GE 861 EWS-58/2024-25

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Hard/Dense soil complete all as specified and directed by Engr-in-Charge.

Excavating over areas, n exc 1.5 m deep and getting out in Hard / Dense soil complete all as specified and directed by Engineer-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc including getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed by Engr-in-Charge.

Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

M&L for hard core of gauge exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.

M&L for PCC type D2 (1:4:8) (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L for Reinforced cement concrete (Design Mix) M-25, using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L for Reinforced cement concrete (Design Mix) M-25, using 20mm graded crushed stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed by Engineer-in-Charge.

M&L for Reinforced cement concrete (Design Mix) M-25, using 20mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engineer-in-Charge.

M&L for Reinforced cement concrete (Design Mix) M-25, using 20mm graded crushed stone aggregate as in Chajjas complete all as specified and directed by Engineer-in-Charge.

M&L for Reinforced cement concrete (Design Mix) M-25, using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

M&L for Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat rough finished surface of concrete complete all as specified and directed by Engineer-in-Charge.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions flat rough finished surface of concrete complete all as specified and directed by Engineer-in-Charge.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. flat and rough finished surface of concrete complete all as specified and directed by Engineer-in-Charge.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat and rough finished surface of concrete complete all as specified and directed by Engineer-in-Charge.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

M&L for 40mm thick cement concrete (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed by Engineer-in-Charge.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

M&L for 100 mm thick PCC type C2 (1:4:8) (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick Cement concrete type C-1, 1:3:6 (using 40mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick, joint free, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry over 10mm thick rendering with cement mortar 1:4 and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed by Engr-in-Charge.

M&L for Rendering 12mm thick in cement mortar 1:4 using liquid waterproofing compound as per manufacturer's instructions on fair faces of brick work or concrete surfaces of wall finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. Note:- Water proofing compound shall be measured and paid separately.

M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces of wall finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Supply only Liquid water proofing compound complete all as specified and directed by Engr-in-Charge.

M&L for 5mm thick rendering on fair faces of brick work or concrete surfaces of ceiling with cement mortar 1:3 finished even and smooth (without using extra cement) complete all as specified and directed by Engineer-In-Charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oli bound distemper over a coat of alkali resistant primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newely plastered surfaces of ceiling and applying three coats white wash complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class hardwood Plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick 2nd class hard wood rail & style framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.

S&F 30mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed by Engr-in-Charge.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed by Engineer-in-Charge.

S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-in-Charge.

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-In-Charge.

S&F Mild Steel work as in framed roof trusses, purlins, rails and fastenings including distance pieces, cleats etc conforming to Fe 410 W (Gde - E250) Quality 'A' complete all as specified and directed by Engr-in-Charge.

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheets 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheets 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description, n exc 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of syntheic enamal paint over a coat of red oxide priemer complete all as spefied and as directed by Engineer-in-Charge.

M&L for second class hard wood timber plan fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc 13 sqcm & n exc 25 sqcm complete all as specified and directed by Engr-in-Charge.

M&L for second class hard wood timber plan fillet, square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc 6 sqcm & n exc 13 sqcm complete all as specified and directed by Engr-in-Charge.

M&L for 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face on one side fixed in ceiling, flat or sloping, with nails to timber frame work complete all as specified and directed by Engr-in-Charge.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks built in cement mortar 1:4 in walls complete all as specified and directed by Engr-in-Charge.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed by Engr-in-Charge.

M & L for 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-In-Charge .

S&F factory made solid PVC door frame of size 50mmx47mm made out of 5 mm wood grain printed PVC sheet with mild steel square tube complete as per manufacturer specification & drawing complete all as specified and directed by Engr - in - Charge.

S&F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of mild steel tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement fixing in the frame at site as per specification ,drawing complete all as specified and directed by Engr - in - Charge.

Supply and fix butt hinges 100mm, medium weight, stainless steel all as specified and directed complete all as specified and directed by Engr-in-Charge.

Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

Supply and fix 150 mm aluminium handle cast type, anodised, complete all as specified and directed

S&F in repairs Vitreous China wash down water closet (Squat pattern) white, excluding flushing cistern and flush pipe "Orissa" pattern size 580x440 with integral foot rest inlet connection to trap anti syphonage etc complete including joint between flushing pipe and socket of WC complete all as specified and directed by Engr-in-Charge.

S&F 10Ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-Charge.

Supply only Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern etc complete all as specified and directed by Engr-in-Charge.

Supply & fix vitreous china wash basin, white, flat back, size, 550X400mm including bracket for fixing 32 mm waste coupling, waste pipe etc complete all as specified and directed by Engr-in-Charge.

S&F Pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT or COLD' with long screwed shanks and fly-nuts, screwed for iron pipe or for connection pipe complete all as specified and directed by Engr-in-Charge.

S&F Bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F stop valve of 15mm bore , fancy type, chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F stop valve of 15mm bore, cast copper alloy, high pressure, with cruch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.

S&F PVC connection 15 mm size PTMT nuts of length 600 mm complete all as specified and directed by Engr-in-Charge.

S&F soap dish vitreous china white size 160x160x90mm approx complete all as specified and directed by Engr-in-Charge.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-Charge.

S&F CP tubular towel rail 20mm dia D type 60cm aluminium anodised between two flange including bracket complete all as specified and directed by Engineer -in-Charge

S&F Brass chromium plated shower rose 125mm size complete all as specified and directed by Engr-in-Charge.

S&F 15 mm dia bore steel tubing medium grade galvanised with all fittings and connection complete all as specified and directed by Engr-in-Charge.

S&F 20mm dia bore steel tubing medium grade galvanised with all fittings and connection complete all as specified and directed by Engr-in-Charge.

S&F 20mm bore gun metal glove or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed by Engr-in-Charge.

S& F 500 Ltr capacity Rotational moulded polyethylene water storage tanks 3 layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/wall or in floors complete all as specified and directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed by Engr-in-Charge.

S&F 110mm PVC (SWR) junction single, (Double T) equal or unequal complete all as specified and directed by Engr-in-Charge.

M&L 75mm outlet dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius for manholes/septic tank/soak well etc/ in sewer works with old size bricks in Cement Mortar (1:6) complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering in cement mortar (1:4) inside and outside brick wall of manhole /septic tank /concrete surfaces even and smooth with out using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for Setting coat of 3mm thick of cement mortar (1:2), trowelled to even and smooth finish over rendering 15mm thick in cement mortar 1:4 on fair faces of brick work finished surface even & smooth with using water proofing compound @ 2% complete all as specified and directed by Engr-in-Charge.

M&L for providing RCC precast cement concrete type B-0 (1:2:4) (using 12.5 mm graded crushed stone aggregate) as in cover slab for manhole and similar article with plain face set in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge. Note : Reinforcement shall be measured and paid separately.

M&L for Concrete bed to 150 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate complete all as specified and directed by Engr-in-Charge.

M&L RCC pipes class NP-2 with socketed ends laid and jointed complete of 150mm bore complete all as specified and directed by Engr-in-Charge.

Construction of 1.2 M dia and 3m depth Soakage wells including excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 design mix concrete including intercepting chamber and screen chamber made of Brick masonry in cement mortar 1:4 RCC cover slab in M25 design mix, using 20mm graded crushed stone aggregate concrete/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size complete all as specified and directed by Engr-in-Charge.

M&L for on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 20 users complete all as specified and directed by Engr-in-Charge.

M & L for concealed point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC conduit medium grade of suitable size run on concealed with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed by Engr-in-Charge.

Description All as per srl item No-94 here in above but for one 3 pin 5A socket outlet independent controlled by one switch complete all as specified and directed by Engr-in-Charge.

Description All as per srl item No-94 here in above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and directed by Engr-in-Charge.

Description all as per srl item No 94 above but for 3 pin socket outlet 15 Amps independent board with 2.5 Sqmm complete all as specified and directed by Engr-in-Charge.

S&F in replacement switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed by Engr-in-Charge.

S&F in replacement Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal 240 volt complete all as specified and directed by Engr-in-Charge.

S&F in replacement Switch socket combination 2 in 1, 3 pin, 15 Amp flush type universal 240 volt complete all as specified and directed by Engr-in-Charge.

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed by Engr-in-Charge.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed by Engr-in-Charge

Supply and fixing LED lamp 10 W complete all as specified and directed by Engr-in-Charge.

S&F decorative ultra slim linear LED 20 Watt 4' long lighting fixture with extruded al heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up three copper flexible cable from ceiling rose to fittings including connecting up and fixed on including two nos PVC square box of required size complete all as specified and directed by Engr-in-Charge.

S&F LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-Charge.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed by Engr-in-Charge.

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified and directed by Engr-in-Charge.

Supply & fixing MCB, SPN (single pole neutral), AC, 240 volts, B series capacity 32 Amps 10kA and making connections complete all as specified and directed by Engr-in-Charge.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lugs, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in electric plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm centre to centre both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed by Engr-in-Charge.

Supply and Fixing exhaust fan 300 mm sweep PVC body with louver, 240 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable, nut bolt and other fixing material complete all as specified and directed by Engr-in-Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engr-in-Charge.

Supply and installed water heater vertical type, stationary storage type of 25 ltr capacity having S/S inner vessel, five star rating, ISI Marked close/vented type (star marked), 240 volts with heating element and auto cut thermostat, maximum output of hot water is 60 degree celsius, including fixing arrangement nut bolts, washer/fasteners and finishing work etc complete as per existing surface, complete all as specified and directed by Engr-in-Charge.

Supply and laying or fixing or passing through pipe or binding with fencing/pole etc, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 Sq mm nominal cross section 2 core solid conductor complete all as specified and directed by Engr-in-Charge.

M&L for Cutting existing CI/GI pipe line of 20 mm to 50 mm dia and inserting tee and taping new connection with all accessories complete all as specified and directed by Engr-in-Charge

M/S BILAL AHMAD BHAT (BID ID -3151676)

M/s M Ashraf and Brothers (BID ID -3151403)