REPAIR TO WATER SUPPLY, PLUMBING AND SANITARY FITTINGS, JOINERY, FLOORING, ROOF TREATMENT AND CONNECTED MISC WORKS AT HQ CE (R AND D) OFFICE AND RESIDENTIAL AREAS UNDER AGE B/R SECUNDERABAD

Amount

M&L vitrified tiles of any shade 8 to10mm thick (square/ rectangular) polished area of each tiles n. exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in CM 1:6 incl dismantling old tiles work complete all as specified and directed.

Ditto as item no 1 above but as in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed or bedding layer in CM 1:4 incl dismantling old tiles complete all as specified and directed.

M&L Non-skid coloured matt finish ceramic tiles 7 to 8 mm thick (square /rectangular ) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floor etc . set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over a screed bed 20 mm thick in CM 1:6 incl dismantling old tiles complete all as specified and directed.

M&L Glazed ceramic coloured tiles as in vertical surfaces 300x600x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm th backing coat of cement mortar 1:4 incl dismantling old tiles all as specified and directed.

M&L 20 mm thick granite work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, landings and like incl 10 mm thick screed bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including grinding and polishing and rounding of edges,including demolition of old granite of any thickness complete, all as specified and directed.

M&L for Cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete including demolition of old cement concrete all as speicified and directed.

M&L brickwork with fly ash bricks straight or curved on plan exc 6.00 m mean radius built in cement mortar 1:6 incl demolition of brick work complete all as speicified and directed.

M&L half brick thick walls with fly ash bricks straight or curved on plan exc 6.00 m mean radius built in cement mortar 1:4 incl demolition of brick work all as speicified and directed.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of pipe line and getting out in hard/dense soil complete all as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick using soil complete all as directed.

Removing excavated material to a distance not exc.50m deposting where directed at a level n exc.1.5m above the starting point complete all as directed.

M&L for construction of Valve chamber built in brick masonry of size 900x900x900mm in cement motar (1:6) including base concrete PCC 1:4:8 mix type D2 100mm thick 230mm thick brick work plastering with cement mortar (1:4) 15mm thick internally & externally including provision of 3 mm thick MS sheet cover fixed with 40x40x6mm angle iron embedded in PCC 1:2:4 mix type B1 coping 100mm thick including painting to sheet & iron work with two coat of synthetic enamel paint over one coat of red oxide primer and three coats of white wash for all plastered surfaces and necessary earth work and excavation in any type of strata complate with locking arragngement lifting handle complete all as specified and directed by engineer-in charge.

M&L for GI water tubing of 15 mm bore 'Medium Grade' with all fittings such as elbow, socket, tee, union and nipples etc, including cutting, threading etc, laid in trenches or fixed to walls complete including taking down unserviceable water tubing and cutting chases on walls where required complete all as directed.

M&L for GI water tubing of 20 mm bore 'Medium Grade' with all fittings such as elbow, socket, tee, union and nipples etc, including cutting, threading etc, laid in trenches or fixed to walls complete including taking down unserviceable water tubing complete all as directed.

M&L for GI water tubing of 25 mm bore 'Medium Grade' with all fittings such as elbow, socket, tee, union and nipples etc, including cutting, threading etc, laid in trenches or fixed to walls complete including taking down unserviceable water tubing complete all as directed.

M&L for GI water tubing of 40 mm bore 'Medium Grade' with all fittings such as elbow, socket, tee, union and nipples etc, including cutting, threading etc, laid in trenches or fixed to walls complete including taking down unserviceable water tubing complete all as directed. Make for item No.14 to 17: ZENITH/ TATA/ JINDAL/SWASTIC

M&L for GI water tubing of 50 mm bore 'Medium Grade' with all fittings such as elbow, socket, tee, union and nipples etc, including cutting, threading etc, laid in trenches or fixed to walls complete including taking down unserviceable water tubing complete all as directed.

S&F for Brass, globe or gate valves of size 25 mm bore with all fittings, iron wheel head,screwed both ends for iron pipe and fixed including taking down unserviceable gate valve complete all as directed.

S&F for Brass, globe or gate valves of size 40 mm bore with all fittings, iron wheel head,screwed both ends for iron pipe and fixed including taking down unserviceable gate valve complete all as directed.

S&F for Brass, globe or gate valves of size 50 mm bore with all fittings, iron wheel head,screwed both ends for iron pipe and fixed including taking down unserviceable gate valve complete all as directed.

S&F Brass Non return valve of 50mm dia with all fittings screwed both ends for iron pipe and fixed complete including taking down unserviceable Non return valve complete. Make for item No.19 to 22: ZOLOTO/ LEADER/MITTAL/ NETA

M&L PCC 1:3:6 type C2 ( using 40 mm graded aggregate ) as in foundations, filling and floors including demolition of existing concrete work complete all as specified and as directed.

M&L for rotational moulded polythene water storage tank (cylindrical vertical with with threaded cover) white in colour, hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs including taking down old tank of any description complete all as specified and directed. Make : SINTEX/ INFRA/ POLYCON

S&F in repair 25 mm PVC ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 15mm bore iron pipe and fixed all as specified and directed. Make: Prayag/Polytuff

S&F in repairs Vitreous China urinal, half stall type of size 46x30x71 cm, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1`:2 , securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed. Make :Cat part No 96010 of Hindware or equivalent in Perryware

S&F in repairs brass chromium plated 40 mm bore dia waste fittings,for urinals with long screwed shanks and fly nuts, flange end embedded red lead cement and other end fixed incl PVC waste pipe complete all as specified and directed

S&F in repairs brass chromium plated urinal spreader heavy duty suitable for half stall urinal fixed with stainless steel screws in position complete all as specified.

S&F in repair CP connections for 15mm bore dia with CP brass nuts and rubber washer of length 450mm fixed for urinals complete all as specified and directed.

S&F 12mm thick Toughened frosted/tinted glass as in urinals partitions fixed on walls with necessary SS brackets and screws including taking down old urinal partition of any description complete in all respect as specified & directed. Make : Modiguard/ saint Gobain

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white, including plastic water closet seat, white, closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete fixed all as specified and directed. Make: Hindware/Cera/Parryware

S&F in repairs brass chromium plated health faucet with 1.2m long PVC tube & wall hook. screwed for 15mm dia bore iron pipe or 2 in one tap all as speicified and directed. Make: Cat Part no F160038 of Hindware or equivalent of Parko

Supply & fix in repairs PVC low level syphonic action type flushing cistern of 10 Ltrs capacity incl PVC flush bend 32 mm dia, for low level flushing cistern complete all as directed. Make: Hindware/Cera/Parryware

S&F in repairs brass chromium plated two in one tap screwed for 15mm dia bore iron pipe complete all as specified and directad Make: Cat Part No F330004CP of Hindware or equivalent make of Parko

Supply and fix in repairs vitreous china wash basin, white, flat back, size 550 X 450 mm with pedestal incl 32 mm dia CP waste coupling, PVC waste pipe incl brackets complete all as specified and as directed. Make: Cat Part No 91049 of Hindware or equivalent make of Parko

Supply & fix in repairs pillar taps of 15 mm bore fancy type cast copper alloy with capstan heads, chromium plated,screwed down high pressure with or without lettered hot cold with long screwed shanks and fly nuts screwed for iron pipe complete all as directed. Make: Cat Part No F330004CP of Hindware or equivalent make of Parko

S&F in repairs 15-mm bore bib taps long body, cast copper alloy with capstan handle, screwed down, and screwed for iron pipe complete all as directed. Make: Cat Part No F330011CP of Hindware or equivalent make of Parko

Supply and fixed in repair stop valve / angle cock fancy type cast copper alloy chromium plated with capstan head serewed down for 15 mm dia iron pipe complete all as directed. Make: Cat Part No F330043 of Hindware or equivalent make of Parko

S&F in repair PVC connections 15mm size with PTMT nuts and washer of length 600mm complete all as directed. Make: Prayag/Polytuff

S&F in repairs stainless steel grating of 125 mm dia cp grating for nahani traps with or without hole for waste pipe complete all as directed

S&F in repairs brass chromium plated tubular towel rail 20mm dia, D type, 600 mm long between flanges all as speicified and directed. Make: Cat Part No F450024 of Hindware or equivalent make of Parko

S&F in repairs chromium plated brass soap dish with screws complete all as speicified and directed. Make : Cat Part No F450022 of Hindware or equivalent make of Parko

M&L 20 mm thick granite of any type in floors machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over 10 mm thick screed bedding (1:6) incl demolition of old granite of any thickness complete, all as specified and directed.

Supply & fixing of UPVC windows or UPVC framed portion 3 track 3 panel sliding window with two glazed and one wire mesh sliding shutters of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature including taking down old windows complete all as directed

Supply & fixing of UPVC windows/ventilators with top hung shutters made out of profile width of from 40 mm to 45 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, with peg stay of suitable size to keep hung shutter in open position, with temper proof screws with and including glazed shutters fixed with 5 mm thick plain sheet glass including taking down old ventilators complete all as directed

Dismantling mild steel work of any description not otherwise described for complete all as specified and directed.

M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified.

Taking down chowkats or frames (without taking off shutter from the frames) not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames (without taking off shutter from the frames) exc 1.5 Sqm but nexc 4.00 sqm each complete all as specified and directed.

Taking down shutters of any description exc.1.0 sqm but n.exc.2.sqm complete all as speicified and directed.

M&L for Plain solid straight chowkats and frames using 2nd class hardwood as in frames,chowkats fixed to existing frame with dash fasteners complete all as specified and directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet and edges will be painted with to match with printed sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F 35mm thick Factory made pressed moulded panelled door shutter of single or multi panel textured masonite moulded door fabricated using well seasoned and chemically treated solid second class hard wood styles, rails and panels made out of tubular core bonded with PF synthetic resin conforming to BWP grade IS: 848. Both faces shall be covered by hot pressing with high density fibre (HDF) of 2.8 to 3 mm thick imported masonite skin. The door's color, texture design as approved by GE all as specified and as directed.

M&L PCC 1:2:4 type B0 using 12.5 mm graded aggregate as in bed block of hold fast complete all as directed

M&L for MS framed work as in hold fasts, bands, straps and similar work con- forming to Fe.290.Gde-E-165 complete all as specified.

S&F 40 mm thick designer flush door shutter, solid core construction with block board core and plywood face panels, and covered with decorative face veneering on both sides all as specified and directed.

S&F powder coated glazed aluminium door using 101.6mm x44.45mm x 2.00mm section chowkhat and 85mmx44.45mm x 2 mm section vertical style and 150.00 mm x44.45mm x2mm bottom and lock rail and 101.6mm x44.45mm x2mm top rails mounted on floor spring and glazed with 5 mm thick plain sheet glass or 12 mm thick PLPB fixed with rubber beading/gasket and powder coated aluminiun beading and one mortice lock, two powder coated alum door handle D type 250 mm long, one powder coated alum tower bolt of 200 mm length and one 250 mm long sliding bolt for each leaf,complete all as directed.

S&F 12mm thick Toughened frosted/tinted glass doors both sides swing with self locking floor spring suitable for glass door fitted with necessary fixing arrangements with wall and stainless steel pivot incl taking down old glass door complete in all respect as specified & directed. Make : Modiguard/ saint Gobain

S&F Stainless steel door lock suitable for glass door of thickness 10-12mm fixed in floors complete with necessary arrangements complete all as speicified and directed.. Make : Godrej/Ozone

S&F Stainless steel door handle 450mm long for toughened glass door including necessary holes in glass complete all as speicified and directed.

S&F butt hinges 100mm medium weight, cold rolled, mild steel complete fixed in position all as directed.

S&F aluminium anodised door stopper of size 150mm of two legs and fixed with steel screws to door shutters complete in all respect and all as specified.

S&F 200mm aluminium anodised barrel tower bolts of extruded section ISI Marked all as speicified and directed.

S&F aluminium handles cast type anodised 200mm ISI Marked all as speicified and directed.

S&F cast brass door stopper of size 150 mm and fixed with brass screws to door shutters complete in all respect and all as specified.

S&F 200 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed all as speicified and directed.

S&F Brass handles, cast type, polished bright 300 mm long and fixed in position complete all as specified and directed.

S&F 250 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed and fixed complete inall respect and all as specified.

S&F 250mm log aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete inall respect and all as specified.

S&F door closer hydraulically of aluminium (Die cast ) body regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed on wire gauzed door all as specified.

M&L for preparation of new steel surface of any description over 10cm width or grith not otherwise described and priming with red oxide zinc chrome primer and finished with two coats of synthetic enamel paint complete all as speicified and directed.

M&L for prepration of new wooden surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer all as speicified and directed.

Taking down cement plaster of any description and thickness on walls/ceillings etc including racking out joints, hacking for key, scrubbing down with water etc and removing away from site complete all as specified and as directed

M&L 15 mm thick polymer modified plaster in CM (1:4) on fair face of brick or concrete surfaces in patches as in facias,fins,chajjas,parapets and similar locations, finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement all as specified. ( SBR latex shall be deemed to be included in quoted rates) Note: The work shall be carried out in three storeyed building and necassary scaffolding and T&P shall be deemed to be inclusive in rates quoted by contractor.

M&L for Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of new plastered surfaces and applying two coats of ACE exterior emulsion paint over a coat of primer on walls all as specified and as directed at site. Make: APEX ULTIMA OF ASIAN

M&L for preparation of old surfaces of walls and applying two coat of ACE Exterior emulsion paint complete all specified and directed

S&F Multicolor fiber roller blinds water resistant, UV protection, transparent, black out suitable for window etc fixed incl taking down old blinds complete all as directed . Make: Vista/Levador/Amar

M&L for 12 mm thick Gypsum board false ceiling fixed with counter sunk screws on and including GI frame work comprising GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sorrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.90mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at apprx 900 mm centre to centre with GI cleat and steel expansion fastener with and including ceiling section (n exc 1.20 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across intermedate at 457mm centre to centre at desired heights below roof slab, including two coats of plastic emulsion paint (approved colour) over a coat of primer over 3 mm thick cement based putty on surfaces of ceiling boards including taking down existing ceiling board with frame work complete all as specified and directed.

Dismantling boarding incl frame work of any description, fixed as in cupboards and wall panelling and similar items etc complete all as specified and directed.

S&F Soft closing Hydraulic regular hinges automatic closing type suitable for cupboard doors of thickness 1-1.5mm complete all as directed Make : Godrej or equilvalent make

S&F PVC Celuka ply prelaminated on one sides, 18mm thick, for use in kitchen cabinet,cupboards, cabinet shutters and front of drawers, duly fixed with with solvent adhesive, shaped to receive glass / steel baskets, fixed in position with and including provision of all necessary fixing arrangements i.e., anchoring to walls with dash fasteners of suitable length /screws as applicable, complete all as specified and directed. Make (for PVC sheets):- Sintex / Rajshree

S&F PVC Celuka ply prelaminated both sides, 18mm thick, for use in kitchen cabinet,cupboards, cabinet shutters and front of drawers, duly fixed with with solvent adhesive, shaped to receive glass / steel baskets, fixed in position with and including provision of all necessary fixing arrangements as per site requirements Make (for PVC sheets):- Sintex / Rajshree

S&F stainless steel handles 75mm long made of SS 304 complete all as specified and directed.

S&F ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in all as speicified and directed.

S&F 110mm bore PVC (SWR) pipes 5mm thick, single socketed, with all fittings such as branch piece with access doors, bends with access doors, floor trap and reducers etc in any length with rubber ring joints, including all fittings laid in trenches or in floors including taking down old pipes with fittings complete all as specified and as directed. Make: Prince/Kissan

S&F solid PVC wall panelling consisting of 5 mm thick PVC sheet prelaminated one side inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including taking down old panelling complete all as specified and directed. Make: Rajshree/Sintex

S&F 5mm thick plain PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing including taking down old fillets complete all as specified and directed. Make: Rajshree/Sintex

S&F 18 mm thick plywood grade BWR type BB, laminated with decorative lamination sheet 0.9 mm thick fixed with approved adhesive as per manufacturer's instructions as in wall panelling consisting fixed on timber frame work including taking down old panelling complete all as specified and directed.

M&L for PCC 1:2:4, type B0 (using 12.5mm graded stone aggregates), n.exc 25mm thick as in levelling course over roofs incl demoition of old roof treatment with concrete complete all as specified and as directed.

(a) M&L cleaning the surface, removing dust dirt, loose particles and unsound substrate and providing 15mm thick cement screed (1:4) mixed with Dr Fixit water proof compound as per manufacturer's direction. (b) Applying primer coat with solvent based bitumen primer @ 0.30 ltr/ Sqm (c) Align Dr Fixit/STP torch shield water proofing 3mm thick membrance weighing not less than 3.00 Kg/Sqm using gas burner to heat substrate, pressing firmly from lower end to upper end with 100mm over lap (d) Heat both overlap with round trowel to seal over lap excess compound smoothened, pressed into seam using hot trowel (e) Seal edges well into grooves & protect with CM 1:2

M&L Hydraulically pressed plain cement concrete tile of size 250x250x19/20mm laid over & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed pointed in CM 1:3 mixed with 5% crude oil by weight of cement.

S&F in repair electronic urinal of size 425x 410 x 645mm neutral integrated AC/DC with power source complete all as directed Make: Parryware code C0588 or Equivalent in Jaquar /Hindware

S&F electronic sensor type pillar taps for wash basin incl all accessories complete Make : Parryware/Jaquar

S&F PVC (SWR) pipes,150 bore of pipe, single socketed, in any length with rubber ring joints, fixed in position including making necessary holes in walls or parapet and making good with cement mortar 1:4 and taking down old rain water pipe of any description and in any position complete all as specified and directed.

S&F in repairs 150mm PVC (SWR) bends any radius complete all as directed

M.R.ENTERPRISES

M/S PAVANI ENTERPRISES