surface is green as pattern given complete all as specified and directed..
M&L for 75mm thick in cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protections including necessary form work complete all as specified and directed.
M& L for 25 mm thick flooring PCC 1:2:4 Type B-1 (using 20mm graded crushed stone aggregate ) as in floor finishes/ subbase of floor finishes. complete all as specified and directed.
Dismantling of Floor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish of the premises. complete all as specified and directed.
M&L Non -skid ceramic tiles 7 to 8 mm thick light shade (Square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over and including provision of cement screed bedding layer 10 mm thick in CM 1 : 4 etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
All as per item No 6.00 but over and including provision of screed bedding 10mm thick in CM 1 : 3 in vertical surface complete all as specified and directed.
M&L for glazed ceramic tiles in vertical surface 350x250x7mm /450x350x7mm thick and including provision of cement screed bedding layer 10mm thick Cm 1:4 etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
M & L for coloured chequered cement concrete tiles with grey cement and pigments 300 mm x 300mm x 25mm thick and including provision of cement screed bedding layer 10 mm thick in CM 1 : 4 etc set with neat grey cement slurry ,jointed and pointed in cement slurry and pigments in floor/ paths , complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons. Laid bedded and pointed in any mortar etc complete all as specified and directed.
M&L for 20 to 25mm thick machine cut Kota stone (550 x 550 mm) flooring over cement screed base laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified over and including 15mm thick screed bed in CM 1:3 complete all as specified and directed.
All as per item No 11.00 but kota stone slab (100/150mm x 550mm) and 20-25mm thick in riser of steps, skirting , dados and pillar laid over and including 10mm thick rendering to receive the stone in cement mortar 1:3 and jointed complete all as specified and directed.
M&L, 20mm thick granite stone slabs over and including 15 mm thick screed layer in CM 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of stone incl rubbing & polishing complete all as specified and directed.
Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar 1:4 as on brick/concrete walls finished the surface even and smooth w/o using extra cement complete all as specified and directed.
M&L for 10 mm thick rendering in cement mortar 1:6 as on brick / concrete walls complete all as specified and directed.
supply only Liquid water proofing compound complete all as specified and directed.
M&L for 10 mm thick rendering in cement 1:3 on fair faces of concrete surface with finished surface even and smooth in ceiling , chajjas etc. complete all as specified and directed.
M&L Rough cast plaster as specified .(Rendering coat not less than 10mm thick in C:M 1:3 , while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg size 6 to 12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even) on external wall. complete all as specified and directed.
Preparation of new plastered surfaces applying three coat of white wash on walls complete all as specified and directed.
Preparation of new plastered surfaces applying three coat of white wash on ceiling complete all as specified and directed.
M&L for two coat of cement base paint over newly plastered surface including preperation of newly untreated surface complete all as specified and directed.
Demolition of brick work built in cement mortar including all quoins, arches pillars etc complete all as specified and directed.
M&L for brick work with fly ash Bricks, (modular brick) straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.
M&L for Brickwork with fly ash bricks, (modular brick) straight or curved on plan to any radius i n half brick thick walls, built in old size bricks in cement mortar 1:4 complete all as specified and directed.
M&L for Bricks, sub class B,laid on edge in floors old size bricks bedded and jointed in cement mortar 1:6 and pointed in CM 1:3. complete all as specified and directed.
M&L for PCC 1:2:4 type B1 (20 mm graded aggregate) as in coping etc complete all as specified and directed.
Dismantling brick tiles or terracing tiles single layers as on roof complete all as specified and directed.
Demolition of mud of any thickness including plastering and leeping whether full thickness removed or only a part there of complete all as specified and directed.
M&L for cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate in padding, levelling courses and the like finish even & fair average 50mm thick or as required at site including Removal of old waterproofing treatment any type and preparation of RCC roof surfaces (old or new) with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particles. Filling the cracks by crack filler complete all as specified and directed.
Screed bed or bedding layer or mortar 15mm thick in cement mortar 1:6 with WPC on roof surfaces complete all as specified and directed.
Applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm after preparation the surface all asspecified.
M&L applied a coat of bituminious primer confirming to [email protected] Kg per Sqm ,APP BASED POLYMERIC Memberane not less than 3 mm thick. Weighing not less than 3 Kg/m2, reinforcd with polyster non woven febric(weighing not less than 15 Gm/Sqm) and upperside of memberane thermally insulated with white mineral gravel finish, uniformly embedded during manufacturing process shall be laid dry torch application, side coverlaps shall be 75 mm and end slab shall be 100 mm and all over laps and joints shall also be sealed by torch application including one coat of bituminous aluminium paint complete all as specified and directed.
Providing cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in roof kerbs complete all as specified and directed.
Taking down chowkats or frames with shutters wooden & steel w/o taking off suhutter from the frame area n exc 1.50 Sqm each ( Wooden shutters & MS angle frame ) all as specified.
Taking down chowkats or frames with shutters wooden & steel w/o taking off suhutter from the frame area exc 1.50 Sqm but n-exc 4 Sqm each ( Wooden shutters & MS angle frame ) complete all as specified and directed.
S&F for 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint complete all as specified and directed.
Taking down frame sutters exc 1.5 sqm but not exc 4.00 sqm each (without taking off shutters from the frames). complete all as specified and directed.
S & F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified and directed.
S & F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 all as specified.
M&L for PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhats. complete all as specified and directed.
Factory made Steel windows/ventilators (Box type), with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete all as specified and directed. Notes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Detail of box window shall be given on drawing no TD/2013/01 Sheet 1/3,2/3,3/3 (iii) Glass pane/ wire gauze shall be measured and paid separately.
Factory made Steel windows/ventilators (Box type), with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete all as specified and directed. Notes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Detail of box window shall be given on drawing no TD/2013/01 Sheet 1/3,2/3,3/3 (iii) Glass pane/ wire gauze shall be measured and paid separately.
M&L 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003. The shutter shall be fitted to chowkhats complete all as specified and directed.
S&F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete. The size of members of shutters shall be as specified in MES SSR Part-I. The shutter shall be fitted to chowkhats complete all as specified and directed.
M&L Mild steel bars as in window guard bars incl necessary welding and a shop coat of zinc primer , confirming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L, for two coats of synthetic enamel paint on steel Surfaces over , over 10cm in width or girth , not other wise described, including preparation of new surface. complete all as specified and directed.
M&L for galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples. complete all as specified and directed.
M&L for galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples, fixed in repairs. complete all as specified and directed.
M&L Butt hinges med weight cold rolled mild steel and fixed in repair 100mm size. complete all as specified and directed.
M&L 300mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed. complete all as specified and directed.
M&L Aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified and directed.
M&L aluminium handles cast type , anodised 150mm size. complete all as specified and directed.
S&F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate mild steel complete all as specified and directed.
S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate mild steel complete all as specified and directed.
M&L floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring fixed in floor 140mm size. complete all as specified and directed.
S&F 3mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sq.m in each pane complete all as specified and directed.
M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Demolition of Reincorced concrete in any position, RCC Chajja , manhole covers etc & disposal of rubbish off the premises complete all as specified and directed.
M&L precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) in cover slab and set in CM 1 : 6 including necessary form work complete all as specified and directed.
Demolition of Reincorced concrete in any position,Roofs ,beams, chajjas etc & disposal of rubbish off the premises. complete all as specified and directed.
M&L for RCC (nominal mix) 1:2:4 type B1 using 20 mm graded stone aggregate as in RCC Slabs chajjaa complete all as specified and directed.
M&Lfor rough finished Formwork to chullah hoods, chajjas,troughs and similar items including edges complete all as specified and directed.
S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
All as per item No 64.00 but in stirrups 6 to 8 mm dia complete all as specified and directed.
M & L fixed as in repairs, Machine pressed precast concret rubberised interlocking paver block (coloured) pre polished of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade and over and including 25mm average thickness sand cushioning benching to discontinuous edges of the Paving incl dismantling of old tiles complete all as specified and directed .
M&L Cement concrete type D2 1:4:8 (using 40 mm graded aggregate) as in foundations, filling and mass concrete, floor sub base etc. complete all as specified and directed .
Taking up or down steel water tubing and connection including cleaning for refixing or removal to store of 15mm bore complete all as specified and directed.
All as per item No 68.00 but of 20 borecomplete all as specified and directed.
M&L Refixing old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.) of 15 mm bore complete all as specified and directed.
All as per item No 70.00 but 20 mm bore complete all as specified and directed.
M&L for GI tubing 15mm bore fixed to walls, ceilings or laid in floors medium grade concealed complete all as specified and directed.
M&L for GI tubing 20mm bore fixed to walls, ceilings or laid in floors medium grade concealed complete all as specified and directed.
Taking down rain water pipes ( any size or pattren ) incl all fittings complete all as specified and directed.
S& F PVC Rain water pipes of dia 110 mm fixed to walls with stack clamps complete all as specified and directed.
S&F in repair 20mm dia ball valves high pressure of PTMT with epxy coated alluminium rod and high dencity plastic ball screwed for iron pipe and fixed complete all as specified and directed.
S& F in repair 20 MM Stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed.
S&F in repair of vetrious china wash hand basin white angle back of size 550X400 mm including cutting pinning in end of brackets or erecting stand but including 32mm dia PTMT waste coupling and waste pipe complete all as specified and directed. .
S&F 15mm dia PVC connection with brass nuts & PVC washers on both sides, 450mm long, fixing ‘in repair’ complete all as specified and directed.
S& F of PVC valve less syphonic type 10Ltr capacity flushing cistern with inlet , ball valve and handle including flush pipe of pvc 32mm dia, complete fixing only in repair complete all as specified and directed.
S&F in repairs Shower rose 100mm dia , brass chromium plated, with swivel type joint including fixing to steel pipes or union and fixed in repairs complete all as specified and directed.
S&F in repair Tubular mild steel chromium plated towel rail 20mm dia, D type 600mm long between flanges, fixing in repair complete all as specified and directed.
S&F bib taps cast copper alloy 15mm with crutch or butter fly handle screwed down screwed for iron pipe and fixed in repair complete all as specified and directed.
S& F in repair 15 mm dia stop valve cast copper alloy fancy type chromium plated with long shank and cup (concealed type) for iron pipe and fixed. complete all as specified and directed.
S&F in repair cast copper alloy CP angle cock 15mm bore fancy type, fixed complete all as specified and directed.
S&F in repair 15mm bore Pillar tap cast copper alloy with chromium plated fancy type screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
S&F in repair Grating doom 100mm dia of PTMT(Minimum weight 25gms) complete all as specified and directed.
Hacking out old broken glass of any thickness/size of any description from wooden frames/metal frame glazed with putty or fixed with beads complete all as specified and directed.
S&F 3mm thick, sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane, complete all as specified and directed.
S&F in repair 32mm dia waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm45gms/40mm-60 gms complete all as specified and directed.
S&F in repair 15mm bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms).complete all as specified and directed.
M&L for treatment of floor slab and walls of water over head tanks comprising of the following specifications complete all as specified and directed :- (i) Taking out existing plaster and Cleaning the surface by wire brush, chisel out any mortar sticking to the surface and brooming completely. (ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with and including integral water proofing compound Sika Plastocreat plus or equivalent make in Fosroc / Thermax as approved by GE @ 0.2% by wt of cement consumed including filling it with water to check dampness and seepage and where dampness / seepage is noticed, nozzles shall be fixed and grouting carried out. (iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty Sikagard 694 F (I) or equivalent make in Fosroc /Thermax as approve by GE. (iv) After drying putty, wash the slab and sides of tank with water and make it clear and clean. (v) Applying two coats of polymer modified cementious water proof coating with Sika Topseal 107 or equivalent make in Fosroc / Thermax as approved by GE in two coats @ 3kg/sqm to sandwiched with glass fibre reinforcement : Sika® Fab-1 or equivalent make in Forsro / Thermax as approved by GE over base coat as per manufacturs instruction to bottom and vertical sides up to finished floor level+wall height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the Tank (vi) Plaster the bottom and sides up to bottom of the wall with minimum 20mm thick CM 1:4 mixed with integral water proofing compound SIKA plastocreat Plus or equivalent make in Fosroc / Thermax as approve by GE @ 0.2% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout and making the surface smooth using extra cement.
SITA RAM AND SONS
virendra constructions
M/S RAJESH KUMAR & SONS
SHRI HARI BUILDERS
P.K. ENTERPRISES
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .