MAINT/REPAIR OF FLOORING, TILLING, FALSE CEILING, PLASTERE WORK IN OLD CAMP AREA AND TKD AREA AT GE BABINA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in colour cement to match as in floor including 15 thick cement mortar screed bed 1:4 complete all as specified and as directed

M&L non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm set and jointed in neat cement slurry and pointed in colour cement to match as in floor including 15 thick cement mortar screed bed 1:4 complete all as specified and as directed

M&L glazed ceramic colour tiles 300mmx600mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado including 10 mm thick rendering/screeding in cement mortar 1:3, complete all as specified and directed

M&L glazed ceramic colour tiles 300mmx200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado including 10 mm thick rendering/screeding in cement mortar 1:3, complete all as specified and directed

M & L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for Screed bed or bedding layer in cement mortar 15mm thick CM (1:6) for laying floor finishes complete all as specified and directed.

Taking down cement plaster on brick/concrete or stone walls etc incl racking out joints hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L Rendering 15 mm thick in CM (1:4) on concrete/brick surfaces on wall etc incl finishing the surface even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for rendering 15 mm thick CM (1:6) on concrete/brick surfaces of wall etc incl finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L for preparing of new surfaces and applying two coat of oil emulsion distemper on walls indluding 1mm thick putty complete all as specified and as directed.

M & L for complete removal of existing treatment from surface of wall and applying two coat of oil bound distemper including 1mm thick putty all as specified and as directed by the Engineer-in-Charge

M & L for applying two coat of cement base paint over a coat of alkali resistant priming paint on external surfaces of wall complete all as specified and as directed.

M & L for complete removal of existing treatment from surface of wall and applying two coat of cement base paint over a coat of alkali resistant priming paint on external surface including 1mm thick putty all as specified and as directed by the Engineer-in-Charge

Demolition of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L for brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete (on parapet wall) all as specified and as directed.

M & L for toothing and bonding with cement mortar (1:6) for openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and as directed.

M & L for 100mm thick Cement concrete 1:2:4 type B- 1, (using 20mm graded aggregate) in floor complete all as specified and as directed.

M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping and on roof etc complete all as specified and as directed.

Dismantling of PVC or AC drain pipe jointed in cement mortar of size 100mm bore complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in wall and fixed with MS clamp complete all as specified and as directed.

s&F of 110mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F of 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

Taking up or down existing steel tubing 15 mm bore and including connections etc complete all as specified and as directed.

Taking up or down existing steel tubing 20 mm bore and including connections etc complete and as directed.

Supply and fixing, jointing and testing galvanised iron tubing 15 mm bore medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor etc complete all as specified and directed.

Supply and fixing, jointing and testing galvanised iron tubing 20 mm bore medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor etc complete all as specified and directed.

S/F in repair of stop valves, cast copper alloy screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 20mm dia complete all as specified and as directed.

S/F in repair of stop valves, cast copper alloy screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 15mm dia complete all as specified and as directed.

Dismantling of wall and celling board ( fiber, pulp, insulation, etc.) or insulated boards/slabs/blankets any thickness, including cover fillets complete all as specified and as directed.

S&F of anodised aluminium snap grid frame work for false celing all as specified and hangers 6mm dia GI adjusting level fixed to roof slabs by means of celling cleats made out of GI flat 40mm X 3mm size 60mm long complete all as specified and as directed.

M&L for for 4 mm thick high pressure steam cured non asbestos fiber cement designer board of size 600mm x 600mm as in ceiling complete all as specified and directed with and including aluminium anodised snap grid frame complete all as specified and as directed.

Demolition of cement concrete (unreinforced )in ground floor and paving n,exc 15cm thickness below or above ground level)complete all as specified and as directed

M&L for 75mm thick cement concrete 1:3:6 type C1 ,using 20 mm graded crushed stone aggregates as in plinth protection/path laid in alternate panel , joint filled with bitumen 85/25 , surface finished even and fair complete all as specified and as directed. Note : The cost of materials for forming and filling joints deemed to be included in the unit rate quoted by the tenderer.

M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors With grey cement and pigments complete all as specified and as directed.

M & L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including Screed bed or bedding layer or mortar 15mm layer of mortar 15mm thick for laying floor finishes with CM (1:6) complete all as specified and as directed.

M & L for Kota stone slab 15-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 thick rendering cement mortar 1:6 complete all as specified and as directed.

M/L for 40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) finish even & smooth with using extra cement complete all as specified and as directed.

M &l for 38mm wide and 3mm thick glass dividing strips complete all as specified and as directed.

Material & Labour for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete ,sub base of floor etc complete all as specified and as directed.

M&L for 50mm thick sand cushioing to under concrete interlocking paver block including watering & consolidation complete all as specified

S&F machine made precast cement concrete blocks (interlocking paves) any colour rubberised of 60mm thick with 6mm top layers of ante abrasive material laid over 25mm thick sand cushion . The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 350kg/Cm2 complete all as specified and as directed..

M & L any coloured Chequered glossy finished cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors With gry cement and pigments complete all as specified and as directed.

S&F in repair 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S & F in repair of Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) in repair including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets, 32mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed.

S&F 15mm dia pillar taps cast copper alloy with capstan heads, cromium plated screwed down high pressure with or without lettered Hot or Cold with long screw shanks and fly -nuts screwed for iron pipe and fixed omplete all as specified and as directed.

M/S M S Constructions

M/s Ravi Traders

M/S DEVANSH ENTERPRISES

Ms Vinay constructions

m/s gupta trading