Hanumanpur Kaniha via Pattakhaman road_Road_Pothole Repair and Berm Dressing, Road Signs_0.000 to 3.300 4.900 to 6.850

Clearing grass and removal of rubbish up ta a distance of 50 metres out side the periphery of the area etc complete

Earth work in embankment with approved materials obtained from borrow pits with all leads and lifts transporting to site,spreading, grading to required slope and compacting at OMC by Vibratory Roller to meet the requirement of Table-300.2 as per Clause 305 of MoRT&H Specifications dfor Road & Bridge works(4th Revision) complet including cost,conveyance,Royalities,Taxes of all materials,all labours,hire and running charges of all machineries,T&P ,sundries etc. complete as per spcification and direction of Engineer-in-Charge.

Providing, laying, spreading and compacting stone aggregate of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing,rolling with three wheel 80-100kN static roller in stages to proper grade and camber, applying and brooming, stone screening/ binding materials to fill-up the interstices of coarse aggregate, watering and compacting to required Grading-2 density as per Technical Specification

Providing & applying Primer Coat with Btumen Emulsion on prepared Surface of Granular Base including clearing of road surface & applying primer at the rate of 0.60 Kg/Sqm using Mechanical meansas per clause 502 of MoSRT&Hl specification for Road & Bridge works(4th Revision) .

Providing and applying tack coat with bitumen emulsion using emulsion distributor @ 0.20kg/sqm on the prepared surface cleaned with mechanical brooms as per clause 503 of MOSRT & H Specifications for Road & Bridge works (4th.Revision) [Output-3500 sqm]

Providing ,laying and rolling of Open Graded Pre-Mix Carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates using 14.60Kg per 10Sqm bitumen to required line, grade and level to serve as wearing coarse on a previously prepared base, including mixing in a suitable plant, laying and rolling with three wheel 80-10kN static Roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508.

Providing and laying 6mm thick precoated seal coat Type-C using 0.06cum of 6.7mm size chips as per sieve analysis and 6.8kg of bitumen per 10sqm including hire and running charges of PRR, hot mix plant tar and all labours and T &P etc.

Reinforced cement concrete M15 grade kilometer stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical specification and direction of Engineer-in-Charge.Fixing of 5th KM stone

Fixing of Ordinary KM stone

Fixing of 200mtr stone