Setting up of Specimen room for Surgical pathology at Archival block

Amount

Internal plastering with readymix cement mortar using factory manufactured premix/readymix of roofit mix of M/s Premiere floor to roof materials pvt. Ltd/ Easy Plast of M/s Walpast Product pvt. Ltd/ Readiplast of M/s Ultratech cement Ltd/ Sound Plast PMC-1/ of M/s Sound Buildcare Pvt. Ltd./ or other approved equivalent make having minimum composition of C:S::1:4 using fully treated dry well graded natural sand conforming to IS 383 having low rebound properties, low water demand for curing properties, apply over internal masonary applying as per the manufacturer's specifications including scaffolding cleaning, curing and disposing off debris out of hospital premises, etc. complete all as directed by Engineer-incharge.

MAKING HOLE:Making hole in concrete/brick masonry of required size(approx. 0.9 x 0.9) and refillingit with 1:2:4concrete/brick work with plaster c.m. 1:4 neeru or sandface finish curing including cost of all materials labouretc. carting away dismantled material out ofhospitalpremises all complete as specified anddirected.(In brick work)

CORRUGATED G.I./PPGI SHEET:Providing & fixing corrugated sheet/GI /PPGI sheet closefitted serrated adjustable corrugated /semicorrugatedsheets including overlaps, ridges if requiredincludingsupplying and fixing necessary J or L hooks bolts, nutsas washer and bitumen was hers withscaffolding etc.complete all as directed by theEngineer-in-Charge.(1.00 mm thick with zinc coating not less than 275 gm/m²)

STRUCTURAL STEEL WORK: At all levels including supplying cutting fabricating welding or blotting erecting and fixing in position including painting with a primary coat of approved steel primer, including cost of materials labour with chasing in wall or embedding in floor and making good the same by filling 1:2:4 cement concrete and plastering if necessary all as specified and directed by Engineer-in-Charge.

REMOVING DOORS & WINDOWS:Labour charges only for carefully removing and takingoutexisting steel, wooden doors/woodenpartition/windows/clearstory window shutters from itsexisting position at all floors levels and locations including chiseling around the frame hold fasts cartingaway debris making good the chiseled surface suitablyas per the site requirement and shifting the atdismantled materials to the directed place with stackingin proper order including removing he existingmongeryfittings fixtures locking arrangmeent andreturning thesame to the Department of respectivemaintenance unitetc. complete all as directed by theEngineer-in-Charge.(Of Area beyond 3.00 sq. meter )

REMOVING PLATFORM: Removing of existing platform with sink and pedestal top cudupah or any other stone etc. carefully shifting the materials to the place as per instructions removing debris from the premises cleaning the area making the surfaces good with CM to match the existing surface curing etc. Complete all as specified.

CUDDAPAH Providing & laying 20-35mm thick cuddaph stone slabs in platforms/sinks with all exposed edges machine cut double machine polished in true plane and level with matching cement paste curing finishing the joints neat etc. complete including making grooves in walls for fixing and making good the surfaces.

S.S. SINK: - Providing and fixing in position Stainless Steel sink with drain board or without drain board of Nirali make only resting over bracket with waste coupling including fabricating bracket from 'B' class GI pipe with necessary welding, chiselling in wall and fixing the sink in position with waste coupling, bottle trap all complete as per the specified and directed by engineer-in charge. (510mm x432mm Medium x 190mm)

REMOVING WASH BASIN: Labour charges for removing existing damaged wash basin of any size & colour with all fittings & handing over the same with all fittings at required place to the department as directed by Engineer-In-Charge etc. complete.

KOTA STONE FLOORING: Kota stone flooring / dado / skirting at all floors and levels using 25mm to 30mm thick hand cut/machine cut single mirror polished kota stone slabs laid over 20mm thick cement mortar bedding as specified below close jointed and pointed with matching slurry of cement finished to levels or slope or plumb in quantities as required at site for new work and or repairs to old flooring / dados / skirting including curing etc. complete all as directed by the E-I-C. n flooring hand cut laying in cement mortar 1:3bedding and machine polishing 3 coat after laying.

TEAK WOOD DOOR FRAME Providing wood work with C.P. teak wood in frames for doors windows, ventilators, Air-condition frames, clear story window, false ceiling and partitions etc.wrought framed and fixed in position including applying one coat of approved wood primer to the exposed surfaces and tow coats of bitomastic paint to the surface of wood in contact with masonry/ concrete etc.complete.

FLUSH SHUTTER Providing & fixing in position/flush door of shutters block board solid core internally lipped bonded with water proof type synthetic resin hot pressed with marine ply finished on both faces including prov. And fixing teak wood 20mm thick lipping on all sides fixing heavy duty approved make 4 levers mortice lock with pair of handle of approved make & quality brass/S.S . fittings such as hinges, tower bolts, of approved make fixing fixtures locking arrangements with fixing fixture locking arrangements with screws etc. applying one coat of approved wood primer etc. all complete as specified and directed by Engineer-In-Charge. Door shutters with locking arrangement 4 lever mortice lockwith handle set of approved make. 40mm thck

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 900 x 600 x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, as per the approved sample all as per direction of Engineer-in-charge.

Providing & Applying one / two coats of primer & thereafter two coats of paint as mentioned below of approved make First quality Asian Paints (Apcolite) / Goodlass Nerolac/ ICI to the required colour scheme and as per manufacturers instructions / specifications to the walls, beams, columns, ceilings, partitions doors etc. including thoroughly scrapping the existing surface with sand papers, removing old paint, filling up crevices and Applying and Levelling the existing surface with Birla White Cement based / Coloured waterproof Putti/POP Coat of average thickness of 1 mm or 2 mm as per requirements of approved brands necessary to obtain smooth surface, filling of cracks, removal of stains, painting spots on floors,aluminium window frame & glassetc including scaffolding etc as to the entire satisfaction of engineer in charge.Using Luster Paint

Providing and Applying and Levelling the existing surface with Birla White Cement based / Coloured waterproof Putti of average thickness of 1 mm or 2 mm of approved thickness, brand and manufacture, over the plastered wall surface to prepare the surface even and smooth ready for painting purpose etc complete ( Rate inclusive of Scaffolding Matetrial, Labour Charges) Etc.

Dis-mantling of existing medical Gas system and keeping at Oxygen generator room near Archival Building for future use i.e. vacuum compressor, receiver tank, manifold, change over panel, piping etc as instructed by EIC

Ansaruddin K Khatib

NALANDA DECOR