CA NO GE/AFJ-37/2023-24 REPAIR REPLACEMENT OF PLY TOP/NEWAR TO CHARPOY GI PIPE AT AFS JAMMU UNDER GE (AF) JAMMU

Amount

Taking out existing unserviceable plastic Newar from the GI Pipe charpoy and taking down worned out/unsv components of the GI Pipe charpoy, S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge. FD-220

3 way Galvanized Iron Elbow 32 mm dia. Note weight of each elbow shall not be less than 450 grams

Galvanized iron check nut 32 mm dia. Note :- weight of each check nut shall not be less than 125 grams

Long rail of 32 mm dia galvanized iron pipe medium grade incl threading at both ends as directed

Short rail converted out of retrieved Long rail, Item No 1.03 above incl cutting, threading as required and directed

Leg converted out of retrieved Short rail, Item No 1.04 above incl cutting, threading as required and and directed

Provn of Two Nos MS cleat as shown on drg to hold the MNF set and one MS plate at the bottom to each Leg converted out of retrieved Short rail

Provision of two no 6mm thick x 50 mm width MS flat strip of 900 mm long by drilling four nos screw to long rail all as specifed.

12mm thick ply wood top BWR Grade ISI Marked of size 1950mm x 900mm (Single piece) Make Kitply, centurey and equalent including replacement of old plywood or newar. Provn of 4 x PVC shoes at the bottom of legs of GI pipe charpoy

Taking down worned out/unsv components of the following Furniture items, S&F new component without any crack/any defects as per shape and size specified on respective drawings and as directed by Engineer-in-charge BED PLYTOP WOODEN (FD 246/247)

Replacement of UNSV plywood 3.5mm thick, one side teak face with new plywood 3.5mm thick to Head rest inner and out side as shown on drawing

Replacement of UNSV plywood 3.5mm thick, one side teak face with new plywood 3.5mm thick to Foot rest inner and out side as shown on drawing

Replacement of u/s Long rail made of Ist class of seasoned teak hard wood

Replacement of Short rail made of Ist class of seasoned teak hard wood

Replacement of Stiffener made of Ist class of seasoned teak hard wood

Replacement of unsv legs with new seasoned teak wood

Right angled MS bracket 200mm long x 25mm wide x 3mm thick duly fixed with screw

Replacement of U/S 12mm thick ply wood top BWR Grade ISI Marked of size 1950mm x 900mm (Single piece) Make Kitply, centurey and equalent

BED HARD STEEL( FD/E6/MAP/08(R))

12mm thick ply wood top of size 1950mm x 900mm (Single piece) BWR Grade ISI Mark with MS screws, complete all as specified Make Kitply, century and equivalent

Replacement of 18mm thick prelaminated particle board at head side of the bed as specified

Replacement of 18mm thick prelaminated particle board at foot side of the bed as specified

PVC shoes at the bottom of leg.

Polishing of Wooden Furniture Item : All wooden and steel surfaces of the following furniture items wheather exposed to view or not when placed in position shall be polised with high gloss french polish and painted wit high glossy paint to be finished as directed by Engineer-in-Charge duly preparation of surface with emery paper and applying putty as and where required.

Bed Plytop wooden - FD 246

Bed Hard FD/E6/MAP/08® Painting with two coat of synthetic enamel paint (colour as approved and directed by Engineer-in-Charge) after preparation of surfaces

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II (if applicable) of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

SIARA CONCTRUCTION CO

M/s Sunny Gupta