Construction of 13 Nos. Public Toilets including Civil, Plumbing, Sanitary, Electrical and Associated Works at Various Locations in District Meerut

The Price bid shall be read in conjunction with the Bidding Documents.

The quantities for various items provided in the Price Bid are estimated quantities and are given to provide a common basis for Bidding. During the execution of works, the same may vary based upon "Good for Construction" (GFC) drawings approved by the Engineer and as per the site conditions. The basis of the payment will be the actual quantities of the work executed and accepted by the Engineer or quantities as per the GFC drawings whichever is less and shall be paid /valued as per the accepted rates.

Bidder may please note that to perform this contract. nothing extra shall be payable on account of field constraints, non-availability of uninterrupted front, cost of project management, monitoring, coordination and supervision, cost of adhering to quality requirements (QA/QC), cost of adhering to SHE requirements, cost of preparing drawings and documents, as-built records and documentation, preparation of detailed scheme for taking necessary clearance and approval from the concerned authority and other local bodies etc.

Income Tax and any other statutory taxes to be deducted at source will be deducted by the Employer from the due payments of the contractor in accordance with the prevailing rules in force.

Bidder should not tamper the Price Bid. If the Price Bid is found to be modified by the bidder, then the same will be treated as incomplete and non-responsive and may result in the rejection of the Bid.

Method of Quoting the Price in the Price Bid The Price Bid is in Excel Format and the Quoting the Price in the Price Bid should be as Follows: (i) Whole Excel Worksheet is Locked except the Cells which are highlighted in Blue. (ii) Bidders are required to fill these cells which are highlighted in Blue only. (iii) Bidder is required to quote a flat percentage Excess/Less/At par on 'Total Amount of all the Schedules' in "BOQ1'' Sheet of Price Bid and further discount if any in BOQ2 of Price Bid along with methodolodgy of discount if any. (iv) All 'blanks' in the Pricing Document, where the Bidder is permitted to quote shall be filled in. (v) If some % is quoted inspite of marking 'At par' that % will not be considered and it will be taken as "At par" on basic amount. Failure to quote the % in case of excess or less for the "Total amount of Schedule shall be treated as "At Par" and shall be evaluated accordingly. (vi) Bidder is required to quote Rates in INR only.

Errors will be corrected by the Employer for any arithmetic errors in computation or summation as per contract conditions.

For Calculation of rates (excluding GST) of DSR 2023 items, following Methodology issued by CPWD vide Office Memorendum (OM) dated 08.08.2024 have been adopted: As per CPWD OM the rates of individual items of DSR 2023 has been multiply with correction factor on account of GST @ 0.973 to the existing rate of DSR 2023 item in order to achieve modified DSR rate and then reduced the corrected rate by 18% for making DSR item excluding GST. Note: The above Methodology shall be applicable for calculating the rate of Individual Items of DSR 2023 in Schedule A and items executed under Any DSR items in Schedule A (to be executed under Lump Sum amount). Based on the above Methodology and price quoted by the bidder payment shall be made for the individual items of DSR 2023 and items executed under Lump Sum amount of DSR 2023 in Schedule A.

BoQ_Ver4.0

SCHEDULE-B (SANITARY & WATER SUPPLY)

There are 6 Schedules in the Financial Bid as follows : (i) Schedule-A : (CIVIL WORK ) (ii) Schedule-B : (SANITARY & WATER SUPPLY) (iii) Schedule-C : (BOREWELL) (iv) Schedule-D: (SEPTIC TANK ) (v) Schedule-E: (Any Other miscellaneous DSR 2023 ) (vi) Schedule -F : ( ELECTRICAL ) The bidder is required to quote a flat percentage "Excess" (+) / "Less" (-) / "At par" with respect to the Total amount of all the Schedules in the "BoQ1" Sheet and further discount if any may be Quoted in the "BOQ2" Sheet along with methodology of discount if any. The percentage quoted by the Bidder in "BoQ1" sheet and discount (if any) quoted by the Bidder in the "BoQ2" will be applied on the individual rate mentioned under Column "6" of each schedule, for the purpose of payment to the Contractor.

SCHEDULE-A (CIVIL WORK )

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

TOTAL Amount for 13 No's Toilets (DSR +NS-ITEMS)-Exclu. GST

Total Amount of Schedules.(Excluding GST)

BoQ_Ver4.0

SCHEDULE-F ( ELECTRICAL )

Bid No. DM/MS/CPM-ME/290: Construction of 13 Nos. Public Toilets including Civil, Plumbing, Sanitary, Electrical & Associated Works at Various Locations in District Meerut.

SCHEDULE-E (Any Other miscellaneous DSR 2023 )

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Total amount of schedule

Letter of Price Bid

Bid No.:

National Capital Region Transport Corportation Limited

GatiShakti Bhawan,INA, New Delhi- 110023

We, the undersigned, declare that:

[amount in INR in figures]

DISCOUNT (IN %age )

Discount Amount

[Amount in INR in figures]

Name of the authorized representative of the bidder

Desiganation of the authorized representative

Name of the Bidder/ Bidding Firm / Company :

Date: (DD/MM/YYYY)

ESTIMATE

SCHEDULE-A (CIVIL WORK)

All works upto plinth level

Concrete of M25 grade with minimum cement content of 330 kg /cum

Concrete of M30 grade with minimum cement content of 350 kg /cum

Centering and shuttering including strutting, propping etc. and removal of form for

steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screwsshall be paid separately) make Alstone : 30 mm thick

Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 125x64x2.50 mm/125x75x2.5mm

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

TOTAL OF E

Steel Work

TOTAL OF E

TOTAL OF F

Flooring

TOTAL OF F

TOTAL OF G

Roofing

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 stone aggregate 10 mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design In 75x75 mm deep chase

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Shoe (Plain) 110 mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm

TOTAL OF G

TOTAL OF H

Finishing

12 mm cement plaster of mix : 1 :4 (1 cement: 6 coarse sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

TOTAL OF H

TOTAL OF I

Aluminum & UPVC Work

Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all comers, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineersin Charge.Wire mesh/Glazing of plain/ toughened/ laminated/ double glass unit with/without high performance coatings as per design requirements and conforming to 15: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for fil Sites with basis wind speed Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for:(i) Sites with basic wind speed> 45m /sec as per IS 875 Part 3 (ii) Sites with structure height more than 20m for all wind speeds make Fenesta/NCL Veka/Saintgobin.

Fixed window / ventilator with mullion / transom. Using R4 series with frame (64 mm & above ) x (50 mm & above) & mullion (64 mm & above) x (70 mm & above). (Height above 2.5 metre)

TOTAL OF I

TOTAL OF J

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be

TOTAL OF J

Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50 m x2.00 m made of 40x40x6 mm angle iron or 50x50x3 mm hollow MS tube posts/horizontal members/bracings covered with 1.63 mm thick MS sheet. The sheet shall be fixed with 30x5 mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5 m. MS channel ISLC 75 @ 5.70 kg/m, 50 cm long shall be provided at the bottom having oval shaped holes of size 50x25 mm at both ends with 50 cm long MS angle 40x40x6 mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250 mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously including shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge. (Note :- One time payment shall be made for providing barricading from start of work till completion of work including shifting. The barricading provided shall remain to be the property of the contractor on completion of the work).

TOTAL OF K

ESTIMATE

TOTAL of Borewell (Excl. GST@18%) for 1 Number Toilet

SUB-HEAD(ITEM WISE)

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post fl

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931

Providing and fixing toilet paper holder :C.P. brass

Providing and placing on terrace (at all floor levels) Polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement amd making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

C.P.V.C. PIPES

15 mm nominal dia Pipes

EXTERNAL DRAINAGE

Providing and fixing Unplasticized Polyvinyl Chloride (UPVC-110mm) pipes, soil, waste, and vent pipes including all UPVC plain fittings. This includes jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

Providing and fixing Unplasticized Polyvinyl Chloride (UPVC-75mm) pipes, soil, waste, and vent pipes including all UPVC plain fittings. This includes jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

ESTIMATE

TOTAL CIVIL WORK (A to K) Exclu. GST@18% for 1 Number Toilet

SCHEDULE-C (BOREWELL)

300 mm dia

METER

50 mm nominal dia Pipes

100 mm nominal size dia

Supplying installation testing and commissiong of submersibble pumpset 1HP- Single phase 10 Stage 50Hz .AC Supply complete as required. MAKE- KIRLOSKAR

ESTIMATE

Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm size P type With Sewer bricks conforming to IS : 4885

SCHEDULE-D (SEPTIC TANK )

All kinds of soil. 0.00-1.50m

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:

Suspended floors, roofs, landings, balconies and access

Finishing

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand)

Thermo-Mechanically Treated bars.

12 mm cement plaster of mix :

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

ESTIMATE

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Total Amount Exclu. GST@18% for 1 Number Septic Tank

Final Rate after GST dedu. @12%

Wiring for light point / fan point / call bell point with 1.5 sq. mm FR PVC insulated copper conductor single core cable in surface / recessed havey duty PVC conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FR PVC insulated copper conductor single core cable etc as required - Group C

2 X 1.5 sq.mm +1X 1.5 sq.mm earth wire

2 X 6.0 sq.mm +1X 6.0 sq.mm earth wire

4 X 4 sq.mm +2 X 4 sq.mm earth wire

4 X 6 sq.mm +2 X 6 sq.mm earth wire

4 X 16 sq.mm +2 X 16 sq.mm earth wire

Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate & for modular switches in recess etc as required.

3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. (For Power plugs)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, con

Providing and fixing 6 SWG dia G.l. wire on surface or in recess for loop earthing asrequired.

Supply and fixing of following GI strip on surface or in recess for conection etc. asrequired 25 x 5 mm GI strip

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required.

TOTAL Amount for 13 No's Toilets

NE-3.6 ( satya sai 2022) Dis.-2.49 %

NDRS-1 ( G&G-JVG-2020) Dis.-21%

NDSR-3 ( G&G-JVG-2020) Dis.-21%

NDSR-8 ( G&G-JVG-2020) Dis.-21%

NDRSR 17 & 22 ( G&G-JVG-2020) Dis.-21%

supply and laying of following sizes of PVC sheated LT XLPE armoured, aluminium/copper 1.1 KV grade, as required of the following sizes. 4x16 Sq. mm AL

NS-ITEMS