REPAIRS TO ROOF TREATMENT, RENOVATION OF TOILETS FLOORING AND CERTAIN MISC WORKS AT MARRIED ACCN OF 729 UNIT OF AGE B/R (SOUTH) NO. II UNDER GE (SOUTH) SECUNDERABAD

Amount

Taking down shutters of any description exc. 1.00 Sq.m and n.exc. 2.00 Sq.m each all as specified and as directed.

Taking down Chowkats with shutters (Without taking off shutters from frame) area exc 1.5 Sqm but not exc 4.00 Sqm all as specified and as directed.

Taking down Chowkats with shutters (Without taking off shutters from frame) n exc 1.5sqm each complete all as specified and as directed.

S&F of 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube ,supplying and fixing in opening as per manufacturers instructions and as directed by Engineer-in-Charge.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed by Engineer-in-Charge.

S&F 35mm thick plain factory made framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply The size of rail and stile as per IS 1003 (Part-I Kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F, 35mm thick, 2nd class hardwood glazed & skelton shutters, open rebated & prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a). complete all as specified and as directed.

M&L in repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination fixed with timber frame work of cupborads book cases etc completle all as specified and as directed.

S&F 100mm long Stainless steel butt hinges, medium weight cold rolled complete all as specified and as directed..

S&F 100mm long Mild steel butt hinges, medium weight cold rolled complete all as specified and as directed.

S&F 200mm long aluminium barrel tower bolt barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 150mm long aluminium handles cast type anodised all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and as directed.

S & F 300mm long MS ordinary rat tail rod pattern springs inculding roller & roller plate complete all as specified and as directed.

S & F, steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or weldedall as directed by Engineer-in-Charge

S & F, steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete without glazing bars, dovetailed or welded all as directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality fixing with putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F Galvanised mild steel wire cloth 0.50mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples complete all as specified and as directed.

S&F Galvanised mild steel wire cloth 0.50mm nominal dia of wire and average width of aperture 1.18mm fixed with galvanised wire staples fixed in repairs complete all as specified and as directed.

M&L Preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and as directed.

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete.all as specified and as directed.

Removal of old roof treatment of any description and roughening the surfaces of old concrete roof by picking, sweeping clean and washing down with water to remove dust etc including and removing the debris to a distance of n.exc 100 m away from plinth protection all as specified and as directed.

Demolition of cement concrete in any descripition or any position ( roof teratement ) not other wise specifically provide and removing debris to a distance of n.exc 100M away from the bldg complete all as specified and as directed.

M & L for 25 mm thick PCC (1:2:4) type B0 by using 12.50 mm graded stone aggregate as in roof, where required over slabs including necessary form work and finishing the exposed surfaces fair even without using extra cement complete all as specified and as directed.

M & L 10mm thick rendering in CM 1:4 mixing with water proofing compound at the rate of 3% weight of cement over concrete roof slab finish the surfaces even and fair complete all as specified and as directed. (Note : Water proofing compound will be measured and paid separately)

M & L cutting grooves in brick wall of size 75mm wide 65mm deep and shapping to horizontal face of the groove with cement mortar 1:3 complete all as specified and as directed.

M&L priming the plastered roof surfaces with bitumenous primer @ 0.20 Kg per sqm and apply hot bitumen VG - 30 @ 1.20 Kg/Sqm over and applying APP based polymeric membrane minimum weighing 3.5 Kg per Sqm and minimum 3mm thick reinforced with polyster non wove fabric (Wt not less than 150 gms/per Sqm) by forced hot torch application and apply bitumen base Aluminium paint @ 0.20 Kg/ Sqm complete all as specified and as directed.

Supply only water proofing compound

Disconnecting existing tanks setting aside (or laying if required) for carry out the roof repairs cleaning and removing all scale & dirts etc from tanks & hoisting reconnecting & refixing in position of the tank capacity exc 250 Ltrs & n.exc 500 ltrs complete all as specified and as directed.

Disconnecting existing tanks setting aside (or laying if required) for carry out the roof repairs cleaning and removing all scale & dirts etc from tanks & hoisting reconnecting & refixing in position of the tank capacity exc 500 Ltrs & n.exc 1000 ltrs complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tanks 500 litre capacity incl (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling and taking down existing water tank complete all as specified and as directed.

S&F 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe as in repairs complete all as specified and as directed.

S&F 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms)

Taking up or down steel tubing and connections of 15mm dia complete all as specified

All as per item No. 36 above but of 20mm dia

S&F 15mm dia steel water tubing of medium grade galvanised with all fittings & fixing complete to walls & ceilings or laid in floors complete all as specified and as directed.

S&F 20mm steel water tubing medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and as directed.

Taking down rain water pipes of any description any pattern incl all fittings heads, shoes bends etc all as specified and as directed.

S&F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints incl incl all fittings heads, shoes bends etc complete all as specified and as directed by Engr in Charge.

S&F straps, supports or stays for rainwater, ventilating pipes, including bolts, if required with MS Flat Iron brackets for fixing PVC (SWR) pipes of 110mm dia single socketed in any length with @ 2.0 mtr interwell fixed to walls complete all as specified and as directed..

Demolation of Brick or stone masonry built in cement mortar complete all as specified and as directed.

M/L brick work with Flyash bricks built in CM 1:6 straight or curved exceeding 6m mean radius complete all as specified and as directed.

Taking down plastering on brick walls/ celing etc including racking out joints, hacking for key, scrabing down with water etc complete all as specified and as directed.

M/L rendering 15mm thick in cm ( 1:6) on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M/L rendering 15mm thick in two layer ( 10 + 5 mm) CM 1:4 on fair faces of brick or concrete surface II nd layer 5 mm thick with 3% of Water Proofing Compound and finishing the surfaces even and smooth without using extra cement in patch work at various places upto height 7.50m incl necessary formwork complete all as specified and as directed. (Note : WPC Shall be measured and paid seperately)

M & L for 10 mm thick rendering in Cement Mortar 1:4 on soffit of slab/sun shade of Concrete surfaces and finishing even and fair without using extra cement complete all as specified and as directed.

M&L preparation of newly plastered surface of wall and applying two coats of Dr Fixit Rain coat over acoat of prime seal primer complete all as specified and as directed..

M&L preparation of newly plastered surface of celing and applying three coats of white wash complete all as specified and as directed..

M&L preparation of newly plastered surface of wall and applying three coats of white wash complete all as specified and as directed.

M&L preparation of newly plastered surface of wall and applying two coats of OBD over one coats of primer on newly plastered wall complete all as specified and as directed..

Removal of existing treatment on walls and applying two coats of OBD Altek superfine putty over one coat of altek primer to obtain smooth regular/even finish using sand paper and applying two coats of OBD of any tint complete all as specified and as directed.

Demolition of cement concrete in floor paving not exc 15 cm thick (below or above GL) and removing debris to a distance of n.exc 100M away from the bldg complete all as specified and as directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20.00mm graded stone aggregate) as in floor finish the surface even and smooth with out using extra cement complete all as specified and as directed.

S&F Glass dividing stirrs 3mm thick and 38 mm wide complete all as specified & directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40.0mm graded stone aggregate) as in plinth production finish the surface even and smooth with out using extra cement complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded stone aggregate) finished fair & even as in Sub base flooring complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm , as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types in kitchen platform complete all as specified and as directed.

Demolition of cement concrete any descripition and any position not other wise specialy provided ( in Sunken floor) complete all as specified and as directed.

Taking down the plaster incl existing treatment in sunken portion , washing down with water and applying 15mm thick plaster in CM 1:4 with 3% WPC all around incl floors and applying Shaliu Urethane BTD two coats @ 1.5 Kg/Sqm each Coat (Apply 2nd Coat after 6 Hrs) over a coat of Shali Pime WP @ 200gm/sqm and Provide 40mm GI Spout Pipe complete all as specified and as directed.(Note : Supply of water proofing compound will be measured and paid separately .)

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in filling of sunken portion etc complete all as specified and as directed. .

S&F for 20 mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid in trenches

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth

S&F 15mm bore Bib taps, long body cast copper alloy with crutch or butterfly handle, screweddown, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and as directed.

S&F in repair 15mm bore pillar tap cast copper alloy with capstan head ,chromium plated screwed down high presure with or with out lettered fixed with iron pipe complete all as specified and as directed.

S&F in repairs stop cock 15mm dia cast copper alloy fancy type with, chromium plated screwed down complete all as specified and as directed.

S&F in repairs fancy type angle cock 15mm dia cast copper alloy with capstan head ,chromium plated screwed down complete all as specified and as directed.

S&F in repair two way bib cock 15 mm chromium plated complete fancy type of branded complete all as specified and as directed.

S & F in repairs health faucet with spray jet (hand shower) cromium plated incl all fitting & fixtures complete all as specified and as directed.

S & F in repairs 125mm size Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S&F 100 mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F for 50 mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid in trenches complete all as specified and as directed.

S&Fin repair WHB vitreous china (flat back or angle back type ) ,including cutting for pinning in ends size 550x400 mm including brackets ,waste pipe ,coupling ,PVC connection pipe and CP piller tap complete all as specified and as directed.

S&F in repairs wash down water closet (pedestal pattern) white with plastic water closet seat cover closed pattern incl P or S trap with flat bottom and mild steel chromium plated or aluminised hinging device and flush pipe of low density PVC 32mm dia for low level flushing cistern complete all as specified and as directed. .

S & F in repair Vitreous china Squatting pan Orissa pattern of size 580mx440mm wite with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete.all as specified and as directed. .

S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density PVC. 32 mm dia complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl waste pipe complete all as specified and as directed.

S&F Tublar towel rail chromium plated, 20mm dia, D type 60cm,between the flangers complete all as specified and as directed.

M&L Preparing of plastered or unplastered old decorated surfaces and applying one coat of white wash on walls complete all as specified and as directed.

M&L Preparing of plastered or unplastered old decorated surfaces and applying one coat of white wash on Ceiling Surfaces complete all as specified and as directed.

M&L Preparing of plastered or unplastered old decorated surfaces and applying one coat of oil bound distember on walls complete all as specified and as directed.

M & L preparation of old painted surfaces and one coats of synthetic enamel paint on wooden surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and as directed.

M & L preparation of old painted surfaces and one coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and as directed.

M & L Preparation of plastered or unplastered old decorated surfaces of wall and applying one coat of cement base paint complete all as specified and as directed.

PARDEEP AND CO

M/S V PRATAP REDDY

ATUL ENTERPRISES

BEEGEE DESIGN SYSTEMS

SIRITEL SYSTEMS PRIVATE LIMITED