Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹13.3 L
EMD Value
₹26,648
Closing Date
27 Jan 2026, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Er. Vijay Kumar Executive Engineer
EE WSSD, Gurdaspur
AUGMENTATION OF WATER SUPPLY SCHEME KALA GORAYA and ATHWAL (MH PC) BLOCK KALANAUR, DISTT. GURDASPUR
2026_WSS_157754_1
Kala Goraya and Athwal/01/2026
Open Tender
Civil Works
Percentage
120 days
In Village Kala Goraya and Athwal
Please refer Tender documents.
2 documents required · 2 mandatory
₹100
₹26,648
23 Feb 2026
13 Jan 2026
28 Jan 2026
13 Jan 2026
27 Jan 2026
13 Jan 2026
Conglomerate floor 40mm thick cement concrete rate 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling
Dismantling cement Concrete plan 1:2:4, 50mm thick
Conglomerate floor 50mm thick cement concrete rate 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling
12.5mm thick cement plaster 1:4
Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint
Painting two or more coats excluding priming coat with synthetic enamel ready paint in all shades on wood work metallic or plastered,concrete surface to give an even shade Qty. as per item No. 4
White washing 3 coats inside of pump chamber.
Finishing wall with exterior decorative cement based paint such as snowcem robbiacem etc. two or more coats to give even shade. ”
Providing and fixing of Glass strips 4mm thick in floors
50mm wide
40mm wide
Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete. Inside pump Chamber.
Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade.
Supplying & fixing glass panes with glazing clip and special metal sash putty of approved make.
Dismantling cement conglomerate floors (25mm to 50mm) thick without concrete base
RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES:
Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
Wiring fan point without fan box
Wiring light point
Wiring 6 Amp. Plug control comprising wall socket point.
Wiring 16/20 amp. power plug control point.
Supply & erection of G.I. pipe (A-Class) as per IS:1239 (Part-I) 2004 including sockets, bends, inspection boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-
Earthing with 8 S.W.G. (4/mm dia.) G.I. wire in 15mm dia pipe with G.I. reducing socket 50mm x 15mm (upto 14 Metre in length)
Providing and fixing of ceiling fan of reputed make such as Crompton or equivalent
Providing and fixing of electric tube set of reputed make
MACHINERY
Providing & Installing Control Panel Board for 5.00 BHP Sub Set complete in all respects.
Construction of Plinth Protection of Existing OHSR of 25000 ltr capacity as per standard drawing and analysis as desired by engineer-in-charge complete in all respects.
uPVC RISING MAIN FOR BYEPASS
Providing, laying, Fixing, jointing, cutting & testing of uPVC Pipes & Specials (10 kg./cm2) ( ISI marked with the prior approval of EIC) along the trenches including cost of excavation complete in all respects as per ISI-4985 standard analysis.
110mm i/d (Mechanical)
Sluice Valve & Sluice Valve Chambers
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS1410) and Bronze(gunmetal) working parts sluice valves ISI marked 14846-2000 including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).
Size 0.9 m. x 0.9 m.
DEVELOPMENT OF WATER WORKS SITE.
Providing & fixing 1.2mtr high fencing around the head works site with 1.65 meter post, placed every 2.5 meters apart, embedded in cement concrete blocks and every tenth post to be strutted with three rows of triple layer G.I. Barbed wire weighing 14.00 Kg per 100 meters (minimum) and fixing with GI staples tied to 6mm bar nib, with binding wire or by providing cut, including drilling holes in the post, including cost of posts, winding wire, strutted earth work in the post & aluminum painting complete in all respects as per DWSS standard Drawing.
Providing and Fixing precast pre-stressed cement concrete fencing pole M-40 by 4 Nos. parallel high tensile entwined wire (ISI marked wire 4 mm dia fencing pole size at bottom 4" x 3", size top 3" x 3",Lenght 6ft, hooks 6 No. including cost of excavation, sand filling and erection complete in all respects.
Providing & fixing D-Hook complete with MS Bolts size 300mm x 18mm as per DWSS standard Drawing and analysis.
Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per DWSS standard Drawing & Analysis.
Construction of Foot Path with masonry toe wall & earth filling and Cement Concrete 1:8:16 with 40 mm gauge stone aggregate, 40 mm thick cement concrete topping 1:2:4, inside water works as per DWSS standard Drawing and analysis.
Providing & fixing MS sign Board as per DWSS standard design and analysis.
DISTRIBUTION SYSTEM
Providing, laying, Fixing, jointing of uPVC Pipes & Specials (6 kg./cm2) as per ISI-4985 (ISI Marked with the prior approval of EIC) along the trenches and laying the same in trenches to correct alignment and gradients, cutting, jointing & testing complete as per specifications.
Excavation with JCB
uPVC Pipe 110 mm o/d
Excavation with Manually
uPVC Pipe 63 mm o/d
uPVC Pipe 90 mm o/d
GI Pipe 50mm i/d
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS1410) and Bronze(gunmetal) working parts sluice valves ISI marked 14846-2000 including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).
(a) Size 0.6 m. x 0.6 m.
Dismantling and restoration brick paving complete in all respect as per DWSS standard approved analysis.
Contractor shall be quote rates only for dismantling of mettaled road & back filling with excavated earth fully compacted the restoration of the mettaled road to its original condition will be done by the concerned department i.e. PWD (B&R) PMB/Panchayati Raj)
Dismantling of Interlock tile road, Cement Concrete road with multiple layers, Brick Paving with multiple layers and restoration of Interlocking tile Road fully compacted with excavated material & sand filling complete in all respect as per DWSS standard approved analysis.
uPVC Pipe 90mm o/d
Making connection from existing PVC pipe line to new PVC pipe line including cost of bailing out water and al other materials compelte in all respect Up to 210mm
Providing proposed water connection to house hold up to wall with providing laying , jointing, testing MDPE pipe line 15mm o/d 2 mtr & GI 15mm i/d 2.50 mtr, including cost of specials such as tees, bends, sockets, elbow, G.I. Hooks making holes in wall etc, cutting threading and testing in trenches in the ground and cutting hole in wall ISI marked 15mm i/d GM ferrule as oer IS:2692 and 3'' i/d clamp with C.I. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete with excavation.
Water Connections on New/Exisitng Pipeline
Water Connections on GI Pipeline
Operation and Maintenance water supply system for 3 Months including operating of machinery , repair of leakages, supplying of full time Pump Operator cum- Chowkidar, supply of Sodium Hypo Chlorite solution for disinfection for 3 months after completion.
CARRIAGE OF MATERIAL
Extra Carriage of Fine Aggrigate payable upto lead 65 Km
Extra Carriage of Course Aggrigate (Bajri) payable upto lead 65 Km
Extra Carriage of Bricks payable (4.080x1000=4080)
ENVIRONMENTAL PROVISION
Surface dressing of ground including removing rank vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m in all kinds of soil.
Digging of pits in all kinds of soil & refilling the same, with the excavated earth mixed with well decayed farm yard manure @ 30% of pit volume and insecticide for termite control
Supplying and planting permanent trees in prepared pits and watering
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 4.50 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.28 MB
DNITkalaGoryaAthwal.pdf
Tender Documents • 2.26 MB
BOQ_319876.xls
BOQ • 0.40 MB
Tendernotice.pdf
Additional Documents • 0.52 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .