Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.5 LAccepted-AOC | L1 | Accepted-AOC SINCE L1 | |
| 2 | L2₹34.3 L+₹30,344.84 (0.89%)Rejected-Finance | L2 | Rejected-Finance SINCE NOT L1 | |
| 3 | L3₹35.3 L+₹1.3 L (3.95%)Rejected-Finance | L3 | Rejected-Finance SINCE NOT L1 |
Tender Value
₹35.6 L
EMD Value
₹71,200
Closing Date
20 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE DEOLALI
GE DEOLALI, 422401
SPL REPAIR TO BLDG NO. P 167/2/3,3,4 OF OLD CHUSHUL ENCLAVE AND PROVN OF UNISEX TOILET GENTS LADIES AT SP1 IN DEVLALI FIELD FIRING RANGES DFFR SOA UNDER THE AOR OF GE DEOLALI
2022_MES_524223_3
8088/E8
Open Tender
Civil Works
Item Rate
180 days
GE DEOLALI
CLASS D CAT a i
8 documents required · 8 mandatory
₹500
Yes
GE DEOLALI
₹71,200
Yes
8 Sept 2022
28 Jun 2022
22 Jul 2022
28 Jun 2022
20 Jul 2022
28 Jun 2022
Amount
Dismantling of stone slab and tiles laid bedded and pointed in any mortar description or thickness in floors, apron etc Complete all as specified.
M & L for screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes Complete all as specified.
M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Squre/Rectangular) are of each Tile Exc 0.18 Sqm but N exc 0.38Sqm in floors etc, set jointed and pointed incoloured cement to match in floors complete all as specified.
All as per Item No -3 but as a skirting incl. 10mm thick rendering as in back coat CM 1:4 complete all as specified.
M&L for Ceramic Non-skid colouerd tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc.set and jointed in neat cement slurry with and pointed in coloured cement to match the colour of tiles all as spd all as specified.
M&L for Glazed ceramic coloured tiles of size. 350x250x7mm/450x350x7mm thick on vertical surfaces of walls such as skirting dado etc over 10mm thick back coat in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete.
M & L for Granite 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing types all as specified.
M & L for Machine cut cudappa stone slab 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.
M & L for Machine cut kota stone slab flooring 20-25mm thick in riser of steps, skirting, dado, window cill and pillar laid over 10mm thick in cement mortar 1:4 etc, and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and mirror polishing complete complete all as specified.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified.
Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 15 mm dia pipe complete all as specified .
Taking up or down steel tubing and connections, including cleaning for re-fixing and removal to store 20mm dia pipe complete all as specified .
S & F 15 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.
S & F 20 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.
S & F in repairs 15 mm dia Stop valves, cast copper alloy, screwed down, high pressure, fancy type, chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified.
S&F in repairs 15 mm bore bib cock with wall flange, cast copper alloy, chromium plated, fancy type with screwed down, screwed for iron pipe or for brass ferrule long body.Make: Jaquar/Somany.
S & F in repairs 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated with fancy type, screwed down high pressure, with or without lettered 'Hot' or ' Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified.
S & F in repairs Vitreous China oval shape wash basin, white, flat back, size 580 x 450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets with 32 mm dia Waste fittings, brass, chromium plated with waste pipe complete all as specified.
S & F 32 mm dia Low density polyethylene pipes ( LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified.
S & F in repairs brass chromium plated Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified.
S & F in repairs Vitreous china wash down water closet pan ( pedestal pattern ) white ( excluding fixing bolt, flushing cistern and flush pipe ) complete all as specified.
S & F in repairs 10 Litrs PVC valveless,low level flushing cistern, low level, white with inlet, ball valve, float and handle including brackets with 32 mm dia flush pipe of polyethylene of low or high density or PVC, for low level cistern complete all as specified.
S & F in repairs Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.
S & F 75 mm dia PVC ( SWR ) floor trap, plain with grating including jointing with solvent cement complete all as specified.
S & F PVC connections15 mm size with PTMT nuts of length 450 mm complete all as specified.
Dismantling water tanks and removing to store of capacity exc 500 & not exc 1000 ltrs.
Supply and and fixing, hoisting PVC tank of 1000 ltr capacity including Supplied and fixed 20mm dia PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.(Minimum weight 15mm-142 gms/20mm-210gms/25mm-455 gms/40mm-690 gms float valve assembly complete all as specified and directed.
S&F soap dish chromium plated and type fixed to plugs with CP brass screw fixed in repairs.
S&F in repairs CP Basin Mixer for mixing hot & cold water of approved quality.
S&F in repairs wall mixture mixing valves incl. three joints to steel pipes or unions 15 mm bore fancy type best quality as per sample approved by GE fixed in reapirs.Make- Jaquar/Hiindware/Somany
S & F floor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm.as in repairs complete all as specified.
S&F stainless steel plate rack of size not less than 90cmx75cm fixed with stainless steel screw including taking out old unserviceable wooden plate rack as approved by GE complete all as specified.
S&F in repairs chromium plated shower roses with swivel joints 125 mm dia size incl fixing to GI pipe/union fixed in repairs.
S&F in repairs glass shelf corner of size 225mm x 225mm thickness of glass 6mm) with CP brass railing and brass screws
S&F in repairs healthfocet of 15 mm bore with CP pipe complete set of make - parryware/Prayag
Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.
M&L Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 all as specified and as directed.
S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified. ( Design of sheet as mangalore tiles pattern in Red colour ).
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.
M & L for applying two coats of synthetic enamel paint over priming with red oxide over preparation of new surfaces of any description over 10 cm in width or girth complete all as specified and as directed.
Dismantling of wall and ceiling board(fiblre, pulp, insulation etc) any thickness including cover fillets complete all as specified and as directed.
S & F powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Min Tee runners of size 50mm x 50mm x 1.5mm and cross Tee of size 50mm x 50mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm complete all as specified and as directed.
M & L for 4mm thick non asbestos fibre cement building boards of make 'E board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework with complete all as specified and as directed.
Taking down cement mortar plastering on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc complete all as specified and as directed.
M&L for rendering 15mm (in two layers 10mm+5mm) thick plaster in CM (1:4) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth ( without using extra cement ) with sagol finish on plastered surface complete all as specified and as directed.
M&L for rendering 5mm thick plaster in CM (1:3) on faces of brick work or concrete on surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new decorated plastered or unplastered surfaces of walls and applying two coats of weather emulsion colour as specified and directed by Engr-in-charge over one coat of primer over 2mm thick Putty for levelling and smoothening, complete all as specified and directed.
M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over 1.5mm thick wall care putty over one coat of chalk whitening primer complete.
M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed.
Demolition of concrete in ground floors & paving not exc 15cm thickness (below or above ground level) complete all as specified.
M & L for Cement concrete as PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as foundations,filling and mass concrete complete all as specified.
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection/floors complete all as specified and directed.
Demolition of brick work or stone/boulder masonary, laid in cement mortar or cement lime mortar complete all as specified.
M&L for fly ash bricks, straight or curved on plan n.exc 6m mean radius in cm 1:6 using old size brick complete all as specified.
Taking down shutters of any description exc 2 sq.m each complete all as specified.
M & L for 2 nd class hardwood as glazed and skeleton shutters 35 mm thk open rebated and prepared to receive glass, gauze, etc (without sash bars ) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutter as specified in SSR Part l, section 8, clause 8.24 ( a ); supplied and fitted to chowkats complete all as specified and as directed.
S & F 35 mm thick second class hardwood plain,framed,panelled shutters ( any number of panel ) with panels of timber flat on both sides (feather edged ) or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to choukats complete all as specified.
Taking down chowkat or frame with shutters (with out taking off shutter from the frame ) not exceeding 1.5 Sqm each as directed by Engineer-in-Charge.
Taking down chowkats or frames exc.1.5 sq.m but not exc. 4 sq.m each but with shutters ( without taking off shutters from the frame ) and removing to or from store complete all as specified and as directed.
Taking down shutters of any description exc 1 sq.m and n.exc 2 sq.m each store complete all as specified and as directed.
M & L for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified.
M & L for Factory Made solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face & 5mm thick plain colour pvc sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified.
S & F powder coated aluminium sliding window,three track shutters, side hung type with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, Chowkats aluminium snap beading, screws, suitable handle etc with and including sheet glass or ordinary glazing quality of 5mm thick and incl GI wire mesh 0.56 mm nominal dia of wire and average width of aperture 1.18 mm , size of side rails , top rails , bottom rail 85x44.5mm and size of chowkat frame 101.6x44.45mm and thickness of aluminium member shall be 1.40mm thick complete all as specified.
S&F in repairs Stainless steel drapery rod of 20 mm inner dia (in lengths as directed) of & including decorative finial at both ends and pair of S S steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, (Victorian design)all as specified & as directed. Make -Vista, sample are avaible in the office for checking and quoting the same
M&L for preparing old decorative plastered surface of walls by removal of existing treatment washing rubbing down and applying two coats of distemper oil emulsion oover a coat of chalk whiting primer over one coats of care wall 1.5mm thk putty all as specified and directed by engr-in-charge.
S&F Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixing complete all as specified.
S & F Butt hinges, medium weight, cold rolled mild steel, and fixed 75 mm length complete all as specified.
S & F Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, and fixed 100 mm length complete all as specified.
S & F Aluminium, anodised, barrel tower bolts, of extruded section and fixed 100 mm complete all as specified.
S & F Aluminium handles, cast type, anodised handle 100 mm complete all as specified.
S & F Aluminium handles, cast type, anodised handle 150 mm complete all as specified.
S & F Aluminium, anodised, barrel tower bolts, of extruded section and fixed 150 mm complete all as specified.
S & F Butt hinges, medium weight, stainless steel, and fixed 100 mm length complete all as specified.
S & F 250mm aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type ) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.
S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified.
S&F in repairs for glavinized mild steel wire cloths 0.56mm nominal dia and avrage width of apreture 1.18mm & fixed with tint tacks or glavinized wire staples all as specified.
S & F in repairs 300 mm long MS helical door spring, inclunding roller and roller plate complete complete all as specified.
M & L for Cement concrte Type C1 1:3:6 ( usingt 20 mm graded stone aggregate ) as in roof kerbs or mud stops, rounded or chamfered on edges all as specified.
S & F Mild steel as hold fasts Fe.290.Gde-E-165 complete all as specified.
M & L for applying two coat of synthetic enamel paint of wooden surface over a coat of pink primer including preparation of new surfaces of any description, not otherwise described, over 10 cm width or girth complete all as specified.
S&F framed work such as grills, gratings, etc with ends of bars, shouldered and /or riveted, or forged into spicks, framed guard bars, ladders, framed balusters, walk ways, railings, framework of water tankd and similar work conforming to Fe 410-O all as specified.
Dismantling PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and directed by Engr-in charge..
S&F PVC (SWR) pipe 110 mm dia single socketed in any length with rubber ring jointed level fixed to walls complete all as specified and as directed.
S&F PVC (SWR) pipe 75 mm dia single socketed in any length with rubber ring jointed level fixed to walls complete all as specified and as directed.
S&F PVC (SWR) bends with access door 110 mm dia complete all as specified and as directed.
Ditto as per item No 89 above but 75 mm dia.
S&F PVC (SWR) plain bend 110 mm dia complete all as specified and as directed.
S&F PVC (SWR) plain bend 75 mm dia complete all as specified and as directed.
S&F PVC (SWR) branch piece single or double T equal or unequal with access door 110 mm dia complete all as specified and as directed.
All as per Item No 93 above but 75 mm dia.
S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and as directed.
S&F in repais for prelaminated particle board 18/19 mm interior grade prelaminated on one side with decorative choice lamination and other side balancing white lamination fixed with screw timber frame work Including dismantling board all as specified.
S&F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified.
S&F frosted glass 4.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes.
M&L for preparation of old painted wood & wood based surfaces of any description, not otherwise described over 10cm width or girth and evenly applying one coat on synthetic enamel paint complete all as specified and as directed.
All as per item No. 99 above but on steel & Iron surfaces.
S&F sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes.
Taking down carefully existing unserviceable bitumen felt(any number of layers) including plaster of any thickness,wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall,PCC fillets,benching etc and removing of the rubbish to a distance not exceeding 500 M from the building and depositing where complete all as specified and directed.
Demolition of cement concrete of any description (Unreinforced) below or above ground floor incl concrete at junctions of parapets and roof terraces, flashings, Kerbs walls,PCC fillets, benching,coving of chajjah top/junctions etc complete all as specified and directed.
Supplied only integral water proofing compound.
M &L for providing plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) for roof, kerb, or mud stops,rounded or chamfered on edges etc complete all as specified and as directed .
M&L for rendering 10mm thick CM (1:4) on roof slab top, mixed with water proofing liquid finished even and fair without using extra cement complete all as specified. Note: Water Proofing liquid shall be measured and paid separately.
M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :-
i) Apply one coat of oil bound bituminous primer @ 0.25 kg/Sq.M ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.5 Kg / Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufacturer's iii) Apply one coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over non assesble roof surfaces complete all as per manufacturer's instructions and as directed .
M&L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 with WPC liquid Complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plastered surfaces.rendering again 10mm thick in CM 1:4 mixed with Complast - 421 filling the sunken floor with PCC 1:5:10 using brick bat area of floor upto 1.5 Sqm including 40 mm dia 0.60 m pipe complete all as specified and as directed.
All as per ite No 108 herein above but for kitchen area n exc 0.50 sqm on plan all as specified and directed.
M&L special treatment to floor/wall of bathroom with 10mm thick plaster in CM 1:4 with WPC liquid Complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plastered surfaces.rendering again 10mm thick in CM 1:4 mixed with Complast - 421 complete all as specified and as directed.
Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work.
M&L for RCC (nominal mix) Type B1 1:2:4 (uisng 20 mm graded stone aggregate) in chajjas.
Formwork to chullah hoods, chajjas, troughs and similar items including edges, flat rough finished surfaces of concrete
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
All as per item No. 114 above but 6mm to 8mm dia.
M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth all as specified.
M&L for 6mm thick teak wood leaping all around for 19/20mm shutter including necessary rebating where required fixed with headless screw complete all as specified
M&L for 6mm thick plywood grade BWR type BB fo (05 no of ply) fixed with screw to timber frame work complete all as specified
S & F continuous (piano) hinges, mild steel bright finish or electro galvanished with width of flaps 30mm (when open), complete all as specified and directed.
Supply and fix 40mm dia cupboard knobs fixed with nuts, screw and washers of mild steel bright finished, powder coated, fancy type complete all as specified and directed.
S&F in repairs LED convex mirror all as specified.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil etc., complete all as specified and directed.
Excavating in trenches, exc 1.5 m and n exc 3 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil etc., complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. etc., complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point etc., complete all as specified and directed.
M&L for Hardcore of gauge broken stone or boulders n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc., complete all as specified and directed.
M&L for Cement concrete Type D2 (1:4:8) (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete etc., complete all as specified and directed.
M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer etc., complete all as specified and as directed.
M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of primer etc., complete all as specified and as directed.
M&L for providing, precast cement concrete type B1, 1:2:4 20 mm aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, and setting in mortar complete with joints to match set in CM 1:4 etc., complete all as specified and as directed.
M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping/haunching benching finished even and fair including necessary form work etc., complete all as specified and as directed.
M&L for preparation of newly untreated surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over priming with red oxide zinc chrome etc., complete all as specified and as directed.
M&L for non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, with 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface etc., complete all as specified and as directed.
S&F Steel ventilator with top hung shutter including hinges, steel peg stay etc., complete all as specified and as directed.
S&F PVC(SWR) vent cowl of 75mm bore complete all as specified and as directed.
S&F PVC water jet for pedestial pattern water closet of 15mm bore and 600mm long complete all as specified and as directed.
S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.
S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and as directed.
S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and as directed.
M&L for 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.
M&L for PCC (1:3:6) type C2 ,using 40mm graded stone aggregate.,as in concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 200 mm bore for NP3 pipes complete all as specified and directed.
M&L for reinforced concrete pipes class NP3 laid and jointed in cement mortar complete with collars 200 dia bore of pipe all as specified and directed.
S&F for Hume Pipe septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 10 users.
M&L for Soakage wells exc, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber,screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats, complete of size 1.2 M dia X 3.0M deep. (Ref TD Drg No: CEPZ-2019-TD-03 (SHT 1/2 & 2/2)
S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) etc., complete all as specified and as directed.
S&F 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets etc., complete all as specified and as directed.
S&F Vitreous China wash basin, white, flat back, size 580x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets etc., complete all as specified and as directed.
S&F Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan WC/Anglo indian type incl all fixtures etc., complete all as specified and as directed.
S&F 32mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and as directed.
S&F tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
S&F chromium plated shower rose with or without swivel joints 125 mm dia size including fixing to GI pipe/union complete all as specified and as directed.
S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.
S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low leve cistern complete all as specified and as directed.
S&F 15mm dia Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
S&F 15mm dia Stop valves, fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S& F 15mm dia Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
Taking down carefully unserviceable copper/aluminium point wiring of any description including all fittings (switch , socket, switch socket combination, lamp holder, ceiling rose, regulator etc.) and making good disturbed surfaces of wall, floor etc. to match with existing finishes complete all as specified and as directed.
Taking down unserviceable sub mains wiring including earth continuity any type / size with surface casing / caping / TW batten / PVC conduit surface or recess and making good disturbed surfaces to match with the existing finishes complete all as specified and as directed.
Dismantling and taking down unserviceable main switches, DB etc. any type / size and making good disturbed surfaces to match with the existing finishes complete all as specified and as directed.
Material and labour for point wiring with two runs of stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for One light point controlled by one switch.
All as per Item No-162 but One fan point controlled by one switch
All as per Item No-162 but One 3 pin socket outlet 5 Amps on the same board.
All as per Item No-162 but One 3 pin socket outlet. 5 Amps on the independent. board
All as per Item No-162 but One bell point controlled by one switch
All as per Item No-162 but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire.
All as per Item No-162 but One 15 A socket outlet on the same board with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire.
Supply and fix switch piano flush type single pole one way 5 Amps complete all as specifed .
Supply and fix Bell push button 5 Amp, flush type complete all as specified .
Supply and fix Bell, Ding Dong electric AC 230 Volts single pole complete all as specified and as directed.
S&F for switch socket combination 3 pin 5 Amps flush type (multi purpose ) complete all as specified and as directed.
S&F for switch socket combination 2 in 1, 3 pin, 5 and 15 amp flush type universal complete all as specified and as directed.
S&F Call Bell, ding dong type suitable for 230 / 240 volts AC 50 Hz supply
S&F steped type electronic fan regulator flush type (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep 100 watts
S & F in replacement of lamp angle/batten holder Bakelite Pin/Retrofit type with 10 watt LED Lamp (B22) all as specified and as directed.
S&F surface/wall mounted LED Light fittings, regal Batten Double side for LED Tube suitable for T8 LED 4 feet long lamp, with 18 W LED, with suitable driver complete all as specified and as directed. Make: Havells (Cat No: REGALBATTENT 5UPTO1X18WDSBSWH + CRYSTAL 1213T8DSTL18WLED865SGLASS) or equivalent in Crompton Greaves / Bajaj/wipro
S&F wall mounted LED Light fittings, 2 feet long, with 9 W LED and suitable driver complete all as specified and as directed. Make: Havells (Cat No: LUMILINEBS9WLED865SPCWH) ) or equivalent in Crompton Greaves / Bajaj
Taking down light fittings any type and S&F Decorative wall light fixture with made up of Polycarbonate, B22 base with 10 Watt LED lamp all as specified and as directed . Make: Havells city-2 LHDL03160099) or equivalent in Crompton Greaves / Bajaj
S&F LED Light fitting 1x9W Bulkhead luminaires including LED light driver connecting up with three core flexible copper conductor cable of suitable size
Supply & Install in replacement of building security light 30W LED energy saving Luminaire With high Power LED as light Source, Symmetric type including required size of GI bracket ,accessories, clamps and eletric connections complete all as specified and as directed. Make : Havells (Cat NoENDURAPEARLSL30WLED757SASYTOPCMP
S&F Plug & Socket DB, CRCA Sheet steel, powder coated, with metal plug & socket 3 pin with 20 Amps MCB SP complete as specified and directed Make : L&T (Cat No: DBMPPS332SD)
S&F Sheet Metal enclosure for TPN DBs, 4 Ways, Double Door(IP-43), built- in bus bars complete suitable for 240 Volts, AC, 50 Hz complete all as specified and as directed Make: L&T / Legrand /C&S/Havells
S&F Sheet Metal enclosure for SPN DBs, 12 Ways, Double Door(IP-43), built- in bus bars complete suitable for 240 Volts, AC, 50 Hz complete all as specified and as directed Make: L&T / Legrand /C&S/Havells
S&F MCBs, TPN, 440 volts, breaking capacity 10 KA, rating 40-63 amps, complete all as specified and as directed. Make: L&T / Legrand /C&S/Havells
S&F MCBs, SPN, 240 volts, breaking capacity 10 KA, rating 40-63 amps, complete all as specified and as directed. Make: L&T / Legrand /C&S/Havells
S&F MCB, SP,240 volts, breaking capacity 10 KA, rating 6 to 32 amps, complete all as specified and as directed. Make: L&T / Legrand /C&S/Havells
M&L submain wiring with two single core PVC insulated, unsheathed, stranded copper conductor cable (FRLS), 1100 volts grade of size 10 Sqmm (nominal area) each and one single core 10 Sqmm (nominal area) as earth continuity conductor drawn into PVC casing capping complete all as specified and directed. NOTE: (i) Rates for PVC casing capping with accessories are deemed to be included in the unit rate.
All as per item No - 188 above but with 2 runs of 4 Sqmm cable with one run of 4 Sqmm cable for earthing.
Taking down ceiling fan and painting of celing fan comlete in situ with synthtic enamel paint by spraying includin filling cavities with filler one coat after cleaning all dust and refixing/ hanging the same all as specified
Taking down exhaust fan of size 230mm and painting of exhaust fan comlete in situ with synthtic enamel paint by spraying includin filling cavities with filler one coat after cleaning all dust and refixing/ hanging the same all as specified
Supply and Fixing/Install New Exhaust Fans PVC body 200 MM Sweep with accessories and eletric connection including taling down old exhaust fan and depositing E/M store yard complete all as specified and as directed. Make:-Havells Ventil Air DX / DX-HS White
Taking down electric storage water heater (geyser) from existing position and keep in safe custody in sore, refixing the same in working condition on existing wall including electric connection and fixing arrangements all as specified
Taking down unserviceable energy meter and depositing to E/M store and suply and fix multi feature with LCD display tamper proof electronic meters with optical Port+Box suitable for A/C single phase, 2 wire, 240 volts system with optical Port, cass 1.0 accuracy as per IS: 13779 & CB IP 88 specification of capacity 10-60 Ams (basic to 60 Amps (maximum) with BOX having under mentioned features including necessary incoming & outgoing connection with existing cable complete all as specified and as directed. Make : L&T or Equivaent
M&L for Earthing complete with galvanized mild steel earth plate electrode size 600x600x6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 part-I, connected to test point complete, all as specified and testing on completion.
Material and labour for cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 Core, including glands, lugs, nut, bolts, washers as required at site, testing complete all as specified and directed.
Excavation in trenches not exceeding 1.5 metres wide and not exceeding1.5 metres in depth and getting out in soft/ loose soil complete all as specified.
M&L for Sand cushioning to underground cables provided with a layer of sand 8cm thick before laying the cable in trenches and 15cm thick after laying the cable in trenches complete all as specified.
M&L for Sub class ‘B’bricks for covering to cable laid dry flat ,with width equal to the length of brick.
M & L for Boring of holes under road, pavement, hard standing by trenchless technology for laying of GI Pipe for LT cable by using necessary machinery including laying of Heavy duty GI pipe of 80 mm dia all as specified and as directed by Engr-in-Charge
S & F Steel pipe glavanized light grade of 40 mm core laid in trenches or under ground/floor or road of fixed with pole for protection of cable/ Earth strip including clams with bolts nuts and wasers complete ass as specifed.
Note: Amount of sch of credit of Rs.48,550/-will be deducted from total amount of BOQ.
J Sams Contructions
M/S YOGESH CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .