Loading
Loading…
Loading…
Tender ID
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.3 LAccepted-AOC 7TH MILE UPPER SHILLONG P O NONGLYER SHILLONG MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793009 | L1 | Accepted-AOC Awarded | |
| 2 | L2₹43.9 L+₹55,815.20 (1.29%)Rejected-Finance C O M KHARKARANG LUMJINGSUK BLOCK A MADANRTING SHILLONG 793021 | SHILLONG | EAST KHASI HILLS | MEGHALAYA | 793021 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹48.1 L+₹4.8 L (11.1%)Rejected-Finance 7TH MILE UPPER SHILLONG P O NONGLYER SHILLONG MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793009 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹48.2 L+₹4.9 L (11.3%)Rejected-Finance 84 POLO HILLS OPPOSITE SBI BRANCH EAST KHASI HILLS SHILLONG MEGHALAYA 793001 | EAST KHASI HILLS | MEGHALAYA | 793001 | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹49.2 L+₹5.9 L (13.5%)Rejected-Finance 7TH MILE UPPER SHILLONG P O NONGLYER SHILLONG 793009 MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793009 | L5 | Rejected-Finance Being L5 |
| Sl No | Description | Qty | Unit | M/S BISWA CONSTRUCTION L7 | M/S RAGHU NATH SAH L9 | M/S DEEDAR ENTERPRISE L1 | M/s Gupta Construction L8 | M/s B.Citymai Syiem L4 | S K ENTERPRISE L5 | Bhuiya Construction L2 | M/S Shillong Supply Syndicate L6 | MAHINDER ELECTRICALS L3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00Material and labour for cleaning of following RCC tank/masonary sumps/water reservoirs including scaffolding and necessary safety precaution, through 7 stages of cleaning and sterilization consisting of three stages of bacteriological screening done by Terbac-G10, Terbac-G5, Terbac-G65 and Ultra Violet ray process complete all as specified and as directed for the following :- Note 1 for cleaning stages:- Stage : I MECHANIZED DEWATERING : This First stage consists of emptying water from the tank. A submersible pump in used to drain the tank of excess of water. Removal of water and semi sludge with the help of Sludge pump (electrical/hydraulic). Stage : II SLUDGE REMOVAL : A sophisticated suction process is used to drain the excess sludge out of tank at a safe place away from tank. Removal of mud, sand and solid particles up to 4 inch size with the hydraulic sludge pupm. Stage : III HIGH PRESSURE CLEANING: The tank in then cleaned using high pressure jet machine. The rotary jet is used to clean walls and ceilings whereas plain jet is used to clean the corners of tank. the rotary jet acts as scrubber and can clean the most stubborn depositions. Cleaning of floor, walls and ceiling with the help of German made high pressure rotary jet pump having pressure range between 80-180 bars. Stage: IV MECHANIZED CLEANING: Mechanical scavenging using Eco-friendly. Health & Safety disinfecting chemical for removing rest over algae in water storage tank's walls to insure minimum harmful pathogens. | ||||||||||||
| 1.00Item No 1.00 contd... Stage: V VACUUM CLEANING: The additional sludge and impurities are then removed by using a Heavy duty ubdustrial vacuum cleaner and are again disposed at a safer place away from the water tank. An industrial vacuum pump is then used to clean the leftover physical impurity from the floor. Stage: VI ANTIBACTERIAL SPRAY: After above steps of cleaning, the tank is treated with a food graded Antibacterial spray FDA recommended disinfecting chemicals to make it cpmpletely bacteria free and safe for use. Stage: VII 3600 UV STERILIZATION: The water storage tank is then treated with 3600 ultra-violet (UV) rediator to make it bacteria free and safe for stiring your drinking water. A specially developed 3600 UV Radiator is used to kill suspended or floating bacteria remaining in the tank. Cleaning should be done twice in a year in every six month or as per the direction of Engr-in-Charge (b) Company will submit Govt. laboratory test certificate of TERBAC-G5, TERBAC-G65, fix the sticker mentioning the date of cleaning & name of site and also provide certificate conforming the competion of sterilization of water tanks mentioning the name of station and date of cleaning. All the cleaning & sterilization should be under accidental insurance coverage. | ||||||||||||
| 1.01 | Semi under ground Clear water sump 50000 gallons capacity 3.5 m in depth. | 2 | Each Job | 85,000 ₹1,70,000 | 82,500 ₹1,65,000 | 65,000 ₹1,30,000 | 83,000 ₹1,66,000 | 81,000 ₹1,62,000 | 79,500 ₹1,59,000 | 18,000 ₹36,000 Lowest | 79,000 ₹1,58,000 | 80,200 ₹1,60,400 |
| 1.02 | Semi under ground Clear water sump 30000 gallons capacity 3.5 m in depth. | 2 | Each Job | 70,000 ₹1,40,000 | 68,200 ₹1,36,400 | 55,000 ₹1,10,000 | 65,000 ₹1,30,000 | 64,000 ₹1,28,000 | 66,500 ₹1,33,000 | 14,000 ₹28,000 Lowest | 65,500 ₹1,31,000 | 65,250 ₹1,30,500 |
| 1.03 | Semi under ground Clear water sump 10000 gallons capacity 3.5 m in depth. | 2 | Each Job | 25,000 ₹50,000 | 24,500 ₹49,000 | 22,500 ₹45,000 | 22,000 ₹44,000 | 21,000 ₹42,000 | 21,950 ₹43,900 | 10,000 ₹20,000 Lowest | 22,150 ₹44,300 | 21,250 ₹42,500 |
| 1.04 | P & S overhead tank of 9600 gallons capacity | 18 | Each Job | 22,500 ₹4,05,000 | 22,600 ₹4,06,800 | 16,500 ₹2,97,000 | 21,500 ₹3,87,000 | 19,000 ₹3,42,000 | 20,600 ₹3,70,800 | 10,000 ₹1,80,000 Lowest | 19,500 ₹3,51,000 | 20,250 ₹3,64,500 |
| 1.05 | RCC overhead tank of 9600 gallons capacity | 2 | Each Job | 18,000 ₹36,000 | 17,900 ₹35,800 | 15,000 ₹30,000 | 17,800 ₹35,600 | 17,000 ₹34,000 | 18,500 ₹37,000 | 10,000 ₹20,000 Lowest | 17,950 ₹35,900 | 18,250 ₹36,500 |
| 1.06 | SWT of 11000 gallons capacity | 13 | Each Job | 12,000 ₹1,56,000 | 11,900 ₹1,54,700 | 10,000 ₹1,30,000 Lowest | 11,850 ₹1,54,050 | 12,000 ₹1,56,000 | 12,350 ₹1,60,550 | 12,000 ₹1,56,000 | 12,850 ₹1,67,050 | 12,250 ₹1,59,250 |
| 2.00 | Material and labour for cement concrete 1:3:6 type C2 using 40 mm graded stone aggregates as in PCC/Road cutting and in foundation or mass concrete if any with cleaning installation area etc complete all as specified. | 7.2 | Cum | 10,500 ₹75,600 | 10,400 ₹74,880 | 8,500 ₹61,200 | 10,525 ₹75,780 | 11,122 ₹80,078.4 | 11,150 ₹80,280 | 7,000 ₹50,400 Lowest | 12,140 ₹87,408 | 11,250 ₹81,000 |
| 3.00 | M & L for preparation of old or previously treated internal and external steel/iron surfaces of over head pressed steel tanks and all steel surfaces of staging and applying one coat of anticorrosive synthetic enamel paint complete including writing of capacity, tank cleaned date etc with white paint of letter size 15 cm on 60 cm x 90 cm size black paint background complete all as directed. | 400 | Sqm | 325 ₹1,30,000 | 320 ₹1,28,000 | 272 ₹1,08,800 | 322 ₹1,28,800 | 304 ₹1,21,600 | 319 ₹1,27,600 | 130 ₹52,000 Lowest | 310 ₹1,24,000 | 285 ₹1,14,000 |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
17 Jul 2025, 6:00 pmClosed
GE I AF Shillong
GE (I) (AF) Shillong Elephant Falls Camp PO Nonglyer Shillong-793009
REPAIR OR REPLACEMENT OF EXTERNAL GI CI DI PPR PIPELINE AND REPAIR OR CLEANING OF UG SUMP, PS TANK, SWT AND ALLIED WORKS AND REPAIR OR REPLACEMENT OF FRESH WATER DISTRIBUTION PIPE LINE, CLEANING OF OVERHEAD SERVICE TANKS AND ALLIED WORKS AT 509 SU,
2025_MES_716829_1
8030/25/E8
Open Tender
Civil Works - Water Works
Item Rate
180 days
GE I AF SHILLONG
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE I AF SHILLONG
₹88,000
Yes
11 Sept 2025
26 Jun 2025
24 Jul 2025
26 Jun 2025
17 Jul 2025
10 Jul 2025
Amount
Material and labour for cleaning of following RCC tank/masonary sumps/water reservoirs including scaffolding and necessary safety precaution, through 7 stages of cleaning and sterilization consisting of three stages of bacteriological screening done by Terbac-G10, Terbac-G5, Terbac-G65 and Ultra Violet ray process complete all as specified and as directed for the following :- Note 1 for cleaning stages:- Stage : I MECHANIZED DEWATERING : This First stage consists of emptying water from the tank. A submersible pump in used to drain the tank of excess of water. Removal of water and semi sludge with the help of Sludge pump (electrical/hydraulic). Stage : II SLUDGE REMOVAL : A sophisticated suction process is used to drain the excess sludge out of tank at a safe place away from tank. Removal of mud, sand and solid particles up to 4 inch size with the hydraulic sludge pupm. Stage : III HIGH PRESSURE CLEANING: The tank in then cleaned using high pressure jet machine. The rotary jet is used to clean walls and ceilings whereas plain jet is used to clean the corners of tank. the rotary jet acts as scrubber and can clean the most stubborn depositions. Cleaning of floor, walls and ceiling with the help of German made high pressure rotary jet pump having pressure range between 80-180 bars. Stage: IV MECHANIZED CLEANING: Mechanical scavenging using Eco-friendly. Health & Safety disinfecting chemical for removing rest over algae in water storage tank's walls to insure minimum harmful pathogens.
Item No 1.00 contd... Stage: V VACUUM CLEANING: The additional sludge and impurities are then removed by using a Heavy duty ubdustrial vacuum cleaner and are again disposed at a safer place away from the water tank. An industrial vacuum pump is then used to clean the leftover physical impurity from the floor. Stage: VI ANTIBACTERIAL SPRAY: After above steps of cleaning, the tank is treated with a food graded Antibacterial spray FDA recommended disinfecting chemicals to make it cpmpletely bacteria free and safe for use. Stage: VII 3600 UV STERILIZATION: The water storage tank is then treated with 3600 ultra-violet (UV) rediator to make it bacteria free and safe for stiring your drinking water. A specially developed 3600 UV Radiator is used to kill suspended or floating bacteria remaining in the tank. Cleaning should be done twice in a year in every six month or as per the direction of Engr-in-Charge (b) Company will submit Govt. laboratory test certificate of TERBAC-G5, TERBAC-G65, fix the sticker mentioning the date of cleaning & name of site and also provide certificate conforming the competion of sterilization of water tanks mentioning the name of station and date of cleaning. All the cleaning & sterilization should be under accidental insurance coverage.
Semi under ground Clear water sump 50000 gallons capacity 3.5 m in depth.
Semi under ground Clear water sump 30000 gallons capacity 3.5 m in depth.
Semi under ground Clear water sump 10000 gallons capacity 3.5 m in depth.
P & S overhead tank of 9600 gallons capacity
RCC overhead tank of 9600 gallons capacity
SWT of 11000 gallons capacity
Material and labour for cement concrete 1:3:6 type C2 using 40 mm graded stone aggregates as in PCC/Road cutting and in foundation or mass concrete if any with cleaning installation area etc complete all as specified.
M & L for preparation of old or previously treated internal and external steel/iron surfaces of over head pressed steel tanks and all steel surfaces of staging and applying one coat of anticorrosive synthetic enamel paint complete including writing of capacity, tank cleaned date etc with white paint of letter size 15 cm on 60 cm x 90 cm size black paint background complete all as directed.
Supply of calcium based granular disinfectant (Calcium Hypo Chlorite) consisting 65%-70% Chlorine Content for Water Treatment Packed in 45 Kg Drum factory sealed delivered at store yard of E/M Office, Laitkor Peak Shillong. Make:- Any brand approved by E-in-C's or any other brand whose product fulfills the parameters specified in Manual on Water Supply and treatment (Third Edition May 1999) issued by CPHEEO,Ministry of Urban Dovelopment, New Delhi. Note :- The brand must contain corrosion inhibitor & Anti Scalling agent to prevent damage of distribution pipelines & accessories.
Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep in soft / loose soil for removing old and laying new pipes , complete all as specified and directed at site.
Returning, filling in, excavated soil including leveling, watering and well ramming in layers of thickness not exceeding 25 cm in each layer complete all as specified and directed.
Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing the soil where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
Disconnecting and taking up or down old existing GI / DI /PPR pipe and connections of any description / grade and in any position in trenches / under floors etc including connected fittings/accessories and fixtures , all as specified and directed for the following sizes :-
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
80 mm bore
Supply, Laying, jointing & testing of Ductile iron (DI), pressure pipes Centrifugally Cast (Spun) Ductile Iron Pressure Pipes with Spigot & Socket end, Class K-9 conforming to IS: 8329/2000 (latest revision) -blast furnace slag cement with Portland cement properties suitable for (push-on) rubber gasket jointing with inside cement mortar lining and Black bitumen external coating, duly ISI marked suitable for push on joint(rubber gasket joint) in any length with inside cement mortar lining, laid in trenches including taking out old one for the following sizes Note:- (i) Excavation & Earthwork, shall be measured and paid separately. (ii) The quoted rate shall deemed to include for provision of joints and jointing material for laying pipes and for jointing pipe fittings or taking branch connection, provision of joints and jointing material shall be measured and paid separately.
100 mm bore
150 mm bore
Supply and fix as in repair jointing of 100 mm bore DI pipes spigot and socket end and fittings with rubber of fibre board gasket, bolts, nuts, washer as in repair complete all as specified and directed.
Supply and fix steel water tubing, galvanized, medium grade, with all fittings like bends, sockets, reducers etc as required in new or old alignment, on floor, trenches, vertically on overhead reservoir,complete all as specified and directed for following sizes:-
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
80 mm bore
Supply and fix as in repairs CI Sluice valve PN-1.6 IS 14846-2000 with Spindle Iron (Heavy duty) Wheel head and both ends flanged and MS nut bolts and washers and pair of rubber/fiber gasket and fixed in position for the following size
150 mm bore
100 mm bore
80 mm bore
Suply and fix as in repair Air release valve with complete accessories such as rubber gasket, bolts (full threaded), nuts & washers including joints as per manufacturer instruction for the following sizes:
150 mm bore
100 mm bore
Supply and fix as in repairs 150 mm bore Non Return valve reflux flanged end including necessary joints complete all as specified.
Supply and fix as in repairs 50 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
Supply and fix as in repairs 15 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
Supply and fix as in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
Supply and fix as in repairs 25 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
Supply and fix as in repairs 40 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
Supply and fix as in repairs CI butterfly valve, BS-5155 Geaoperated with necessary rubber gaskets, nuts and bolts and washers for the following sizes complete all as specified and directed
150 mm bore
100 mm bore
Supply and fix as in repairs upto 150 mm bore DI Bends (any type, radius and angle) tapers any type, (straight, bend, increasing,decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs complete all as specified and directed
Disconnecting existing PVC tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning repairing, etc of following Capacity as directed by Engineer-In-Charge.
500 Litre capacity tank
1000 Litre capacity tank
2000 Litre capacity tank
Supply and fix as in repairs ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified of the following sizes:-
20 mm bore
25 mm bore
32 mm bore
Labour for attending complains against 15 to 40 mm dia GI pipe line upto 3 mtr height from ground level including cutting and threading of pipes as per requirement at site. Note: (a) Pipe and fittings measured and paid separately under supply only item. (b) Ring main unit to ground floor for a building shall be measured and paid as a single Job. (c) Ground Floor to Over head tank for each quarter shall be measured and paid as a single job. (d) Repair of ring main shall be measured and paid under this item.
Labour for attending complains against 15 to 40 mm dia GI pipe line above 3 mtr height including cutting and threading of pipes as per requirement at site. Note: (a) Pipe and fittings measured and paid separately under supply only item. (b) Ring main unit to 1st floor shall be measured and paid as per Item No 24. (c) Above 1st floor to over head tank for each quarter shall be measured and paid as a single job. (d) Repair of ring main shall be measured and paid under this item.
Labour for attending complains against 50 to 80 mm dia GI pipe line including cutting and threading of pipes as per requirement at site. Note: (a) Pipe and fittings measured and paid separately under supply only item. (b) Ring main unit to ground floor for a building shall be measured and paid as a single Job. (c) Ground Floor to 1st floor for each quarter shall be measured and paid as a single job. (d) Above 1st floor to over head tank for each quarter shall be measured and paid as a single job. (e) Repair of ring main shall be measured and paid under this item.
Supply only GI tubing medium grade inclusive GI elbow, Union, TEE, Socket etc. for the following sizes:
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
80 mm bore
Dismantling existing u/s valvepit & Construction of brick masonary valve pit one brick thick wall in cm 1:4 and 100 mm thick PCC 1:4:8 in foundation and 15 mm thick plastering. Providing valve pit cover made of 3 mm thick MS sheet/plate welded with 50x50x6 mm angle iron frame fixed or top of valve pit by means of hold fast 150mm long, embedded in PCC 1:2:4 type B1, bricks of size 230x110x75 including two coat of anticorrsive paint over a coat of red oxide primer and necessary earth work in soft/ loose soil for the following sizes complete all as directed.
120 cm x 120 cm x 120 cm
90 cm x 90 cm x 90 cm
60 cm x 60 cm x 60 cm
Material for burning out lead joint in position, including removing old lead for reuse or in credit for the following pipes:-
100 mm bore
150 mm bore
Supply only run lead joint all as specified for following sizes of CI pipe:-
100 mm bore
150 mm bore
Labour for attending complains against following CI/DI pipe line including cleaning, repairing brusting/ cracks, earth work in excavation/ filling of broken pipes pieces of various length through gas cutting/ manual cutting as per requirement at site and including by using dewatering pumps all as directed by Engineer-In-Charge for the following sizes of pipes:- Note: (a) The labourers shall only be attended the compain and prepared for pipes and fitting for reuse or for credit. The labourers against this items shall not be fixed the pipes and fittings. (b) Lead Joint, New pipe, specials and fittings if required shall be paid under relevant items as above. (c) Mechanical Cutting of existing pipe shall be prepared for fixing of new pipe but the labourers against this items shall not be fixed the pipes and fittings.
100 mm bore
150 mm bore
Surface dressing not exceeding 15 cm deep as in soft/ loose soil and removing the disosal upto 50 mtr from the dressed site complete all as specified
Supply and fix as in repair brass spindle for sluice valve of 100 mm bore inclusive nut, bolts and glands as directed by Engineer-In-Charge.
Supply and fix mild steel joist, channel, angle, or tee sections, fixed independently, with connecting plates (plain or chequered), etc. conforming to Fe-410W (Gde E-250) quality-'A' complete all as specified.
Bhuiya Construction (BID ID -3362564)
MAHINDER ELECTRICALS (BID ID -3361781)
M/s B.Citymai Syiem (BID ID -3361497)
S K ENTERPRISE (BID ID -3361672)
M/S Shillong Supply Syndicate (BID ID -3360305)
M/S BISWA CONSTRUCTION (BID ID -3356651)
M/s Gupta Construction (BID ID -3361207)
M/S RAGHU NATH SAH (BID ID -3360243)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .