8504/B/E8 SPECIAL REPAIR/REPLACEMENT OF EXTERNAL WATER SUPPLY AND SHADOWLESS LIGHT FITTINGS AND OTHER SANCTIONED WORKS AT MORAR CANTT UNDER GWALIOR

Amount

M & L for Trial bore of 250 mm dia upto 200 meter depth below ground level in any kind of soil strata including hard stone/boulder etc . (Note :- Rate deemed to be included for following :- (a) Transportation of DTH machine for drilling of the bore well to the site of bore well and removal of the DTH machine with all T&P and boring accessories after completion of bore well including site clearance complete all as specified and as directed by Engineer-in-charge. (b) M&L for resistivity survey for the location/point for drilling of borewell at site by the authorised representative from CGWB to ascertain the expected availability of water and submit the report with the following recommendations : - (i) Location of proposed bore well duly marked on drawing. (ii) Depth of proposed bore well to be drilled. (iii) Expected yield of proposed bore well. (iv) Position of plain/slotted MS casing pipe to be incorporated in the bore wellduly marked on drawing. (v) Expected strata to be encountered during drilling of proposed bore well or any other data/information if considered necessary. (c) A certificate from the contractor has to be submitted by ensuring that the process of the work has been carried out as per the guidelines of CGWB before processing of payment.

Supplying lowering and fixing into bore holes MS (ERW) plain pipe 200mm dia both ends plain having thickness 6 mm thick as per IS-4270/3589 including welding of socket at site on both ends complete all as specified and as directed by Engineer-in-charge. Make - TATA/Swastik/Jindal

Supplying, lowering and fixing into bore holes MS (ERW) pipe 200mm dia duly perforated with 2mmx50mm longitudinal holes having 6mm thickness as per IS-4270/3589 with and including welding of sockets at site on both ends complete all as specified and directed by Engineer-in-charge.Make - TATA/Swastik/Jindal

Supply and packing aggregate of size 3 to 5 mm round size arround the casing pipe to the entire depth of bore hole up to ground level complete all as specified and directed by Engineer-in-charge

M&L Development of bore well by means of DTH machine followed by high capacity compressor to its optimum yield till clear water of potable quality free from sand / silt is obtained including draw down performance and yiled test of the tube well complete all as specified and as directed by Engineer-in-charge.

M&L for chemical / bacteriological analysis and potability test of water obtained from bore well from govt approved water testing lab and submitting the test report in duplicate complete all as specified and as directed by Engineer-in-charge

M&L for yield test of bore well by contineously pumping for 16 hours spell to determine safe pumping yield complete all as specified and as directed by Engineer-in-charge. (Note : - Pumping set equiped for testing yield shall be used and pump motor submersible cable column pipe and other accessories will be arranged by the contractor at no extra cost.)

Supply and lowering GI column pipe heavy duty 80 mm dia 3 mtr in length both side MS flanged (12mm thick) duly welded including nuts, bolts, washers and rubber flange of suitable size complete all as specified and as directed by Engineer-in-charge. Make - TATA/SWASTIK/JINDAL

Supply install testing and commissioning of 3 phase submersible pump set of capacity 17.5 HP 415 volts AC 50 HZ having discharge upto 240 LPM 118 mtr head suitable for 200 mm dia casing pipe of the bore well Make- Kirloskar or equivalent in Crompton Greaves or KSB

Supply and fix flat submersible cable 3 core of size 10 Sqmm m, with multi stranded copper conductor complete all as specified and as directed by Engineer-in-charge Make-Finolex / Plaza/Havells

Supply and fixing of CI Non Return Valve sluice valve 150 mm dia Class PN 1.6 ISI marked complete all as directed. Make - Kirloskar/Leader or equivalent

Supply and fixing of CI Non Return Valve sluice valve 80 mm dia Class PN 1.6 ISI marked complete all as directed. Make - Kirloskar/Leader or equivalent

S&F MS well cap suitable for 200 mm dia MS casing pipe complete all as directed by Engr - in Charge.

Supply and fix MS bail plug 200mm dia fixed and welded complete all as specified and directed

S&F MS well clamp suitable for 200mm dia MS casing pipe with 4 Nos 18mm dia bolts nuts washers clamp fabricated from MS flat iron 100mmx100mmx16mm thick duly drilled holes of suitable size including painting with two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and as directed

-do- all as per item No 15 here-in-before but suitable for 80 mm dia GI column pipe and flat iron size 50mm x 50 mm x 10mm thick complete all as directed

Excavation in trenches n.exe 1.5 mtr wide and n.exe 1.5 mtr in depth for laying of GI pipe and PVC cable etc n.exc 10 sqm on plain and n.exc 1.5m in depth getting out in soft/loose complete all as directed

Returning filling in including spreading levelling watering and well ramming in layers not exe 25 cm in soft /loose soil complete

Removing excavated materials n.exc 50 m and deposited where directed at a level n.exc 1.5m above the starting point in soft/loose soil complete

Taking up cast iron water main (including all fittings) with socket and spigot ends and lead joints including burning out joints and recovering lead for pipe of bore 300 mm complete all as specified and directed.

-do- all as per item above but of CI pipe of size 200 mm

-do- all as per item above but of CI pipe of size 150 mm

-do- all as per item above but of CI pipe of size 100 mm

-do- all as per item above but of GI pipe of size 80 mm

-do- all as per item above but of GI pipe of size 50 mm

-do- all as per item above but of GI pipe of size 40 mm

-do- all as per item above but of GI pipe of size 25 mm

-do- all as per item above but of GI pipe of size 20 mm

Supply, lay and jointing centrifugally cast (spun) ductile iron pressure pipe with socket and spigot ends class 'K-7', ISI marked, confirming to IS:8329/2000 (latest revision) suitable and including rubber gasket joint (push on) with inside cement morter lining of size 300 mm bore (Make :- Electrosteel, TATA, Jindal)

-do- all as per item above but of pipe of size 200 mm (Make :- Electrosteel, TATA, Jindal)

-do- all as per item above but of pipe of size 150 mm (Make :- Electrosteel, TATA, Jindal)

-do- all as per item above but of pipe of size 100 mm (Make :- Electrosteel, TATA, Jindal)

Supply & laying in trenches, jointing 80 mm bore GI tubing medium grade including all fittings such as bends elbows tees union short pieces connectors check nuts caps plugs etc complete all as specified and directed (Make :- TATA, Swastik, Jindal)

--ditto-- all as per item above but for GI pipe of bore 50 mm (Make :- TATA, Swastik, Jindal)

--ditto-- all as per item above but for GI pipe of bore 40 mm (Make :- TATA, Swastik, Jindal)

--ditto-- all as per item above but for GI pipe of bore 25 mm (Make :- TATA, Swastik, Jindal)

--ditto-- all as per item above but for GI pipe of bore 20 mm (Make :- TATA, Swastik, Jindal)

Supply and lay in replacement CI/DI fittings such as bends ( any type, radius and angle) taper any type, ( straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, cross (all sockets or socket and spigot) coller , caps and plugs, etc. upto 400 mm bore CI/DI pipes

Supply and fix in repairs gun metal globe or gate valve of size Ø 80 mm with iron wheel head , screwed both ends for connecting to pipeline all as specified and directed. (Make- Leader, Sant, Zoloto)

--ditto-- all as per item above but of size 50 mm (Make- Leader, Sant, Zoloto)

--ditto-- all as per item above but of size 25 mm (Make- Leader, Sant, Zoloto)

--ditto-- all as per item above but of size 20 mm (Make- Leader, Sant, Zoloto)

Supply and fixing in replacement of Butterfly valve with gun metal spindle, of size 200mm bore including suitable size nuts, bolts, washer and rubber gasket all as required and directed incl taking down old existing unsv sluice valve/Butterfly valve at site all as specified and directed by Engr-in-Charge. (Make - BIR, SIR, ZOLOTO)

-do- all as per item above but Butterfly Valve of size 150 mm (Make - BIR, SIR, ZOLOTO)

-do- all as per item above but Butterfly Valve of size 100 mm (Make - BIR, SIR, ZOLOTO)

-do- all as per item above but Butterfly Valve of size 80 mm (Make - BIR, SIR, ZOLOTO)

M&L for construction of valve pit chamber in PCC block built in cement mortar(1:6) with MS sheet cover in CM 1:4 with MS sheet cover 3.15mm thick and angle iron 50x50x6mm with locking arrangement including excavation and earth work in any type of soil, , PCC (1:4:8) type D2 for foundation, PCC(1:2:4) typeB1 for bed/coping, plastering 15mm thick in CM 1:4 painting all steel surfaces with two coats of bituminous black paint over a coat of anti corrosive red-oxide primer complete all as specified and directed and as shown on drawings of size 1200 x750x1000mm

-do- all as per item above but of size 1050 x 750 x 1000 mm

Supply, install, testing and commissioning of manufacturer's factory assembled and tested electric driven centrifugal pump set of capable of delivering 30 LPS at 32 Meter head comprising of horizontal spit casing pump CI body 200 x 150 mm Suction and delivering with bronze impellers , stainless steel shaft, operating at 1440/1450 RPM, 3 phase 415 V, 50Hz complete and mounted on common MS base frame and foundations of the pump set including PCC foundation, MS bolts with nuts , and anti vibration pads ,Pressure gauge diaphragm type up to 50 Kg/Cm2-1 No. Priming arrangement of pump set by providing GI pipe 20 mm dia medium grade , gate valve etc from nearby existing line (Not more than 10 meters away) with all fittings with and including rubber packing of 6 mm thick and also including 16 Sqmm 3 core copper conductor in heavy duty medium grade PVC conduit not less than 32 mm complete all as required complete-1 job complete all as specified and directed by Engr-in- Charge (MAke - Kirloskar, Crompton, KSB)

Supply and laying of XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 50 Sqmm 3.5 core complete all as directed. Make - Havells/Plaza or equivalent.

M & L High density polyethylene pipes (HDPE) 50mm dia of pressure rating 6 kgf/cm2 laid in trenches complete all as specified and directed. Make :- Tata, Swastic, Jindal.

M&L Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3mm thick burried directly in ground earth pit not less than 2.25 meter deep below ground level with top edge of the plate not less than 1025 meter below normal ground level , connected to galvanises earth lead wire 4.0 mm diaby means of bolts,nuts,check nuts and washer of galvanised iron or steel all as shown in Electrical plate No.3 connected to earthing test point all as specified or indicated including testing on completion complete all as directed by Engr-in-Charge.

M & L for Surface excavation n.exc 15cm deep and getting out complete including cutting/vegetation of grass/small trees, site clearance and disposal of excavated/cleaned mtrls 50 m away from site complete all as directed.

M & L for PCC in cement concrete in foundation type D2 1 : 4 : 8 in 40 mm graded aggregate of 10 cm thick all as specified and directed.

M & L for PCC in cement concrete in foundation type B2 1 : 2 : 4 in 40 mm graded aggregate of 5 cm thick all as specified and directed.

M & L for Glass dividing strips, 3 mm thick inserted in position, confirm to design all as specified and directed.

M & L for sub main wiring with two run of FRLS copper stranded conductor of 4 Sqmm with one run of 2.5 Sqmm incl med grade PVC concealed conduit pipe of 20 mm dia complete all as specified and directed (Note :- Two run of 4 Sqmm an one run of 2.5 Sqmm copper stranded conductor will be measured as one run)

M & L for sheet metal enclosure for DBs when MCBs to be used of DB 4 way SPN with 200 Amp bus bar wsith neutral link complete all as specified and directed

M & L for MCB 16 Amp SPN 'B' Series 240 volt complete all as specified and directed.

M & L for point wiring with 4 sqmm (Nominal Area)PVC insulated un sheathed multi stranded copper conductor with non metalic rigid PVC concealed conduit directed of suitable size with all fitings and accessories including factory made MS/ pressed steel terminal box with zinc coated duly concealed in wall including modular metal flush boxes reqd as per site reqmt for mounting switches, sockets fan regulators etc including continuous earth wire PVC insulated 2.5 Sq mm copper multistranded conductor connecting to common earth and earth dolly complete all as specified For one light point controlled by one switch

Supply and fixing ceiling rose surface bakelite 3 terminals 65x50mm complete all as specified

S & F modular white cover plate with frame of 01 module

S&F Modular switch 1 way 06 amp single pole

M & L for shadowless light fitting surgical halogen fittings with OT light having the following specifications :- (a) Intensity - 1,80,000 + 1,30,000 Lux + 10% (b) Size of light field 12-30 CM (c ) Colour Temprature - 4000 - 5000 K (d) Colour Reduction Index - 93 RA (e) LED life - > 50000 Hrs (f) Number of LED - 126 + 84 (g) Diameter of light - 600 mm x 2 (h) Brightness control - Capacitive touch panel (j) Power Supply - 220V/50HZ AC (k) Focusing - Adjustable (l) Battery Backup - Optional (Note :- Rate quoted seems to be included dismantling of existing false ciling, Re-fixing of False ceiling, cutting and re-arranging of existing false ceiling, Proving of MS plates, nuts, bolts etc to be grouted in RCC roof without damaging the structure etc and all other accessories required for fixing of OT light. No extra payment shall be made to contractor into this account) (Make :- Technomed TM or equivalent of any ISI approved make)

M/S ISLAM AND BROTHERS

M/s Tirupati construction